include/configs/qemu-mips.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2003
   4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   5  */
   6
   7 /*
   8  * This file contains the configuration parameters for qemu-mips target.
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_QEMU_MIPS
  15
  16 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  17
  18 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  19         "addmisc=setenv bootargs ${bootargs} "                          \
  20                 "console=ttyS0,${baudrate} "                            \
  21                 "panic=1\0"                                             \
  22         "bootfile=/tftpboot/vmlinux\0"                          \
  23         "load=tftp 80500000 ${u-boot}\0"                                \
  24         ""
  25
  26 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
  27
  28 /*
  29  * BOOTP options
  30  */
  31 #define CONFIG_BOOTP_BOOTFILESIZE
  32
  33 /*
  34  * Command line configuration.
  35  */
  36
  37 #define CONFIG_DRIVER_NE2000
  38 #define CONFIG_DRIVER_NE2000_BASE       0xb4000300
  39
  40 #define CONFIG_SYS_NS16550_SERIAL
  41 #define CONFIG_SYS_NS16550_REG_SIZE     1
  42 #define CONFIG_SYS_NS16550_CLK          115200
  43 #define CONFIG_SYS_NS16550_COM1         0xb40003f8
  44
  45 #ifdef CONFIG_SYS_BIG_ENDIAN
  46 #define CONFIG_IDE_SWAP_IO
  47 #endif
  48
  49 #define CONFIG_SYS_IDE_MAXBUS           2
  50 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
  51 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
  52 #define CONFIG_SYS_ATA_DATA_OFFSET      0
  53 #define CONFIG_SYS_ATA_REG_OFFSET       0
  54 #define CONFIG_SYS_ATA_BASE_ADDR        0xb4000000
  55
  56 #define CONFIG_SYS_IDE_MAXDEVICE        4
  57
  58 /*
  59  * Miscellaneous configurable options
  60  */
  61
  62 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
  63
  64 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
  65
  66 #define CONFIG_SYS_MHZ                  132
  67
  68 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
  69
  70 /* Cached addr */
  71 #define CONFIG_SYS_SDRAM_BASE           0x80000000
  72
  73 /* default load address */
  74 #define CONFIG_SYS_LOAD_ADDR            0x81000000
  75
  76 #define CONFIG_SYS_MEMTEST_START        0x80100000
  77 #define CONFIG_SYS_MEMTEST_END          0x80800000
  78
  79 /*-----------------------------------------------------------------------
  80  * FLASH and environment organization
  81  */
  82 /* The following #defines are needed to get flash environment right */
  83 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
  84
  85 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
  86
  87 /* We boot from this flash, selected with dip switch */
  88 #define CONFIG_SYS_FLASH_BASE           0xbfc00000
  89 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  90 #define CONFIG_SYS_MAX_FLASH_SECT       128
  91 #define CONFIG_SYS_FLASH_CFI
  92 #define CONFIG_FLASH_CFI_DRIVER
  93 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  94
  95 /* Address and size of Primary Environment Sector */
  96 #define CONFIG_ENV_SIZE         0x8000
  97 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
  98
  99 #define CONFIG_ENV_OVERWRITE    1
 100
 101 #define MEM_SIZE                128
 102
 103 #endif /* __CONFIG_H */