ARM: configs: Add da850evm_nand to boot from NAND
[oweals/u-boot.git] / include / configs / tao3530.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Configuration settings for the TechNexion TAO-3530 SOM
4  * equipped on Thunder baseboard.
5  *
6  * Edward Lin <linuxfae@technexion.com>
7  * Tapani Utriainen <linuxfae@technexion.com>
8  *
9  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
10  */
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 /*
16  * High Level Configuration Options
17  */
18
19 #include <asm/arch/cpu.h>               /* get chip and board defs */
20 #include <asm/arch/omap.h>
21
22 /* Clock Defines */
23 #define V_OSCK                  26000000        /* Clock output from T2 */
24 #define V_SCLK                  (V_OSCK >> 1)
25
26 #define CONFIG_CMDLINE_TAG
27 #define CONFIG_SETUP_MEMORY_TAGS
28 #define CONFIG_INITRD_TAG
29 #define CONFIG_REVISION_TAG
30
31 /*
32  * Size of malloc() pool
33  */
34 #define CONFIG_SYS_MALLOC_LEN           (4 << 20)
35 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
36
37 /*
38  * Hardware drivers
39  */
40
41 /*
42  * NS16550 Configuration
43  */
44 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
45
46 #define CONFIG_SYS_NS16550_SERIAL
47 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
48 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
49
50 /*
51  * select serial console configuration
52  */
53 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
54
55 /* allow to overwrite serial and ethaddr */
56 #define CONFIG_ENV_OVERWRITE
57
58 /* commands to include */
59
60 #define CONFIG_SYS_I2C
61 #define CONFIG_I2C_MULTI_BUS
62
63 /*
64  * TWL4030
65  */
66
67 /*
68  * Board NAND Info.
69  */
70 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
71                                                         /* to access nand at */
72                                                         /* CS0 */
73
74 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
75                                                         /* devices */
76 /* Environment information */
77
78 #define CONFIG_EXTRA_ENV_SETTINGS \
79         "loadaddr=0x82000000\0" \
80         "console=ttyO2,115200n8\0" \
81         "mpurate=600\0" \
82         "dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \
83         "tv_mode=omapfb.mode=tv:ntsc\0" \
84         "video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \
85         "lcd_mode=omapfb.mode=lcd:800x480@60 \0" \
86         "extra_options= \0" \
87         "mmcdev=0\0" \
88         "mmcroot=/dev/mmcblk0p2 rw\0" \
89         "mmcrootfstype=ext3 rootwait\0" \
90         "nandroot=ubi0:rootfs ubi.mtd=4\0" \
91         "nandrootfstype=ubifs\0" \
92         "mmcargs=setenv bootargs console=${console} " \
93                 "mpurate=${mpurate} " \
94                 "${video_mode} " \
95                 "root=${mmcroot} " \
96                 "rootfstype=${mmcrootfstype} " \
97                 "${extra_options}\0" \
98         "nandargs=setenv bootargs console=${console} " \
99                 "mpurate=${mpurate} " \
100                 "${video_mode} " \
101                 "${network_setting} " \
102                 "root=${nandroot} " \
103                 "rootfstype=${nandrootfstype} "\
104                 "${extra_options}\0" \
105         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
106         "bootscript=echo Running bootscript from mmc ...; " \
107                 "source ${loadaddr}\0" \
108         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
109         "mmcboot=echo Booting from mmc ...; " \
110                 "run mmcargs; " \
111                 "bootm ${loadaddr}\0" \
112         "nandboot=echo Booting from nand ...; " \
113                 "run nandargs; " \
114                 "nand read ${loadaddr} 280000 400000; " \
115                 "bootm ${loadaddr}\0" \
116
117 #define CONFIG_BOOTCOMMAND \
118         "if mmc rescan ${mmcdev}; then " \
119                 "if run loadbootscript; then " \
120                         "run bootscript; " \
121                 "else " \
122                         "if run loaduimage; then " \
123                                 "run mmcboot; " \
124                         "else run nandboot; " \
125                         "fi; " \
126                 "fi; " \
127         "else run nandboot; fi"
128
129 /*
130  * Miscellaneous configurable options
131  */
132
133 /* turn on command-line edit/hist/auto */
134
135 #define CONFIG_SYS_MEMTEST_START        (0x82000000)            /* memtest */
136                                                                 /* defaults */
137 #define CONFIG_SYS_MEMTEST_END          (0x83FFFFFF)            /* 64MB */
138 #define CONFIG_SYS_MEMTEST_SCRATCH      (0x81000000)    /* dummy address */
139
140 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)     /* default */
141                                                         /* load address */
142
143 /*
144  * OMAP3 has 12 GP timers, they can be driven by the system clock
145  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
146  * This rate is divided by a local divisor.
147  */
148 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
149 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
150
151 /*
152  * Physical Memory Map
153  */
154 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
155 #define PHYS_SDRAM_1_SIZE       (32 << 20)      /* at least 32 MiB */
156 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
157
158 /*
159  * FLASH and environment organization
160  */
161
162 /* **** PISMO SUPPORT *** */
163 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
164 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
165
166 /* Monitor at start of flash */
167 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
168 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
169
170 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
171
172 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)
173 #define CONFIG_ENV_OFFSET               0x260000
174 #define CONFIG_ENV_ADDR                 CONFIG_ENV_OFFSET
175
176 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
177 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
178 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
179 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
180                                          CONFIG_SYS_INIT_RAM_SIZE - \
181                                          GENERATED_GBL_DATA_SIZE)
182
183 /*
184  * USB
185  *
186  * Currently only EHCI is enabled, the MUSB OTG controller
187  * is not enabled.
188  */
189
190 /* USB EHCI */
191 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO        162
192
193 /* Defines for SPL */
194
195 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
196 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
197
198 #define CONFIG_SPL_NAND_BASE
199 #define CONFIG_SPL_NAND_DRIVERS
200 #define CONFIG_SPL_NAND_ECC
201
202 /* NAND boot config */
203 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
204 #define CONFIG_SYS_NAND_PAGE_COUNT      64
205 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
206 #define CONFIG_SYS_NAND_OOBSIZE         64
207 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
208 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
209 /*
210  * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
211  * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
212  */
213 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
214                                          10, 11, 12, 13 }
215 #define CONFIG_SYS_NAND_ECCSIZE         512
216 #define CONFIG_SYS_NAND_ECCBYTES        3
217 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
218
219 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
220 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
221
222 #define CONFIG_SPL_TEXT_BASE            0x40200800
223 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
224                                          CONFIG_SPL_TEXT_BASE)
225
226 /*
227  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
228  * older x-loader implementations. And move the BSS area so that it
229  * doesn't overlap with TEXT_BASE.
230  */
231 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
232 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
233
234 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
235 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
236
237 #endif /* __CONFIG_H */