sunxi: Add support for using MII phy-s with the GMAC nic
[oweals/u-boot.git] / include / configs / pxm2.h
1 /*
2  * siemens pxm2
3  * (C) Copyright 2013 Siemens Schweiz AG
4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * U-Boot file:/include/configs/am335x_evm.h
8  *
9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10  *
11  * SPDX-License-Identifier:     GPL-2.0+
12  */
13
14 #ifndef __CONFIG_PXM2_H
15 #define __CONFIG_PXM2_H
16
17 #define CONFIG_SIEMENS_PXM2
18 #define MACH_TYPE_PXM2                  4309
19 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_PXM2
20
21 #include "siemens-am33x-common.h"
22
23 #define CONFIG_SYS_MPUCLK       720
24 #define DDR_IOCTRL_VAL          0x18b
25 #define DDR_PLL_FREQ            266
26
27 #define BOARD_DFU_BUTTON_GPIO   59
28 #define BOARD_DFU_BUTTON_LED    117
29 #define BOARD_LCD_POWER         111
30 #define BOARD_BACK_LIGHT        112
31 #define BOARD_TOUCH_POWER       57
32
33  /* Physical Memory Map */
34 #define CONFIG_MAX_RAM_BANK_SIZE        (512 << 20)     /* 1GB */
35
36 /* I2C Configuration */
37 #define CONFIG_SYS_I2C_SPEED            400000
38 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
39
40
41 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
42
43 #undef CONFIG_SPL_NET_SUPPORT
44 #undef CONFIG_SPL_NET_VCI_STRING
45 #undef CONFIG_SPL_ETH_SUPPORT
46
47 #define CONFIG_PHY_ATHEROS
48
49 #define CONFIG_FACTORYSET
50
51 /* UBI Support */
52 #ifndef CONFIG_SPL_BUILD
53 #define CONFIG_CMD_MTDPARTS
54 #define CONFIG_MTD_PARTITIONS
55 #define CONFIG_MTD_DEVICE
56 #define CONFIG_RBTREE
57 #define CONFIG_LZO
58 #define CONFIG_CMD_UBI
59 #define CONFIG_CMD_UBIFS
60 #endif
61
62 /* Watchdog */
63 #define CONFIG_OMAP_WATCHDOG
64
65 #ifndef CONFIG_SPL_BUILD
66
67 /* Default env settings */
68 #define CONFIG_EXTRA_ENV_SETTINGS \
69         "hostname=pxm2\0" \
70         "nand_img_size=0x500000\0" \
71         "optargs=\0" \
72         "splashpos=m,m\0"       \
73         CONFIG_COMMON_ENV_SETTINGS \
74         "mmc_dev=0\0" \
75         "mmc_root=/dev/mmcblk0p2 rw\0" \
76         "mmc_root_fs_type=ext4 rootwait\0" \
77         "mmc_load_uimage=" \
78                 "mmc rescan; " \
79                 "setenv bootfile uImage;" \
80                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
81         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
82         "importbootenv=echo Importing environment from mmc ...; " \
83                 "env import -t $loadaddr $filesize\0" \
84         "mmc_args=run bootargs_defaults;" \
85                 "mtdparts default;" \
86                 "setenv bootargs ${bootargs} " \
87                 "root=${mmc_root} ${mtdparts}" \
88                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
89                 "eth=${ethaddr} " \
90                 "\0" \
91         "mmc_boot=run mmc_args; " \
92                 "run mmc_load_uimage; " \
93                 "bootm ${kloadaddr}\0" \
94         ""
95
96 #ifndef CONFIG_RESTORE_FLASH
97 /* set to negative value for no autoboot */
98 #define CONFIG_BOOTDELAY                3
99
100 #define CONFIG_BOOTCOMMAND \
101         "if dfubutton; then " \
102                 "run dfu_start; " \
103                 "reset; " \
104         "fi; " \
105         "if mmc rescan; then " \
106                 "echo SD/MMC found on device ${mmc_dev};" \
107                 "if run loadbootenv; then " \
108                         "echo Loaded environment from ${bootenv};" \
109                         "run importbootenv;" \
110                 "fi;" \
111                 "if test -n $uenvcmd; then " \
112                         "echo Running uenvcmd ...;" \
113                         "run uenvcmd;" \
114                 "fi;" \
115                 "if run mmc_load_uimage; then " \
116                         "run mmc_args;" \
117                         "bootm ${kloadaddr};" \
118                 "fi;" \
119         "fi;" \
120         "run nand_boot;" \
121         "reset;"
122
123 #else
124 #define CONFIG_BOOTDELAY                0
125
126 #define CONFIG_BOOTCOMMAND                      \
127         "setenv autoload no; "                  \
128         "dhcp; "                                \
129         "if tftp 80000000 debrick.scr; then "   \
130                 "source 80000000; "             \
131         "fi"
132 #endif
133 #endif  /* CONFIG_SPL_BUILD */
134
135 #define CONFIG_VIDEO
136 #if defined(CONFIG_VIDEO)
137 #define CONFIG_VIDEO_DA8XX
138 #define CONFIG_CFB_CONSOLE
139 #define CONFIG_VGA_AS_SINGLE_DEVICE
140 #define CONFIG_SPLASH_SCREEN
141 #define CONFIG_SPLASH_SCREEN_ALIGN
142 #define CONFIG_VIDEO_LOGO
143 #define CONFIG_VIDEO_BMP_RLE8
144 #define CONFIG_VIDEO_BMP_LOGO
145 #define CONFIG_CMD_BMP
146 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
147 #define PWM_TICKS       0x1388
148 #define PWM_DUTY        0x200
149 #define CONFIG_SYS_CONSOLE_BG_COL       0xff
150 #define CONFIG_SYS_CONSOLE_FG_COL       0x00
151 #endif
152
153 #endif  /* ! __CONFIG_PXM2_H */