2 * WindRiver SBC8349 U-Boot configuration file.
3 * Copyright (c) 2006, 2007 Wind River Systems, Inc.
5 * Paul Gortmaker <paul.gortmaker@windriver.com>
6 * Based on the MPC8349EMDS config.
8 * See file CREDITS for list of people who contributed to this
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28 * sbc8349 board configuration file.
35 * High Level Configuration Options
37 #define CONFIG_E300 1 /* E300 Family */
38 #define CONFIG_MPC83xx 1 /* MPC83xx family */
39 #define CONFIG_MPC834x 1 /* MPC834x family */
40 #define CONFIG_MPC8349 1 /* MPC8349 specific */
41 #define CONFIG_SBC8349 1 /* WRS SBC8349 board specific */
43 /* Don't enable PCI2 on sbc834x - it doesn't exist physically. */
44 #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */
47 * The default if PCI isn't enabled, or if no PCI clk setting is given
48 * is 66MHz; this is what the board defaults to when the PCI slot is
49 * physically empty. The board will automatically (i.e w/o jumpers)
50 * clock down to 33MHz if you insert a 33MHz PCI card.
53 #define CONFIG_83XX_CLKIN 33000000 /* in Hz */
55 #define CONFIG_83XX_CLKIN 66000000 /* in Hz */
58 #ifndef CONFIG_SYS_CLK_FREQ
60 #define CONFIG_SYS_CLK_FREQ 33000000
61 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1
63 #define CONFIG_SYS_CLK_FREQ 66000000
64 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1
68 #undef CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
70 #define CONFIG_SYS_IMMR 0xE0000000
72 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
73 #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */
74 #define CONFIG_SYS_MEMTEST_END 0x00100000
79 #undef CONFIG_DDR_ECC /* only for ECC DDR module */
80 #undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */
81 #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
82 #define CONFIG_SYS_83XX_DDR_USES_CS0 /* WRS; Fsl board uses CS2/CS3 */
85 * 32-bit data path mode.
87 * Please note that using this mode for devices with the real density of 64-bit
88 * effectively reduces the amount of available memory due to the effect of
89 * wrapping around while translating address to row/columns, for example in the
90 * 256MB module the upper 128MB get aliased with contents of the lower
91 * 128MB); normally this define should be used for devices with real 32-bit
94 #undef CONFIG_DDR_32BIT
96 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/
97 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
98 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
99 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
100 DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
101 #define CONFIG_DDR_2T_TIMING
103 #if defined(CONFIG_SPD_EEPROM)
105 * Determine DDR configuration from I2C interface.
107 #define SPD_EEPROM_ADDRESS 0x52 /* DDR DIMM */
111 * Manually set up DDR parameters
112 * NB: manual DDR setup untested on sbc834x
114 #define CONFIG_SYS_DDR_SIZE 256 /* MB */
115 #define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
116 #define CONFIG_SYS_DDR_TIMING_1 0x36332321
117 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
118 #define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
119 #define CONFIG_SYS_DDR_INTERVAL 0x04060100 /* autocharge,no open page */
121 #if defined(CONFIG_DDR_32BIT)
122 /* set burst length to 8 for 32-bit data path */
123 #define CONFIG_SYS_DDR_MODE 0x00000023 /* DLL,normal,seq,4/2.5, 8 burst len */
125 /* the default burst length is 4 - for 64-bit data path */
126 #define CONFIG_SYS_DDR_MODE 0x00000022 /* DLL,normal,seq,4/2.5, 4 burst len */
131 * SDRAM on the Local Bus
133 #define CONFIG_SYS_LBC_SDRAM_BASE 0x10000000 /* Localbus SDRAM */
134 #define CONFIG_SYS_LBC_SDRAM_SIZE 128 /* LBC SDRAM is 128MB */
137 * FLASH on the Local Bus
139 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
140 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
141 #define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */
142 #define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */
143 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
145 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | /* flash Base address */ \
146 (2 << BR_PS_SHIFT) | /* 32 bit port size */ \
149 #define CONFIG_SYS_OR0_PRELIM 0xFF806FF7 /* 8 MB flash size */
150 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* window base at flash base */
151 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */
153 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
154 #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */
156 #undef CONFIG_SYS_FLASH_CHECKSUM
157 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
158 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
160 #define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
161 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
163 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
164 #define CONFIG_SYS_RAMBOOT
166 #undef CONFIG_SYS_RAMBOOT
169 #define CONFIG_SYS_INIT_RAM_LOCK 1
170 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
171 #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/
173 #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
174 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
175 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
177 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
178 #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
181 * Local Bus LCRR and LBCR regs
182 * LCRR: DLL bypass, Clock divider is 4
183 * External Local Bus rate is
184 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
186 #define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
187 #define CONFIG_SYS_LBC_LBCR 0x00000000
189 #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */
191 #ifdef CONFIG_SYS_LB_SDRAM
192 /* Local bus BR2, OR2 definition for SDRAM if soldered on the board*/
194 * Base Register 2 and Option Register 2 configure SDRAM.
195 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
198 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
199 * port-size = 32-bits = BR2[19:20] = 11
200 * no parity checking = BR2[21:22] = 00
201 * SDRAM for MSEL = BR2[24:26] = 011
204 * 0 4 8 12 16 20 24 28
205 * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
207 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
208 * FIXME: the top 17 bits of BR2.
211 #define CONFIG_SYS_BR2_PRELIM 0xF0001861 /* Port-size=32bit, MSEL=SDRAM */
212 #define CONFIG_SYS_LBLAWBAR2_PRELIM 0xF0000000
213 #define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000019 /* 64M */
216 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
219 * 64MB mask for AM, OR2[0:7] = 1111 1100
220 * XAM, OR2[17:18] = 11
221 * 9 columns OR2[19-21] = 010
222 * 13 rows OR2[23-25] = 100
223 * EAD set for extra time OR[31] = 1
225 * 0 4 8 12 16 20 24 28
226 * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
229 #define CONFIG_SYS_OR2_PRELIM 0xFC006901
231 #define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
232 #define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */
234 #define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFEN \
245 * SDRAM Controller configuration sequence.
247 #define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
248 #define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
249 #define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
250 #define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
251 #define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
257 #define CONFIG_CONS_INDEX 1
258 #undef CONFIG_SERIAL_SOFTWARE_FIFO
259 #define CONFIG_SYS_NS16550
260 #define CONFIG_SYS_NS16550_SERIAL
261 #define CONFIG_SYS_NS16550_REG_SIZE 1
262 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
264 #define CONFIG_SYS_BAUDRATE_TABLE \
265 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
267 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
268 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
270 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */
271 /* Use the HUSH parser */
272 #define CONFIG_SYS_HUSH_PARSER
273 #ifdef CONFIG_SYS_HUSH_PARSER
274 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
277 /* pass open firmware flat tree */
278 #define CONFIG_OF_LIBFDT 1
279 #define CONFIG_OF_BOARD_SETUP 1
280 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
283 #define CONFIG_HARD_I2C /* I2C with hardware support*/
284 #undef CONFIG_SOFT_I2C /* I2C bit-banged */
285 #define CONFIG_FSL_I2C
286 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
287 #define CONFIG_SYS_I2C_SLAVE 0x7F
288 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
289 #define CONFIG_SYS_I2C1_OFFSET 0x3000
290 #define CONFIG_SYS_I2C2_OFFSET 0x3100
291 #define CONFIG_SYS_I2C_OFFSET CONFIG_SYS_I2C2_OFFSET
292 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SPD_BUS_NUM... */
295 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
296 #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
297 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
298 #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
302 * Addresses are mapped 1-1.
304 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
305 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
306 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
307 #define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
308 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
309 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
310 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
311 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
312 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
314 #define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000
315 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
316 #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
317 #define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000
318 #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE
319 #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */
320 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000
321 #define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000
322 #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */
324 #if defined(CONFIG_PCI)
328 #if defined(PCI_64BIT)
334 #define CONFIG_NET_MULTI
335 #define CONFIG_PCI_PNP /* do pci plug-and-play */
337 #undef CONFIG_EEPRO100
340 #if !defined(CONFIG_PCI_PNP)
341 #define PCI_ENET0_IOADDR 0xFIXME
342 #define PCI_ENET0_MEMADDR 0xFIXME
343 #define PCI_IDSEL_NUMBER 0xFIXME
346 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
347 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
349 #endif /* CONFIG_PCI */
354 #define CONFIG_TSEC_ENET /* TSEC ethernet support */
356 #if defined(CONFIG_TSEC_ENET)
357 #ifndef CONFIG_NET_MULTI
358 #define CONFIG_NET_MULTI 1
361 #define CONFIG_TSEC1 1
362 #define CONFIG_TSEC1_NAME "TSEC0"
363 #define CONFIG_TSEC2 1
364 #define CONFIG_TSEC2_NAME "TSEC1"
365 #define CONFIG_PHY_BCM5421S 1
366 #define TSEC1_PHY_ADDR 0x19
367 #define TSEC2_PHY_ADDR 0x1a
368 #define TSEC1_PHYIDX 0
369 #define TSEC2_PHYIDX 0
370 #define TSEC1_FLAGS TSEC_GIGABIT
371 #define TSEC2_FLAGS TSEC_GIGABIT
373 /* Options are: TSEC[0-1] */
374 #define CONFIG_ETHPRIME "TSEC0"
376 #endif /* CONFIG_TSEC_ENET */
381 #ifndef CONFIG_SYS_RAMBOOT
382 #define CONFIG_ENV_IS_IN_FLASH 1
383 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
384 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
385 #define CONFIG_ENV_SIZE 0x2000
387 /* Address and size of Redundant Environment Sector */
388 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
389 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
392 #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
393 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
394 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
395 #define CONFIG_ENV_SIZE 0x2000
398 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
399 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
405 #define CONFIG_BOOTP_BOOTFILESIZE
406 #define CONFIG_BOOTP_BOOTPATH
407 #define CONFIG_BOOTP_GATEWAY
408 #define CONFIG_BOOTP_HOSTNAME
412 * Command line configuration.
414 #include <config_cmd_default.h>
416 #define CONFIG_CMD_I2C
417 #define CONFIG_CMD_MII
418 #define CONFIG_CMD_PING
420 #if defined(CONFIG_PCI)
421 #define CONFIG_CMD_PCI
424 #if defined(CONFIG_SYS_RAMBOOT)
425 #undef CONFIG_CMD_SAVEENV
426 #undef CONFIG_CMD_LOADS
430 #undef CONFIG_WATCHDOG /* watchdog disabled */
433 * Miscellaneous configurable options
435 #define CONFIG_SYS_LONGHELP /* undef to save memory */
436 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
437 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
439 #if defined(CONFIG_CMD_KGDB)
440 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
442 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
445 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
446 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
447 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
448 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
451 * For booting Linux, the board info and command line data
452 * have to be in the first 8 MB of memory, since this is
453 * the maximum mapped by the Linux kernel during initialization.
455 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
457 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */
460 #define CONFIG_SYS_HRCW_LOW (\
461 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
462 HRCWL_DDR_TO_SCB_CLK_1X1 |\
463 HRCWL_CSB_TO_CLKIN |\
465 HRCWL_CORE_TO_CSB_2X1)
467 #define CONFIG_SYS_HRCW_LOW (\
468 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
469 HRCWL_DDR_TO_SCB_CLK_1X1 |\
470 HRCWL_CSB_TO_CLKIN |\
472 HRCWL_CORE_TO_CSB_3X1)
474 #define CONFIG_SYS_HRCW_LOW (\
475 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
476 HRCWL_DDR_TO_SCB_CLK_1X1 |\
477 HRCWL_CSB_TO_CLKIN |\
479 HRCWL_CORE_TO_CSB_2X1)
481 #define CONFIG_SYS_HRCW_LOW (\
482 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
483 HRCWL_DDR_TO_SCB_CLK_1X1 |\
484 HRCWL_CSB_TO_CLKIN |\
486 HRCWL_CORE_TO_CSB_1X1)
488 #define CONFIG_SYS_HRCW_LOW (\
489 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
490 HRCWL_DDR_TO_SCB_CLK_1X1 |\
491 HRCWL_CSB_TO_CLKIN |\
493 HRCWL_CORE_TO_CSB_1X1)
496 #if defined(PCI_64BIT)
497 #define CONFIG_SYS_HRCW_HIGH (\
500 HRCWH_PCI1_ARBITER_ENABLE |\
501 HRCWH_PCI2_ARBITER_DISABLE |\
503 HRCWH_FROM_0X00000100 |\
504 HRCWH_BOOTSEQ_DISABLE |\
505 HRCWH_SW_WATCHDOG_DISABLE |\
506 HRCWH_ROM_LOC_LOCAL_16BIT |\
507 HRCWH_TSEC1M_IN_GMII |\
508 HRCWH_TSEC2M_IN_GMII )
510 #define CONFIG_SYS_HRCW_HIGH (\
513 HRCWH_PCI1_ARBITER_ENABLE |\
514 HRCWH_PCI2_ARBITER_ENABLE |\
516 HRCWH_FROM_0X00000100 |\
517 HRCWH_BOOTSEQ_DISABLE |\
518 HRCWH_SW_WATCHDOG_DISABLE |\
519 HRCWH_ROM_LOC_LOCAL_16BIT |\
520 HRCWH_TSEC1M_IN_GMII |\
521 HRCWH_TSEC2M_IN_GMII )
524 /* System IO Config */
525 #define CONFIG_SYS_SICRH 0
526 #define CONFIG_SYS_SICRL SICRL_LDP_A
528 #define CONFIG_SYS_HID0_INIT 0x000000000
529 #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
531 /* #define CONFIG_SYS_HID0_FINAL (\
532 HID0_ENABLE_INSTRUCTION_CACHE |\
534 HID0_ENABLE_ADDRESS_BROADCAST ) */
537 #define CONFIG_SYS_HID2 HID2_HBE
539 #define CONFIG_HIGH_BATS 1 /* High BATs supported */
541 /* DDR @ 0x00000000 */
542 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
543 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
545 /* PCI @ 0x80000000 */
547 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
548 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
549 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
550 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
552 #define CONFIG_SYS_IBAT1L (0)
553 #define CONFIG_SYS_IBAT1U (0)
554 #define CONFIG_SYS_IBAT2L (0)
555 #define CONFIG_SYS_IBAT2U (0)
558 #ifdef CONFIG_MPC83XX_PCI2
559 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
560 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
561 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
562 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
564 #define CONFIG_SYS_IBAT3L (0)
565 #define CONFIG_SYS_IBAT3U (0)
566 #define CONFIG_SYS_IBAT4L (0)
567 #define CONFIG_SYS_IBAT4U (0)
570 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
571 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
572 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
574 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
575 #define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE | \
577 #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
579 #define CONFIG_SYS_IBAT7L (0)
580 #define CONFIG_SYS_IBAT7U (0)
582 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
583 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
584 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
585 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
586 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
587 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
588 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
589 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
590 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
591 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
592 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
593 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
594 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
595 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
596 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
597 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
600 * Internal Definitions
604 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
605 #define BOOTFLAG_WARM 0x02 /* Software reboot */
607 #if defined(CONFIG_CMD_KGDB)
608 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
609 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
613 * Environment Configuration
615 #define CONFIG_ENV_OVERWRITE
617 #if defined(CONFIG_TSEC_ENET)
618 #define CONFIG_HAS_ETH0
619 #define CONFIG_ETHADDR 00:a0:1e:a0:13:8d
620 #define CONFIG_HAS_ETH1
621 #define CONFIG_ETH1ADDR 00:a0:1e:a0:13:8e
624 #define CONFIG_IPADDR 192.168.1.234
626 #define CONFIG_HOSTNAME SBC8349
627 #define CONFIG_ROOTPATH /tftpboot/rootfs
628 #define CONFIG_BOOTFILE uImage
630 #define CONFIG_SERVERIP 192.168.1.1
631 #define CONFIG_GATEWAYIP 192.168.1.1
632 #define CONFIG_NETMASK 255.255.255.0
634 #define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
636 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
637 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */
639 #define CONFIG_BAUDRATE 115200
641 #define CONFIG_EXTRA_ENV_SETTINGS \
643 "hostname=sbc8349\0" \
644 "nfsargs=setenv bootargs root=/dev/nfs rw " \
645 "nfsroot=${serverip}:${rootpath}\0" \
646 "ramargs=setenv bootargs root=/dev/ram rw\0" \
647 "addip=setenv bootargs ${bootargs} " \
648 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
649 ":${hostname}:${netdev}:off panic=1\0" \
650 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
651 "flash_nfs=run nfsargs addip addtty;" \
652 "bootm ${kernel_addr}\0" \
653 "flash_self=run ramargs addip addtty;" \
654 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
655 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
657 "load=tftp 100000 /tftpboot/sbc8349/u-boot.bin\0" \
658 "update=protect off ff800000 ff83ffff; " \
659 "era ff800000 ff83ffff; cp.b 100000 ff800000 ${filesize}\0" \
660 "upd=run load update\0" \
662 "fdtfile=sbc8349.dtb\0" \
665 #define CONFIG_NFSBOOTCOMMAND \
666 "setenv bootargs root=/dev/nfs rw " \
667 "nfsroot=$serverip:$rootpath " \
668 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
669 "console=$consoledev,$baudrate $othbootargs;" \
670 "tftp $loadaddr $bootfile;" \
671 "tftp $fdtaddr $fdtfile;" \
672 "bootm $loadaddr - $fdtaddr"
674 #define CONFIG_RAMBOOTCOMMAND \
675 "setenv bootargs root=/dev/ram rw " \
676 "console=$consoledev,$baudrate $othbootargs;" \
677 "tftp $ramdiskaddr $ramdiskfile;" \
678 "tftp $loadaddr $bootfile;" \
679 "tftp $fdtaddr $fdtfile;" \
680 "bootm $loadaddr $ramdiskaddr $fdtaddr"
682 #define CONFIG_BOOTCOMMAND "run flash_self"
684 #endif /* __CONFIG_H */