2 * (C) Copyright 2009-2014
3 * Gerald Kerma <dreagle@doukki.net>
4 * Marvell Semiconductor <www.marvell.com>
5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
7 * SPDX-License-Identifier: GPL-2.0+
10 #ifndef _CONFIG_SHEEVAPLUG_H
11 #define _CONFIG_SHEEVAPLUG_H
13 #define CONFIG_SYS_GENERIC_BOARD
16 * Version number information
18 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug"
21 * High Level Configuration Options (easy to change)
23 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
24 #define CONFIG_KW88F6281 1 /* SOC Name */
25 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */
26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
29 * Compression configuration
36 * Miscellaneous configurable options
38 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
41 * Commands configuration
43 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
44 #include <config_cmd_default.h>
45 #define CONFIG_CMD_BOOTZ
46 #define CONFIG_CMD_DHCP
47 #define CONFIG_CMD_ENV
48 #define CONFIG_CMD_IDE
49 #define CONFIG_CMD_MII
50 #define CONFIG_CMD_MMC
51 #define CONFIG_CMD_NAND
52 #define CONFIG_CMD_PING
53 #define CONFIG_CMD_USB
55 * mv-common.h should be defined after CMD configs since it used them
56 * to enable certain macros
58 #include "mv-common.h"
61 * Environment variables configurations
63 #ifdef CONFIG_CMD_NAND
64 #define CONFIG_ENV_IS_IN_NAND 1
65 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
67 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
70 * max 4k env size is enough, but in case of nand
71 * it has to be rounded to sector size
73 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
74 #define CONFIG_ENV_ADDR 0x80000
75 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
78 * Default environment variables
80 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
81 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
82 "${x_bootcmd_usb}; bootm 0x6400000;"
84 #define CONFIG_MTDPARTS \
85 "mtdparts=orion_nand:512K(uboot)," \
86 "512K(env),1M(script),6M(kernel)," \
87 "12M(ramdisk),4M(spare),-(rootfs)"
89 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
90 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
91 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
92 "x_bootcmd_usb=usb start\0" \
93 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
95 #define MTDIDS_DEFAULT "nand0=orion_nand"
97 #define MTDPARTS_DEFAULT \
98 "mtdparts="CONFIG_MTDPARTS
101 * Ethernet Driver configuration
103 #ifdef CONFIG_CMD_NET
104 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
105 #define CONFIG_PHY_BASE_ADR 0
106 #endif /* CONFIG_CMD_NET */
109 * SDIO/MMC Card Configuration
111 #ifdef CONFIG_CMD_MMC
113 #define CONFIG_GENERIC_MMC
114 #define CONFIG_MVEBU_MMC
115 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
116 #endif /* CONFIG_CMD_MMC */
119 * SATA driver configuration
121 #ifdef CONFIG_CMD_IDE
123 #define CONFIG_IDE_PREINIT
124 #define CONFIG_DOS_PARTITION
125 #define CONFIG_MVSATA_IDE_USE_PORT0
126 #define CONFIG_MVSATA_IDE_USE_PORT1
127 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
128 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
129 #endif /* CONFIG_CMD_IDE */
134 #define CONFIG_CMD_EXT2
135 #define CONFIG_CMD_EXT4
136 #define CONFIG_CMD_FAT
137 #define CONFIG_CMD_JFFS2
138 #define CONFIG_CMD_UBI
139 #define CONFIG_CMD_UBIFS
140 #define CONFIG_RBTREE
141 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
142 #define CONFIG_MTD_PARTITIONS
143 #define CONFIG_CMD_MTDPARTS
146 #endif /* _CONFIG_SHEEVAPLUG_H */