include/configs/siemens-am33x-common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * siemens am33x common board options
   4  * (C) Copyright 2013 Siemens Schweiz AG
   5  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   6  *
   7  * Based on:
   8  * U-Boot file:/include/configs/am335x_evm.h
   9  *
  10  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  11  */
  12
  13 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
  14 #define __CONFIG_SIEMENS_AM33X_COMMON_H
  15
  16 #include <asm/arch/omap.h>
  17
  18 #define CONFIG_DMA_COHERENT
  19 #define CONFIG_DMA_COHERENT_SIZE        (1 << 20)
  20
  21 #define CONFIG_ENV_SIZE                 (0x2000)
  22 #define CONFIG_SYS_MALLOC_LEN           (16 * 1024 * 1024)
  23 #ifdef CONFIG_SIEMENS_MACH_TYPE
  24 #define CONFIG_MACH_TYPE                CONFIG_SIEMENS_MACH_TYPE
  25 #endif
  26
  27 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  28 #define CONFIG_SETUP_MEMORY_TAGS
  29 #define CONFIG_INITRD_TAG
  30
  31 /* commands to include */
  32
  33 #ifndef CONFIG_SPL_BUILD
  34 #define CONFIG_ROOTPATH         "/opt/eldk"
  35 #endif
  36
  37 #define CONFIG_ENV_OVERWRITE            1
  38
  39 #define CONFIG_SYS_AUTOLOAD     "yes"
  40
  41 /* Clock Defines */
  42 #define V_OSCK                          24000000  /* Clock output from T2 */
  43 #define V_SCLK                          (V_OSCK)
  44
  45 /* We set the max number of command args high to avoid HUSH bugs. */
  46 #define CONFIG_SYS_MAXARGS              32
  47
  48 /* Console I/O Buffer Size */
  49 #define CONFIG_SYS_CBSIZE               1024
  50
  51 /* Boot Argument Buffer Size */
  52 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  53
  54 /*
  55  * memtest works on 8 MB in DRAM after skipping 32MB from
  56  * start addr of ram disk
  57  */
  58 #define CONFIG_SYS_MEMTEST_START        (PHYS_DRAM_1 + (64 * 1024 * 1024))
  59 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START \
  60                                         + (8 * 1024 * 1024))
  61
  62 #define CONFIG_SYS_LOAD_ADDR            0x81000000 /* Default load address */
  63
  64 #define CONFIG_MTD_DEVICE
  65 #define CONFIG_SF_DEFAULT_SPEED         (75000000)
  66
  67  /* Physical Memory Map */
  68 #define CONFIG_NR_DRAM_BANKS            1               /*  1 bank of DRAM */
  69 #define PHYS_DRAM_1                     0x80000000      /* DRAM Bank #1 */
  70
  71 #define CONFIG_SYS_SDRAM_BASE           PHYS_DRAM_1
  72 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
  73                                                 GENERATED_GBL_DATA_SIZE)
  74  /* Platform/Board specific defs */
  75 #define CONFIG_SYS_TIMERBASE            0x48040000      /* Use Timer2 */
  76 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
  77
  78 /* NS16550 Configuration */
  79 #ifdef CONFIG_SPL_BUILD
  80 #define CONFIG_SYS_NS16550_SERIAL
  81 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  82 #endif
  83 #define CONFIG_SYS_NS16550_CLK          (48000000)
  84 #define CONFIG_SYS_NS16550_COM1         0x44e09000
  85 #define CONFIG_SYS_NS16550_COM4         0x481a6000
  86
  87 #define CONFIG_SERIAL1                  1
  88
  89 /* I2C Configuration */
  90 #define CONFIG_I2C
  91 #define CONFIG_SYS_I2C
  92
  93 /* Defines for SPL */
  94 #define CONFIG_SPL_TEXT_BASE            0x402F0400
  95 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
  96                                          CONFIG_SPL_TEXT_BASE)
  97
  98 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
  99 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 100
 101 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 102 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 103
 104 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 105
 106 #define CONFIG_SPL_NAND_BASE
 107 #define CONFIG_SPL_NAND_DRIVERS
 108 #define CONFIG_SPL_NAND_ECC
 109 #define CONFIG_SYS_NAND_ONFI_DETECTION
 110 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 111 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 112                                          CONFIG_SYS_NAND_PAGE_SIZE)
 113 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 114 #define CONFIG_SYS_NAND_OOBSIZE         64
 115 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 116 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 117 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 118                                          10, 11, 12, 13, 14, 15, 16, 17, \
 119                                          18, 19, 20, 21, 22, 23, 24, 25, \
 120                                          26, 27, 28, 29, 30, 31, 32, 33, \
 121                                          34, 35, 36, 37, 38, 39, 40, 41, \
 122                                          42, 43, 44, 45, 46, 47, 48, 49, \
 123                                          50, 51, 52, 53, 54, 55, 56, 57, }
 124
 125 #define CONFIG_SYS_NAND_ECCSIZE         512
 126 #define CONFIG_SYS_NAND_ECCBYTES        14
 127 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 128
 129 #define CONFIG_SYS_NAND_ECCSTEPS        4
 130 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * \
 131                                                 CONFIG_SYS_NAND_ECCSTEPS)
 132
 133 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 134
 135 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 136
 137 /*
 138  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 139  * 64 bytes before this address should be set aside for u-boot.img's
 140  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 141  * other needs.
 142  */
 143 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 144 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 145
 146 /*
 147  * Since SPL did pll and ddr initialization for us,
 148  * we don't need to do it twice.
 149  */
 150 #ifndef CONFIG_SPL_BUILD
 151 #define CONFIG_SKIP_LOWLEVEL_INIT
 152 #endif
 153
 154 #ifndef CONFIG_SPL_BUILD
 155 /*
 156  * USB configuration
 157  */
 158 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 159
 160 #define CONFIG_AM335X_USB0
 161 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 162 #define CONFIG_AM335X_USB1
 163 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 164
 165 /* USB DRACO ID as default */
 166 #define CONFIG_USBD_HS
 167
 168 /* USB Device Firmware Update support */
 169 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (1 << 20)
 170 #define DFU_MANIFEST_POLL_TIMEOUT       25000
 171
 172 #endif /* CONFIG_SPL_BUILD */
 173
 174 /*
 175  * Default to using SPI for environment, etc.  We have multiple copies
 176  * of SPL as the ROM will check these locations.
 177  * 0x0 - 0x20000 : First copy of SPL
 178  * 0x20000 - 0x40000 : Second copy of SPL
 179  * 0x40000 - 0x60000 : Third copy of SPL
 180  * 0x60000 - 0x80000 : Fourth copy of SPL
 181  * 0x80000 - 0xDF000 : U-Boot
 182  * 0xDF000 - 0xE0000 : U-Boot Environment
 183  * 0xE0000 - 0x442000 : Linux Kernel
 184  * 0x442000 - 0x800000 : Userland
 185  */
 186 #if defined(CONFIG_SPI_BOOT)
 187 # define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 188 # define CONFIG_ENV_OFFSET              (892 << 10) /* 892 KiB in */
 189 # define CONFIG_ENV_SECT_SIZE           (4 << 10) /* 4 KB sectors */
 190 #endif /* SPI support */
 191
 192 #define CONFIG_MII
 193 #define CONFIG_BOOTP_DEFAULT
 194 #define CONFIG_BOOTP_DNS2
 195 #define CONFIG_BOOTP_SEND_HOSTNAME
 196 #define CONFIG_NET_RETRY_COUNT         10
 197
 198 /* NAND support */
 199 #ifdef CONFIG_NAND
 200 /* UBI Support */
 201 #ifndef CONFIG_SPL_BUILD
 202 #define CONFIG_MTD_PARTITIONS
 203 #define CONFIG_MTD_DEVICE
 204 #endif
 205
 206 /* Commen environment */
 207 #define CONFIG_PREBOOT
 208 #define COMMON_ENV_DFU_ARGS     "dfu_args=run bootargs_defaults;" \
 209                                 "setenv bootargs ${bootargs};" \
 210                                 "mtdparts default;" \
 211                                 "draco_led 1;" \
 212                                 "dfu 0 nand 0;" \
 213                                 "draco_led 0;\0" \
 214
 215 #define COMMON_ENV_NAND_BOOT \
 216                 "nand_boot=echo Booting from nand; " \
 217                 "if test ${upgrade_available} -eq 1; then " \
 218                         "if test ${bootcount} -gt ${bootlimit}; " \
 219                                 "then " \
 220                                 "setenv upgrade_available 0;" \
 221                                 "setenv ${partitionset_active} true;" \
 222                                 "if test -n ${A}; then " \
 223                                         "setenv partitionset_active B; " \
 224                                         "env delete A; " \
 225                                 "fi;" \
 226                                 "if test -n ${B}; then " \
 227                                         "setenv partitionset_active A; " \
 228                                         "env delete B; " \
 229                                 "fi;" \
 230                                 "saveenv; " \
 231                         "fi;" \
 232                 "fi;" \
 233                 "echo set ${partitionset_active}...;" \
 234                 "run nand_args; "
 235
 236 #define COMMON_ENV_NAND_CMDS    "flash_self=run nand_boot\0" \
 237                                 "flash_self_test=setenv testargs test; " \
 238                                         "run nand_boot\0" \
 239                                 "dfu_start=echo Preparing for dfu mode ...; " \
 240                                 "run dfu_args; \0"
 241
 242 #define COMMON_ENV_SETTINGS \
 243         "verify=no \0" \
 244         "project_dir=targetdir\0" \
 245         "upgrade_available=0\0" \
 246         "altbootcmd=run bootcmd\0" \
 247         "bootlimit=3\0" \
 248         "partitionset_active=A\0" \
 249         "loadaddr=0x82000000\0" \
 250         "kloadaddr=0x81000000\0" \
 251         "script_addr=0x81900000\0" \
 252         "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
 253         "nfsopts=nolock rw\0" \
 254         "ip_method=none\0" \
 255         "bootenv=uEnv.txt\0" \
 256         "bootargs_defaults=setenv bootargs " \
 257                 "console=${console} " \
 258                 "${testargs} " \
 259                 "${optargs}\0" \
 260         "siemens_help=echo; "\
 261                 "echo Type 'run flash_self' to use kernel and root " \
 262                 "filesystem on memory; echo Type 'run flash_self_test' to " \
 263                 "use kernel and root filesystem on memory, boot in test " \
 264                 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
 265                 "from memory and root filesystem over NFS; echo Type " \
 266                 "'run net_nfs' to get Kernel over TFTP and mount root " \
 267                 "filesystem over NFS; " \
 268                 "echo Set partitionset_active variable to 'A' " \
 269                 "or 'B' to select kernel and rootfs partition; " \
 270                 "echo" \
 271                 "\0"
 272
 273 /*
 274  * Variant 1 partition layout
 275  * chip-size = 256MiB
 276  *|         name |        size |           address area |
 277  *-------------------------------------------------------
 278  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 279  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 280  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 281  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 282  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 283  *|    uboot.env | 128.000 KiB | 0x  260000..0x  27ffff |
 284  *|     kernel_a |   5.000 MiB | 0x  280000..0x  77ffff |
 285  *|     kernel_b |   5.000 MiB | 0x  780000..0x  c7ffff |
 286  *|      mtdoops |   8.000 MiB | 0x  c80000..0x 147ffff |
 287  *|       rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
 288  *-------------------------------------------------------
 289
 290                                         "mtdparts=omap2-nand.0:" \
 291                                         "128k(spl),"            \
 292                                         "128k(spl.backup1),"    \
 293                                         "128k(spl.backup2),"    \
 294                                         "128k(spl.backup3),"    \
 295                                         "1920k(u-boot),"        \
 296                                         "128k(uboot.env),"      \
 297                                         "5120k(kernel_a),"      \
 298                                         "5120k(kernel_b),"      \
 299                                         "8192k(mtdoops),"       \
 300                                         "-(rootfs)"
 301  */
 302
 303 #define DFU_ALT_INFO_NAND_V1 \
 304         "spl part 0 1;" \
 305         "spl.backup1 part 0 2;" \
 306         "spl.backup2 part 0 3;" \
 307         "spl.backup3 part 0 4;" \
 308         "u-boot part 0 5;" \
 309         "u-boot.env part 0 6;" \
 310         "kernel_a part 0 7;" \
 311         "kernel_b part 0 8;" \
 312         "rootfs partubi 0 10"
 313
 314 #define CONFIG_ENV_SETTINGS_NAND_V1 \
 315         "nand_active_ubi_vol=rootfs_a\0" \
 316         "nand_active_ubi_vol_A=rootfs_a\0" \
 317         "nand_active_ubi_vol_B=rootfs_b\0" \
 318         "nand_root_fs_type=ubifs rootwait=1\0" \
 319         "nand_src_addr=0x280000\0" \
 320         "nand_src_addr_A=0x280000\0" \
 321         "nand_src_addr_B=0x780000\0" \
 322         "nand_args=run bootargs_defaults;" \
 323                 "mtdparts default;" \
 324                 "setenv ${partitionset_active} true;" \
 325                 "if test -n ${A}; then " \
 326                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
 327                         "setenv nand_src_addr ${nand_src_addr_A};" \
 328                 "fi;" \
 329                 "if test -n ${B}; then " \
 330                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
 331                         "setenv nand_src_addr ${nand_src_addr_B};" \
 332                 "fi;" \
 333                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 334                 "ubi.mtd=9,${ubi_off};" \
 335                 "setenv bootargs ${bootargs} " \
 336                 "root=${nand_root} noinitrd ${mtdparts} " \
 337                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 338                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 339                 "=mtdoops\0" \
 340         COMMON_ENV_DFU_ARGS \
 341                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
 342         COMMON_ENV_NAND_BOOT \
 343                 "nand read.i ${kloadaddr} ${nand_src_addr} " \
 344                 "${nand_img_size}; bootm ${kloadaddr}\0" \
 345         COMMON_ENV_NAND_CMDS
 346
 347 #define CONFIG_ENV_SETTINGS_V1 \
 348                 COMMON_ENV_SETTINGS \
 349         "net_args=run bootargs_defaults;" \
 350                 "mtdparts default;" \
 351                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 352                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 353                 "setenv bootargs ${bootargs} " \
 354                 "root=/dev/nfs ${mtdparts} " \
 355                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 356                 "ip=${ipaddr}:${serverip}:" \
 357                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 358         "net_nfs=echo Booting from network ...; " \
 359                 "run net_args; " \
 360                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 361                 "bootm ${kloadaddr}\0"
 362
 363 /*
 364  * Variant 2 partition layout (default)
 365  * chip-size = 256MiB or 512 MiB
 366  *|         name |        size |           address area |
 367  *-------------------------------------------------------
 368  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 369  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 370  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 371  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 372  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 373  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 374  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 375  *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
 376  *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
 377  *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
 378  *-------------------------------------------------------
 379  */
 380
 381 #define DFU_ALT_INFO_NAND_V2 \
 382         "spl part 0 1;" \
 383         "spl.backup1 part 0 2;" \
 384         "spl.backup2 part 0 3;" \
 385         "spl.backup3 part 0 4;" \
 386         "u-boot part 0 5;" \
 387         "u-boot.env0 part 0 6;" \
 388         "u-boot.env1 part 0 7;" \
 389         "rootfs partubi 0 9" \
 390
 391 #define CONFIG_ENV_SETTINGS_NAND_V2 \
 392         "nand_active_ubi_vol=rootfs_a\0" \
 393         "rootfs_name=rootfs\0" \
 394         "kernel_name=uImage\0"\
 395         "nand_root_fs_type=ubifs rootwait=1\0" \
 396         "nand_args=run bootargs_defaults;" \
 397                 "mtdparts default;" \
 398                 "setenv ${partitionset_active} true;" \
 399                 "if test -n ${A}; then " \
 400                         "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
 401                 "fi;" \
 402                 "if test -n ${B}; then " \
 403                         "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 404                 "fi;" \
 405                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 406                 "ubi.mtd=rootfs,2048;" \
 407                 "setenv bootargs ${bootargs} " \
 408                 "root=${nand_root} noinitrd ${mtdparts} " \
 409                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 410                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 411                 "=mtdoops\0" \
 412         COMMON_ENV_DFU_ARGS \
 413                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
 414         COMMON_ENV_NAND_BOOT \
 415                 "ubi part rootfs ${ubi_off};" \
 416                 "ubifsmount ubi0:${nand_active_ubi_vol};" \
 417                 "ubifsload ${kloadaddr} boot/${kernel_name};" \
 418                 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
 419                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 420         "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
 421                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 422         COMMON_ENV_NAND_CMDS
 423
 424 #define CONFIG_ENV_SETTINGS_V2 \
 425                 COMMON_ENV_SETTINGS \
 426         "net_args=run bootargs_defaults;" \
 427                 "mtdparts default;" \
 428                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 429                 "setenv bootdtb ${project_dir}/kernel/dtb;" \
 430                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 431                 "setenv bootargs ${bootargs} " \
 432                 "root=/dev/nfs ${mtdparts} " \
 433                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 434                 "ip=${ipaddr}:${serverip}:" \
 435                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 436         "net_nfs=echo Booting from network ...; " \
 437                 "run net_args; " \
 438                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 439                 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
 440                 "bootm ${kloadaddr} - ${loadaddr}\0"
 441
 442 /*
 443  * Variant 3 partition layout
 444  * chip-size = 512MiB
 445  *|         name |        size |           address area |
 446  *-------------------------------------------------------
 447  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 448  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 449  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 450  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 451  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 452  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 453  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 454  *|       rootfs | 300.000 MiB | 0x  360000..0x12f5ffff |
 455  *|      mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
 456  *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
 457  *-------------------------------------------------------
 458
 459                                         "mtdparts=omap2-nand.0:" \
 460                                         "128k(spl),"            \
 461                                         "128k(spl.backup1),"    \
 462                                         "128k(spl.backup2),"    \
 463                                         "128k(spl.backup3),"    \
 464                                         "1920k(u-boot),"        \
 465                                         "512k(u-boot.env0),"    \
 466                                         "512k(u-boot.env1),"    \
 467                                         "300m(rootfs),"         \
 468                                         "512k(mtdoops),"        \
 469                                         "-(configuration)"
 470
 471  */
 472
 473 #define CONFIG_SYS_NAND_BASE            (0x08000000)    /* physical address */
 474                                                         /* to access nand at */
 475                                                         /* CS0 */
 476 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND
 477                                                            devices */
 478 #if !defined(CONFIG_SPI_BOOT)
 479 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
 480 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 481 #endif
 482 #endif
 483
 484 /* Reboot after 60 sec if bootcmd fails */
 485 #define CONFIG_RESET_TO_RETRY
 486 #define CONFIG_BOOT_RETRY_TIME 60
 487
 488 #endif  /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */