1 /* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
3 * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
5 * Configuration settings for the STM32MP15x CPU
10 #include <linux/sizes.h>
11 #include <asm/arch/stm32.h>
14 * Number of clock ticks in 1 sec
16 #define CONFIG_SYS_HZ 1000
18 #ifndef CONFIG_STM32MP1_TRUSTED
20 #define CONFIG_ARMV7_PSCI_1_0
21 #define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE
22 #define CONFIG_ARMV7_SECURE_MAX_SIZE STM32_SYSRAM_SIZE
28 #define CONFIG_SYS_MALLOC_LEN SZ_32M
31 * Configuration of the external SRAM memory used by U-Boot
33 #define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE
34 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
37 * Console I/O buffer size
39 #define CONFIG_SYS_CBSIZE SZ_1K
44 #define CONFIG_SYS_LOAD_ADDR STM32_DDR_BASE
49 #define CONFIG_ENV_SIZE SZ_4K
52 #define CONFIG_CMDLINE_TAG
53 #define CONFIG_SETUP_MEMORY_TAGS
54 #define CONFIG_INITRD_TAG
58 /* BOOTROM load address */
59 #define CONFIG_SPL_TEXT_BASE 0x2FFC2500
61 #define CONFIG_SPL_BSS_START_ADDR 0xC0200000
62 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
63 #define CONFIG_SYS_SPL_MALLOC_START 0xC0300000
64 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
66 /* limit SYSRAM usage to first 128 KB */
67 #define CONFIG_SPL_MAX_SIZE 0x00020000
68 #define CONFIG_SPL_STACK (STM32_SYSRAM_BASE + \
70 #endif /* #ifdef CONFIG_SPL */
73 #define CONFIG_SYS_MMC_MAX_DEVICE 3
74 #define CONFIG_SUPPORT_EMMC_BOOT
76 /*****************************************************************************/
77 #ifdef CONFIG_DISTRO_DEFAULTS
78 /*****************************************************************************/
80 #if !defined(CONFIG_SPL_BUILD)
82 #define BOOT_TARGET_DEVICES(func) \
87 * bootcmd for stm32mp1:
88 * for serial/usb: execute the stm32prog command
89 * for mmc boot (eMMC, SD card), boot only on the same device
90 * for nand boot, boot with on ubifs partition on nand
91 * for nor boot, use the default order
93 #define CONFIG_PREBOOT
95 #define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
96 "echo \"Boot over ${boot_device}${boot_instance}!\";" \
97 "if test ${boot_device} = serial || test ${boot_device} = usb;" \
98 "then stm32prog ${boot_device} ${boot_instance}; " \
100 "if test ${boot_device} = mmc;" \
101 "then env set boot_targets \"mmc${boot_instance}\"; fi;" \
102 "if test ${boot_device} = nand;" \
103 "then env set boot_targets ubifs0; fi;" \
104 "run distro_bootcmd;" \
107 #include <config_distro_bootcmd.h>
109 #define CONFIG_EXTRA_ENV_SETTINGS \
110 "scriptaddr=0xC0000000\0" \
111 "pxefile_addr_r=0xC0000000\0" \
112 "kernel_addr_r=0xC1000000\0" \
113 "fdt_addr_r=0xC4000000\0" \
114 "ramdisk_addr_r=0xC4100000\0" \
115 "fdt_high=0xffffffff\0" \
116 "initrd_high=0xffffffff\0" \
120 #endif /* ifndef CONFIG_SPL_BUILD */
121 #endif /* ifdef CONFIG_DISTRO_DEFAULTS*/
123 #endif /* __CONFIG_H */