2 * LG Optimus Black codename sniper config
4 * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
19 #define CONFIG_ARM_ARCH_CP15_ERRATA
31 #define CONFIG_MISC_INIT_R
37 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
38 #define CONFIG_SYS_PTV 2
40 #define V_NS16550_CLK 48000000
41 #define V_OSCK 26000000
42 #define V_SCLK (V_OSCK >> 1)
49 #define CONFIG_NR_DRAM_BANKS 2
50 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
51 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
57 #define CONFIG_SYS_TEXT_BASE 0x80100000
58 #define CONFIG_SYS_SDRAM_BASE 0x80000000
59 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
60 GENERATED_GBL_DATA_SIZE)
62 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
68 #define CONFIG_OMAP_GPIO
69 #define CONFIG_OMAP3_GPIO_2
70 #define CONFIG_OMAP3_GPIO_3
71 #define CONFIG_OMAP3_GPIO_4
72 #define CONFIG_OMAP3_GPIO_5
73 #define CONFIG_OMAP3_GPIO_6
79 #define CONFIG_SYS_I2C
80 #define CONFIG_SYS_OMAP24_I2C_SPEED 400000
81 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
82 #define CONFIG_SYS_I2C_OMAP34XX
83 #define CONFIG_I2C_MULTI_BUS
89 #define CONFIG_TWL4030_POWER
95 #define CONFIG_TWL4030_INPUT
101 #define CONFIG_SPL_FRAMEWORK
103 #define CONFIG_SPL_TEXT_BASE 0x40200000
104 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
105 CONFIG_SPL_TEXT_BASE)
106 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
107 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
108 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
109 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
110 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
112 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
113 #define CONFIG_SPL_BOARD_INIT
115 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
116 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
118 #define CONFIG_AUTO_COMPLETE
120 #define CONFIG_SYS_LONGHELP
122 #define CONFIG_SYS_MAXARGS 16
123 #define CONFIG_SYS_CBSIZE 512
124 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
131 #ifdef CONFIG_SPL_BUILD
132 #define CONFIG_SYS_NS16550_SERIAL
133 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
136 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
137 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
138 #define CONFIG_CONS_INDEX 3
140 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
147 #define CONFIG_USB_MUSB_PIO_ONLY
148 #define CONFIG_USB_MUSB_OMAP2PLUS
149 #define CONFIG_TWL4030_USB
155 #define CONFIG_USB_FUNCTION_FASTBOOT
157 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
158 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
160 #define CONFIG_FASTBOOT_FLASH
161 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
163 #define CONFIG_CMD_FASTBOOT
169 #define CONFIG_ENV_SIZE (128 * 1024)
170 #define CONFIG_ENV_IS_NOWHERE
172 #define CONFIG_ENV_OVERWRITE
174 #define CONFIG_EXTRA_ENV_SETTINGS \
175 "kernel_addr_r=0x82000000\0" \
176 "loadaddr=0x82000000\0" \
177 "fdt_addr_r=0x88000000\0" \
178 "fdtaddr=0x88000000\0" \
179 "ramdisk_addr_r=0x88080000\0" \
180 "pxefile_addr_r=0x80100000\0" \
181 "scriptaddr=0x80000000\0" \
182 "bootm_size=0x10000000\0" \
184 "kernel_mmc_part=3\0" \
185 "recovery_mmc_part=4\0" \
186 "fdtfile=omap3-sniper.dtb\0" \
187 "bootfile=/boot/extlinux/extlinux.conf\0" \
188 "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
194 #define CONFIG_SETUP_MEMORY_TAGS
195 #define CONFIG_CMDLINE_TAG
196 #define CONFIG_INITRD_TAG
197 #define CONFIG_REVISION_TAG
198 #define CONFIG_SERIAL_TAG
204 #define CONFIG_SYS_LOAD_ADDR 0x82000000
206 #define CONFIG_ANDROID_BOOT_IMAGE
208 #define CONFIG_BOOTCOMMAND \
209 "setenv boot_mmc_part ${kernel_mmc_part}; " \
210 "if test reboot-${reboot-mode} = reboot-r; then " \
211 "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
212 "if test reboot-${reboot-mode} = reboot-b; then " \
213 "echo fastboot; fastboot 0; fi; " \
214 "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
215 "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
216 "mmc dev ${boot_mmc_dev}; " \
217 "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
218 "bootm ${kernel_addr_r};"
224 #include <config_defaults.h>
225 #include <config_distro_defaults.h>