2 * siemens am33x common board options
3 * (C) Copyright 2013 Siemens Schweiz AG
4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
7 * U-Boot file:/include/configs/am335x_evm.h
9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
11 * SPDX-License-Identifier: GPL-2.0+
14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
15 #define __CONFIG_SIEMENS_AM33X_COMMON_H
20 #include <asm/arch/omap.h>
22 #define CONFIG_DMA_COHERENT
23 #define CONFIG_DMA_COHERENT_SIZE (1 << 20)
25 #define CONFIG_ENV_SIZE (0x2000)
26 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
27 #define CONFIG_SYS_LONGHELP /* undef to save memory */
28 #define CONFIG_BOARD_LATE_INIT
29 #define CONFIG_SYS_NO_FLASH
30 #ifdef CONFIG_SIEMENS_MACH_TYPE
31 #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE
34 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
35 #define CONFIG_SETUP_MEMORY_TAGS
36 #define CONFIG_INITRD_TAG
38 /* commands to include */
40 #define CONFIG_ENV_VARS_UBOOT_CONFIG
41 #ifndef CONFIG_SPL_BUILD
42 #define CONFIG_ROOTPATH "/opt/eldk"
45 #define CONFIG_ENV_OVERWRITE 1
46 #define CONFIG_ENV_IS_NOWHERE
48 #define CONFIG_SYS_LONGHELP
49 #define CONFIG_CMDLINE_EDITING
50 #define CONFIG_AUTO_COMPLETE
51 #define CONFIG_SYS_AUTOLOAD "yes"
54 #define V_OSCK 24000000 /* Clock output from T2 */
55 #define V_SCLK (V_OSCK)
57 /* We set the max number of command args high to avoid HUSH bugs. */
58 #define CONFIG_SYS_MAXARGS 32
60 /* Console I/O Buffer Size */
61 #define CONFIG_SYS_CBSIZE 1024
63 /* Print Buffer Size */
64 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
65 + sizeof(CONFIG_SYS_PROMPT) + 16)
67 /* Boot Argument Buffer Size */
68 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
71 * memtest works on 8 MB in DRAM after skipping 32MB from
72 * start addr of ram disk
74 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024))
75 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
78 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
80 #define CONFIG_GENERIC_MMC
81 #define CONFIG_OMAP_HSMMC
82 #define CONFIG_DOS_PARTITION
85 #define CONFIG_OMAP3_SPI
86 #define CONFIG_MTD_DEVICE
87 #define CONFIG_SF_DEFAULT_SPEED (75000000)
89 /* Physical Memory Map */
90 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
91 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
93 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
94 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
95 GENERATED_GBL_DATA_SIZE)
96 /* Platform/Board specific defs */
97 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
98 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
100 /* NS16550 Configuration */
101 #ifdef CONFIG_SPL_BUILD
102 #define CONFIG_SYS_NS16550_SERIAL
103 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
105 #define CONFIG_SYS_NS16550_CLK (48000000)
106 #define CONFIG_SYS_NS16550_COM1 0x44e09000
107 #define CONFIG_SYS_NS16550_COM4 0x481a6000
109 #define CONFIG_BAUDRATE 115200
111 #define CONFIG_SERIAL1 1
112 #define CONFIG_CONS_INDEX 1
114 /* I2C Configuration */
116 #define CONFIG_SYS_I2C
117 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000
118 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
119 #define CONFIG_SYS_I2C_OMAP24XX
121 /* Defines for SPL */
122 #define CONFIG_SPL_FRAMEWORK
123 #define CONFIG_SPL_TEXT_BASE 0x402F0400
124 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
125 CONFIG_SPL_TEXT_BASE)
127 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
128 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
130 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
131 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
132 #define CONFIG_FS_FAT
134 #define CONFIG_SPL_SPI_LOAD
135 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
137 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
139 #define CONFIG_SPL_BOARD_INIT
140 #define CONFIG_SPL_NAND_AM33XX_BCH
141 #define CONFIG_SPL_NAND_BASE
142 #define CONFIG_SPL_NAND_DRIVERS
143 #define CONFIG_SPL_NAND_ECC
144 #define CONFIG_SYS_NAND_ONFI_DETECTION
145 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
146 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
147 CONFIG_SYS_NAND_PAGE_SIZE)
148 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
149 #define CONFIG_SYS_NAND_OOBSIZE 64
150 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
151 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
152 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
153 10, 11, 12, 13, 14, 15, 16, 17, \
154 18, 19, 20, 21, 22, 23, 24, 25, \
155 26, 27, 28, 29, 30, 31, 32, 33, \
156 34, 35, 36, 37, 38, 39, 40, 41, \
157 42, 43, 44, 45, 46, 47, 48, 49, \
158 50, 51, 52, 53, 54, 55, 56, 57, }
160 #define CONFIG_SYS_NAND_ECCSIZE 512
161 #define CONFIG_SYS_NAND_ECCBYTES 14
162 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
164 #define CONFIG_SYS_NAND_ECCSTEPS 4
165 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
166 CONFIG_SYS_NAND_ECCSTEPS)
168 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
170 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
173 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
174 * 64 bytes before this address should be set aside for u-boot.img's
175 * header. That is 0x800FFFC0--0x80100000 should not be used for any
178 #define CONFIG_SYS_TEXT_BASE 0x80100000
179 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
180 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
183 * Since SPL did pll and ddr initialization for us,
184 * we don't need to do it twice.
186 #ifndef CONFIG_SPL_BUILD
187 #define CONFIG_SKIP_LOWLEVEL_INIT
190 #ifndef CONFIG_SPL_BUILD
194 #define CONFIG_USB_MUSB_DSPS
195 #define CONFIG_ARCH_MISC_INIT
196 #define CONFIG_USB_MUSB_PIO_ONLY
197 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
198 #undef CONFIG_USB_GADGET_DUALSPEED
200 #define CONFIG_AM335X_USB0
201 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
202 #define CONFIG_AM335X_USB1
203 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
205 #ifdef CONFIG_USB_MUSB_GADGET
206 #define CONFIG_USB_ETHER
207 #define CONFIG_USB_ETH_RNDIS
208 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
209 #endif /* CONFIG_USB_MUSB_GADGET */
211 /* USB DRACO ID as default */
212 #define CONFIG_USBD_HS
214 /* USB Device Firmware Update support */
215 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20)
216 #define DFU_MANIFEST_POLL_TIMEOUT 25000
218 #endif /* CONFIG_SPL_BUILD */
221 * Default to using SPI for environment, etc. We have multiple copies
222 * of SPL as the ROM will check these locations.
223 * 0x0 - 0x20000 : First copy of SPL
224 * 0x20000 - 0x40000 : Second copy of SPL
225 * 0x40000 - 0x60000 : Third copy of SPL
226 * 0x60000 - 0x80000 : Fourth copy of SPL
227 * 0x80000 - 0xDF000 : U-Boot
228 * 0xDF000 - 0xE0000 : U-Boot Environment
229 * 0xE0000 - 0x442000 : Linux Kernel
230 * 0x442000 - 0x800000 : Userland
232 #if defined(CONFIG_SPI_BOOT)
233 # undef CONFIG_ENV_IS_NOWHERE
234 # define CONFIG_ENV_IS_IN_SPI_FLASH
235 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
236 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */
237 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
238 #endif /* SPI support */
240 /* Unsupported features */
241 #undef CONFIG_USE_IRQ
243 #define CONFIG_DRIVER_TI_CPSW
245 #define CONFIG_PHY_GIGE
246 #define CONFIG_PHYLIB
247 #define CONFIG_BOOTP_DEFAULT
248 #define CONFIG_BOOTP_DNS
249 #define CONFIG_BOOTP_DNS2
250 #define CONFIG_BOOTP_SEND_HOSTNAME
251 #define CONFIG_BOOTP_GATEWAY
252 #define CONFIG_BOOTP_SUBNETMASK
253 #define CONFIG_NET_RETRY_COUNT 10
258 #define CONFIG_CMD_NAND
261 #ifndef CONFIG_SPL_BUILD
262 #define CONFIG_CMD_MTDPARTS
263 #define CONFIG_MTD_PARTITIONS
264 #define CONFIG_MTD_DEVICE
265 #define CONFIG_RBTREE
267 #define CONFIG_CMD_UBIFS
270 /* Commen environment */
271 #define CONFIG_PREBOOT
272 #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
273 "setenv bootargs ${bootargs};" \
274 "mtdparts default;" \
279 #define COMMON_ENV_NAND_BOOT \
280 "nand_boot=echo Booting from nand; " \
281 "if test ${upgrade_available} -eq 1; then " \
282 "if test ${bootcount} -gt ${bootlimit}; " \
284 "setenv upgrade_available 0;" \
285 "setenv ${partitionset_active} true;" \
286 "if test -n ${A}; then " \
287 "setenv partitionset_active B; " \
290 "if test -n ${B}; then " \
291 "setenv partitionset_active A; " \
297 "echo set ${partitionset_active}...;" \
300 #define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \
301 "flash_self_test=setenv testargs test; " \
303 "dfu_start=echo Preparing for dfu mode ...; " \
306 #define COMMON_ENV_SETTINGS \
308 "project_dir=targetdir\0" \
309 "upgrade_available=0\0" \
310 "altbootcmd=run bootcmd\0" \
312 "partitionset_active=A\0" \
313 "loadaddr=0x82000000\0" \
314 "kloadaddr=0x81000000\0" \
315 "script_addr=0x81900000\0" \
316 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
317 "nfsopts=nolock rw\0" \
319 "bootenv=uEnv.txt\0" \
320 "bootargs_defaults=setenv bootargs " \
321 "console=${console} " \
324 "siemens_help=echo; "\
325 "echo Type 'run flash_self' to use kernel and root " \
326 "filesystem on memory; echo Type 'run flash_self_test' to " \
327 "use kernel and root filesystem on memory, boot in test " \
328 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
329 "from memory and root filesystem over NFS; echo Type " \
330 "'run net_nfs' to get Kernel over TFTP and mount root " \
331 "filesystem over NFS; " \
332 "echo Set partitionset_active variable to 'A' " \
333 "or 'B' to select kernel and rootfs partition; " \
338 * Variant 1 partition layout
340 *| name | size | address area |
341 *-------------------------------------------------------
342 *| spl | 128.000 KiB | 0x 0..0x 1ffff |
343 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff |
344 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff |
345 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff |
346 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
347 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff |
348 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff |
349 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff |
350 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff |
351 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
352 *-------------------------------------------------------
354 #define MTDIDS_NAME_STR "omap2-nand.0"
355 #define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR
356 #define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \
358 "128k(spl.backup1)," \
359 "128k(spl.backup2)," \
360 "128k(spl.backup3)," \
368 #define DFU_ALT_INFO_NAND_V1 \
370 "spl.backup1 part 0 2;" \
371 "spl.backup2 part 0 3;" \
372 "spl.backup3 part 0 4;" \
374 "u-boot.env part 0 6;" \
375 "kernel_a part 0 7;" \
376 "kernel_b part 0 8;" \
377 "rootfs partubi 0 10"
379 #define CONFIG_ENV_SETTINGS_NAND_V1 \
380 "nand_active_ubi_vol=rootfs_a\0" \
381 "nand_active_ubi_vol_A=rootfs_a\0" \
382 "nand_active_ubi_vol_B=rootfs_b\0" \
383 "nand_root_fs_type=ubifs rootwait=1\0" \
384 "nand_src_addr=0x280000\0" \
385 "nand_src_addr_A=0x280000\0" \
386 "nand_src_addr_B=0x780000\0" \
387 "nand_args=run bootargs_defaults;" \
388 "mtdparts default;" \
389 "setenv ${partitionset_active} true;" \
390 "if test -n ${A}; then " \
391 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
392 "setenv nand_src_addr ${nand_src_addr_A};" \
394 "if test -n ${B}; then " \
395 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
396 "setenv nand_src_addr ${nand_src_addr_B};" \
398 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
399 "ubi.mtd=9,${ubi_off};" \
400 "setenv bootargs ${bootargs} " \
401 "root=${nand_root} noinitrd ${mtdparts} " \
402 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
403 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
405 COMMON_ENV_DFU_ARGS \
406 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
407 COMMON_ENV_NAND_BOOT \
408 "nand read.i ${kloadaddr} ${nand_src_addr} " \
409 "${nand_img_size}; bootm ${kloadaddr}\0" \
412 #define CONFIG_ENV_SETTINGS_V1 \
413 COMMON_ENV_SETTINGS \
414 "net_args=run bootargs_defaults;" \
415 "mtdparts default;" \
416 "setenv bootfile ${project_dir}/kernel/uImage;" \
417 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
418 "setenv bootargs ${bootargs} " \
419 "root=/dev/nfs ${mtdparts} " \
420 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
421 "ip=${ipaddr}:${serverip}:" \
422 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
423 "net_nfs=echo Booting from network ...; " \
425 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
426 "bootm ${kloadaddr}\0"
429 * Variant 2 partition layout
430 * chip-size = 256MiB or 512 MiB
431 *| name | size | address area |
432 *-------------------------------------------------------
433 *| spl | 128.000 KiB | 0x 0..0x 1ffff |
434 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff |
435 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff |
436 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff |
437 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
438 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
439 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
440 *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff |
441 *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff |
442 *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff |
443 *-------------------------------------------------------
446 #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
448 "128k(spl.backup1)," \
449 "128k(spl.backup2)," \
450 "128k(spl.backup3)," \
452 "512k(u-boot.env0)," \
453 "512k(u-boot.env1)," \
457 #define DFU_ALT_INFO_NAND_V2 \
459 "spl.backup1 part 0 2;" \
460 "spl.backup2 part 0 3;" \
461 "spl.backup3 part 0 4;" \
463 "u-boot.env0 part 0 6;" \
464 "u-boot.env1 part 0 7;" \
465 "rootfs partubi 0 9" \
467 #define CONFIG_ENV_SETTINGS_NAND_V2 \
468 "nand_active_ubi_vol=rootfs_a\0" \
469 "rootfs_name=rootfs\0" \
470 "kernel_name=uImage\0"\
471 "nand_root_fs_type=ubifs rootwait=1\0" \
472 "nand_args=run bootargs_defaults;" \
473 "mtdparts default;" \
474 "setenv ${partitionset_active} true;" \
475 "if test -n ${A}; then " \
476 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
478 "if test -n ${B}; then " \
479 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
481 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
482 "ubi.mtd=rootfs,2048;" \
483 "setenv bootargs ${bootargs} " \
484 "root=${nand_root} noinitrd ${mtdparts} " \
485 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
486 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
488 COMMON_ENV_DFU_ARGS \
489 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
490 COMMON_ENV_NAND_BOOT \
491 "ubi part rootfs ${ubi_off};" \
492 "ubifsmount ubi0:${nand_active_ubi_vol};" \
493 "ubifsload ${kloadaddr} boot/${kernel_name};" \
494 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
495 "bootm ${kloadaddr} - ${loadaddr}\0" \
496 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
497 "bootm ${kloadaddr} - ${loadaddr}\0" \
500 #define CONFIG_ENV_SETTINGS_V2 \
501 COMMON_ENV_SETTINGS \
502 "net_args=run bootargs_defaults;" \
503 "mtdparts default;" \
504 "setenv bootfile ${project_dir}/kernel/uImage;" \
505 "setenv bootdtb ${project_dir}/kernel/dtb;" \
506 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
507 "setenv bootargs ${bootargs} " \
508 "root=/dev/nfs ${mtdparts} " \
509 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
510 "ip=${ipaddr}:${serverip}:" \
511 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
512 "net_nfs=echo Booting from network ...; " \
514 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
515 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
516 "bootm ${kloadaddr} - ${loadaddr}\0"
519 * Variant 3 partition layout
521 *| name | size | address area |
522 *-------------------------------------------------------
523 *| spl | 128.000 KiB | 0x 0..0x 1ffff |
524 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff |
525 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff |
526 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff |
527 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
528 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
529 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
530 *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff |
531 *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
532 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
533 *-------------------------------------------------------
536 #define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \
538 "128k(spl.backup1)," \
539 "128k(spl.backup2)," \
540 "128k(spl.backup3)," \
542 "512k(u-boot.env0)," \
543 "512k(u-boot.env1)," \
548 #define CONFIG_NAND_OMAP_GPMC
549 #define CONFIG_NAND_OMAP_ELM
550 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */
551 /* to access nand at */
553 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND
555 #if !defined(CONFIG_SPI_BOOT)
556 #undef CONFIG_ENV_IS_NOWHERE
557 #define CONFIG_ENV_IS_IN_NAND
558 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
559 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
563 #define CONFIG_OMAP_GPIO
565 /* Gpio cmd support */
568 #define CONFIG_HW_WATCHDOG
570 /* Reboot after 60 sec if bootcmd fails */
571 #define CONFIG_RESET_TO_RETRY
572 #define CONFIG_BOOT_RETRY_TIME 60
574 #define CONFIG_BOOTCOUNT_LIMIT
575 #define CONFIG_BOOTCOUNT_ENV
577 #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */