2 * LG Optimus Black codename sniper config
4 * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
19 #define CONFIG_SYS_CACHELINE_SIZE 64
21 #define CONFIG_ARM_ARCH_CP15_ERRATA
22 #define CONFIG_ARM_ERRATA_454179
23 #define CONFIG_ARM_ERRATA_430973
24 #define CONFIG_ARM_ERRATA_621766
31 #define CONFIG_OMAP_COMMON
37 #define CONFIG_MISC_INIT_R
43 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
44 #define CONFIG_SYS_PTV 2
46 #define V_NS16550_CLK 48000000
47 #define V_OSCK 26000000
48 #define V_SCLK (V_OSCK >> 1)
55 #define CONFIG_NR_DRAM_BANKS 2
56 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
57 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
63 #define CONFIG_SYS_TEXT_BASE 0x80100000
64 #define CONFIG_SYS_SDRAM_BASE 0x80000000
65 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
66 GENERATED_GBL_DATA_SIZE)
68 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
74 #define CONFIG_OMAP_GPIO
75 #define CONFIG_OMAP3_GPIO_2
76 #define CONFIG_OMAP3_GPIO_3
77 #define CONFIG_OMAP3_GPIO_4
78 #define CONFIG_OMAP3_GPIO_5
79 #define CONFIG_OMAP3_GPIO_6
85 #define CONFIG_SYS_I2C
86 #define CONFIG_SYS_OMAP24_I2C_SPEED 400000
87 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
88 #define CONFIG_SYS_I2C_OMAP34XX
89 #define CONFIG_I2C_MULTI_BUS
91 #define CONFIG_CMD_I2C
97 #define CONFIG_SYS_NO_FLASH
104 #define CONFIG_GENERIC_MMC
105 #define CONFIG_OMAP_HSMMC
107 #define CONFIG_CMD_MMC
113 #define CONFIG_TWL4030_POWER
119 #define CONFIG_TWL4030_INPUT
125 #define CONFIG_PARTITION_UUIDS
126 #define CONFIG_CMD_PART
132 #define CONFIG_SPL_FRAMEWORK
134 #define CONFIG_SPL_TEXT_BASE 0x40200000
135 #define CONFIG_SPL_MAX_SIZE (54 * 1024)
136 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
137 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
138 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
139 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
140 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
142 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
143 #define CONFIG_SPL_BOARD_INIT
145 #define CONFIG_SPL_LIBGENERIC_SUPPORT
146 #define CONFIG_SPL_LIBCOMMON_SUPPORT
147 #define CONFIG_SPL_LIBDISK_SUPPORT
148 #define CONFIG_SPL_SERIAL_SUPPORT
149 #define CONFIG_SPL_POWER_SUPPORT
150 #define CONFIG_SPL_GPIO_SUPPORT
151 #define CONFIG_SPL_I2C_SUPPORT
152 #define CONFIG_SPL_MMC_SUPPORT
153 #define CONFIG_SPL_FAT_SUPPORT
155 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
157 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
158 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
164 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
166 #define CONFIG_DISPLAY_CPUINFO
167 #define CONFIG_DISPLAY_BOARDINFO
169 #define CONFIG_AUTO_COMPLETE
171 #define CONFIG_SYS_LONGHELP
172 #define CONFIG_SYS_HUSH_PARSER
174 #define CONFIG_SYS_MAXARGS 16
175 #define CONFIG_SYS_CBSIZE 512
176 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
183 #ifdef CONFIG_SPL_BUILD
184 #define CONFIG_SYS_NS16550_SERIAL
185 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
188 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
189 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
190 #define CONFIG_CONS_INDEX 3
192 #define CONFIG_BAUDRATE 115200
193 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
200 #define CONFIG_USB_MUSB_PIO_ONLY
201 #define CONFIG_USB_MUSB_OMAP2PLUS
202 #define CONFIG_TWL4030_USB
204 #define CONFIG_USB_GADGET_DUALSPEED
205 #define CONFIG_USB_GADGET_VBUS_DRAW 0
211 #define CONFIG_USB_GADGET_DOWNLOAD
213 #define CONFIG_G_DNL_VENDOR_NUM 0x0451
214 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022
215 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
221 #define CONFIG_USB_FUNCTION_FASTBOOT
223 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
224 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
226 #define CONFIG_FASTBOOT_FLASH
227 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
229 #define CONFIG_CMD_FASTBOOT
235 #define CONFIG_ENV_SIZE (128 * 1024)
236 #define CONFIG_ENV_IS_NOWHERE
238 #define CONFIG_ENV_OVERWRITE
240 #define CONFIG_EXTRA_ENV_SETTINGS \
241 "kernel_addr_r=0x82000000\0" \
242 "loadaddr=0x82000000\0" \
243 "fdt_addr_r=0x88000000\0" \
244 "fdtaddr=0x88000000\0" \
245 "ramdisk_addr_r=0x88080000\0" \
246 "pxefile_addr_r=0x80100000\0" \
247 "scriptaddr=0x80000000\0" \
248 "bootm_size=0x10000000\0" \
250 "kernel_mmc_part=3\0" \
251 "recovery_mmc_part=4\0" \
252 "fdtfile=omap3-sniper.dtb\0" \
253 "bootfile=/boot/extlinux/extlinux.conf\0" \
254 "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
260 #define CONFIG_SETUP_MEMORY_TAGS
261 #define CONFIG_CMDLINE_TAG
262 #define CONFIG_INITRD_TAG
263 #define CONFIG_REVISION_TAG
264 #define CONFIG_SERIAL_TAG
270 #define CONFIG_SYS_LOAD_ADDR 0x82000000
272 #define CONFIG_ANDROID_BOOT_IMAGE
274 #define CONFIG_BOOTCOMMAND \
275 "setenv boot_mmc_part ${kernel_mmc_part}; " \
276 "if test reboot-${reboot-mode} = reboot-r; then " \
277 "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
278 "if test reboot-${reboot-mode} = reboot-b; then " \
279 "echo fastboot; fastboot 0; fi; " \
280 "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
281 "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
282 "mmc dev ${boot_mmc_dev}; " \
283 "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
284 "bootm ${kernel_addr_r};"
290 #include <config_defaults.h>
291 #include <config_distro_defaults.h>