2 * (C) Copyright 2009-2014
3 * Gerald Kerma <dreagle@doukki.net>
4 * Marvell Semiconductor <www.marvell.com>
5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
7 * SPDX-License-Identifier: GPL-2.0+
10 #ifndef _CONFIG_SHEEVAPLUG_H
11 #define _CONFIG_SHEEVAPLUG_H
15 * Version number information
17 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug"
20 * High Level Configuration Options (easy to change)
22 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
23 #define CONFIG_KW88F6281 1 /* SOC Name */
24 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */
25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
27 /* Add target to build it automatically upon "make" */
28 #define CONFIG_BUILD_TARGET "u-boot.kwb"
31 * Compression configuration
38 * Enable device tree support
40 #define CONFIG_OF_LIBFDT
43 * Miscellaneous configurable options
45 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
48 * Commands configuration
50 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
51 #define CONFIG_CMD_BOOTZ
52 #define CONFIG_CMD_DATE
53 #define CONFIG_CMD_DHCP
54 #define CONFIG_CMD_ENV
55 #define CONFIG_CMD_IDE
56 #define CONFIG_CMD_MII
57 #define CONFIG_CMD_MMC
58 #define CONFIG_CMD_NAND
59 #define CONFIG_CMD_PING
60 #define CONFIG_CMD_USB
63 * mv-common.h should be defined after CMD configs since it used them
64 * to enable certain macros
66 #include "mv-common.h"
69 * Environment variables configurations
71 #ifdef CONFIG_CMD_NAND
72 #define CONFIG_ENV_IS_IN_NAND 1
73 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
75 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
78 * max 4k env size is enough, but in case of nand
79 * it has to be rounded to sector size
81 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
82 #define CONFIG_ENV_ADDR 0x80000
83 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
86 * Default environment variables
88 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
89 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
90 "${x_bootcmd_usb}; bootm 0x6400000;"
92 #define CONFIG_MTDPARTS \
93 "mtdparts=orion_nand:512K(uboot)," \
94 "512K(env),1M(script),6M(kernel)," \
95 "12M(ramdisk),4M(spare),-(rootfs)"
97 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
98 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
99 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
100 "x_bootcmd_usb=usb start\0" \
101 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
103 #define MTDIDS_DEFAULT "nand0=orion_nand"
105 #define MTDPARTS_DEFAULT \
106 "mtdparts="CONFIG_MTDPARTS
109 * Ethernet Driver configuration
111 #ifdef CONFIG_CMD_NET
112 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
113 #define CONFIG_PHY_BASE_ADR 0
114 #endif /* CONFIG_CMD_NET */
117 * SDIO/MMC Card Configuration
119 #ifdef CONFIG_CMD_MMC
121 #define CONFIG_GENERIC_MMC
122 #define CONFIG_MVEBU_MMC
123 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
124 #endif /* CONFIG_CMD_MMC */
127 * SATA driver configuration
129 #ifdef CONFIG_CMD_IDE
131 #define CONFIG_IDE_PREINIT
132 #define CONFIG_DOS_PARTITION
133 #define CONFIG_MVSATA_IDE_USE_PORT0
134 #define CONFIG_MVSATA_IDE_USE_PORT1
135 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
136 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
137 #endif /* CONFIG_CMD_IDE */
140 * RTC driver configuration
142 #ifdef CONFIG_CMD_DATE
143 #define CONFIG_RTC_MV
144 #endif /* CONFIG_CMD_DATE */
149 #define CONFIG_CMD_EXT2
150 #define CONFIG_CMD_EXT4
151 #define CONFIG_CMD_FAT
152 #define CONFIG_CMD_JFFS2
153 #define CONFIG_CMD_UBI
154 #define CONFIG_CMD_UBIFS
155 #define CONFIG_RBTREE
156 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
157 #define CONFIG_MTD_PARTITIONS
158 #define CONFIG_CMD_MTDPARTS
160 #define CONFIG_SYS_ALT_MEMTEST
162 #endif /* _CONFIG_SHEEVAPLUG_H */