include/configs/pm9263.h

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Stelian Pop <stelian.pop@leadtechdesign.com>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  * Ilko Iliev <www.ronetix.at>
   6  *
   7  * Configuation settings for the RONETIX PM9263 board.
   8  *
   9  * See file CREDITS for list of people who contributed to this
  10  * project.
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License as
  14  * published by the Free Software Foundation; either version 2 of
  15  * the License, or (at your option) any later version.
  16  *
  17  * This program is distributed in the hope that it will be useful,
  18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  20  * GNU General Public License for more details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  25  * MA 02111-1307 USA
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /* ARM asynchronous clock */
  32 #define CONFIG_DISPLAY_CPUINFO
  33 #define CONFIG_DISPLAY_BOARDINFO
  34
  35 #define MASTER_PLL_DIV          6
  36 #define MASTER_PLL_MUL          65
  37 #define MAIN_PLL_DIV            2       /* 2 or 4 */
  38 #define AT91_MAIN_CLOCK 18432000
  39
  40 #define CONFIG_SYS_HZ           1000
  41
  42 #define CONFIG_ARM926EJS        1       /* This is an ARM926EJS Core    */
  43 #define CONFIG_AT91SAM9263      1       /* It's an Atmel AT91SAM9263 SoC*/
  44 #define CONFIG_PM9263           1       /* on a Ronetix PM9263 Board    */
  45 #define CONFIG_ARCH_CPU_INIT
  46 #undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff  */
  47
  48 /* clocks */
  49 #define CONFIG_SYS_MOR_VAL                                              \
  50                 (AT91_PMC_MOSCEN |                                      \
  51                  (255 << 8))            /* Main Oscillator Start-up Time */
  52 #define CONFIG_SYS_PLLAR_VAL                                            \
  53                 (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
  54                  AT91_PMC_OUT |                                         \
  55                  AT91_PMC_PLLCOUNT |    /* PLL Counter */               \
  56                  (2 << 28) |            /* PLL Clock Frequency Range */ \
  57                  ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
  58
  59 #if (MAIN_PLL_DIV == 2)
  60 /* PCK/2 = MCK Master Clock from PLLA */
  61 #define CONFIG_SYS_MCKR1_VAL            \
  62                 (AT91_PMC_CSS_SLOW |    \
  63                  AT91_PMC_PRES_1 |      \
  64                  AT91SAM9_PMC_MDIV_2 |  \
  65                  AT91_PMC_PDIV_1)
  66 /* PCK/2 = MCK Master Clock from PLLA */
  67 #define CONFIG_SYS_MCKR2_VAL            \
  68                 (AT91_PMC_CSS_PLLA |    \
  69                  AT91_PMC_PRES_1 |      \
  70                  AT91SAM9_PMC_MDIV_2 |  \
  71                  AT91_PMC_PDIV_1)
  72 #else
  73 /* PCK/4 = MCK Master Clock from PLLA */
  74 #define CONFIG_SYS_MCKR1_VAL                    \
  75                 (AT91_PMC_CSS_SLOW |            \
  76                  AT91_PMC_PRES_1 |              \
  77                  AT91RM9200_PMC_MDIV_3 |        \
  78                  AT91_PMC_PDIV_1)
  79 /* PCK/4 = MCK Master Clock from PLLA */
  80 #define CONFIG_SYS_MCKR2_VAL                    \
  81                 (AT91_PMC_CSS_PLLA |            \
  82                  AT91_PMC_PRES_1 |              \
  83                  AT91RM9200_PMC_MDIV_3 |        \
  84                  AT91_PMC_PDIV_1)
  85 #endif
  86 /* define PDC[31:16] as DATA[31:16] */
  87 #define CONFIG_SYS_PIOD_PDR_VAL1        0xFFFF0000
  88 /* no pull-up for D[31:16] */
  89 #define CONFIG_SYS_PIOD_PPUDR_VAL       0xFFFF0000
  90 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
  91 #define CONFIG_SYS_MATRIX_EBI0CSA_VAL                                   \
  92         (AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |     \
  93          AT91_MATRIX_EBI0_CS1A_SDRAMC)
  94
  95 /* SDRAM */
  96 /* SDRAMC_MR Mode register */
  97 #define CONFIG_SYS_SDRC_MR_VAL1         0
  98 /* SDRAMC_TR - Refresh Timer register */
  99 #define CONFIG_SYS_SDRC_TR_VAL1         0x3AA
 100 /* SDRAMC_CR - Configuration register*/
 101 #define CONFIG_SYS_SDRC_CR_VAL                                                  \
 102                 (AT91_SDRAMC_NC_9 |                                             \
 103                  AT91_SDRAMC_NR_13 |                                            \
 104                  AT91_SDRAMC_NB_4 |                                             \
 105                  AT91_SDRAMC_CAS_2 |                                            \
 106                  AT91_SDRAMC_DBW_32 |                                           \
 107                  (2 <<  8) |    /* tWR -  Write Recovery Delay */               \
 108                  (7 << 12) |    /* tRC -  Row Cycle Delay */                    \
 109                  (2 << 16) |    /* tRP -  Row Precharge Delay */                \
 110                  (2 << 20) |    /* tRCD - Row to Column Delay */                \
 111                  (5 << 24) |    /* tRAS - Active to Precharge Delay */          \
 112                  (8 << 28))     /* tXSR - Exit Self Refresh to Active Delay */
 113
 114 /* Memory Device Register -> SDRAM */
 115 #define CONFIG_SYS_SDRC_MDR_VAL         AT91_SDRAMC_MD_SDRAM
 116 #define CONFIG_SYS_SDRC_MR_VAL2         AT91_SDRAMC_MODE_PRECHARGE
 117 #define CONFIG_SYS_SDRAM_VAL1           0               /* SDRAM_BASE */
 118 #define CONFIG_SYS_SDRC_MR_VAL3         AT91_SDRAMC_MODE_REFRESH
 119 #define CONFIG_SYS_SDRAM_VAL2           0               /* SDRAM_BASE */
 120 #define CONFIG_SYS_SDRAM_VAL3           0               /* SDRAM_BASE */
 121 #define CONFIG_SYS_SDRAM_VAL4           0               /* SDRAM_BASE */
 122 #define CONFIG_SYS_SDRAM_VAL5           0               /* SDRAM_BASE */
 123 #define CONFIG_SYS_SDRAM_VAL6           0               /* SDRAM_BASE */
 124 #define CONFIG_SYS_SDRAM_VAL7           0               /* SDRAM_BASE */
 125 #define CONFIG_SYS_SDRAM_VAL8           0               /* SDRAM_BASE */
 126 #define CONFIG_SYS_SDRAM_VAL9           0               /* SDRAM_BASE */
 127 #define CONFIG_SYS_SDRC_MR_VAL4         AT91_SDRAMC_MODE_LMR
 128 #define CONFIG_SYS_SDRAM_VAL10          0               /* SDRAM_BASE */
 129 #define CONFIG_SYS_SDRC_MR_VAL5         AT91_SDRAMC_MODE_NORMAL
 130 #define CONFIG_SYS_SDRAM_VAL11          0               /* SDRAM_BASE */
 131 #define CONFIG_SYS_SDRC_TR_VAL2         1200            /* SDRAM_TR */
 132 #define CONFIG_SYS_SDRAM_VAL12          0               /* SDRAM_BASE */
 133
 134 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
 135 #define CONFIG_SYS_SMC0_SETUP0_VAL                                      \
 136                 (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |   \
 137                  AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
 138 #define CONFIG_SYS_SMC0_PULSE0_VAL                                      \
 139                 (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |   \
 140                  AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
 141 #define CONFIG_SYS_SMC0_CYCLE0_VAL      \
 142                 (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
 143 #define CONFIG_SYS_SMC0_MODE0_VAL                               \
 144                 (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |       \
 145                  AT91_SMC_DBW_16 |                              \
 146                  AT91_SMC_TDFMODE |                             \
 147                  AT91_SMC_TDF_(6))
 148
 149 /* user reset enable */
 150 #define CONFIG_SYS_RSTC_RMR_VAL                 \
 151                 (AT91_RSTC_KEY |                \
 152                 AT91_RSTC_PROCRST |             \
 153                 AT91_RSTC_RSTTYP_WAKEUP |       \
 154                 AT91_RSTC_RSTTYP_WATCHDOG)
 155
 156 /* Disable Watchdog */
 157 #define CONFIG_SYS_WDTC_WDMR_VAL                                \
 158                 (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |       \
 159                  AT91_WDT_WDV |                                 \
 160                  AT91_WDT_WDDIS |                               \
 161                  AT91_WDT_WDD)
 162
 163 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs */
 164 #define CONFIG_SETUP_MEMORY_TAGS 1
 165 #define CONFIG_INITRD_TAG       1
 166
 167 #undef CONFIG_SKIP_LOWLEVEL_INIT
 168 #undef CONFIG_SKIP_RELOCATE_UBOOT
 169 #define CONFIG_USER_LOWLEVEL_INIT       1
 170
 171 /*
 172  * Hardware drivers
 173  */
 174 #define CONFIG_ATMEL_USART      1
 175 #undef CONFIG_USART0
 176 #undef CONFIG_USART1
 177 #undef CONFIG_USART2
 178 #define CONFIG_USART3           1       /* USART 3 is DBGU */
 179
 180 /* LCD */
 181 #define CONFIG_LCD                      1
 182 #define LCD_BPP                         LCD_COLOR8
 183 #define CONFIG_LCD_LOGO                 1
 184 #undef LCD_TEST_PATTERN
 185 #define CONFIG_LCD_INFO                 1
 186 #define CONFIG_LCD_INFO_BELOW_LOGO      1
 187 #define CONFIG_SYS_WHITE_ON_BLACK       1
 188 #define CONFIG_ATMEL_LCD                1
 189 #define CONFIG_ATMEL_LCD_BGR555         1
 190 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
 191
 192 #define CONFIG_LCD_IN_PSRAM             1
 193
 194 /* LED */
 195 #define CONFIG_AT91_LED
 196 #define CONFIG_RED_LED          AT91_PIN_PB7    /* this is the power led */
 197 #define CONFIG_GREEN_LED        AT91_PIN_PB8    /* this is the user1 led */
 198
 199 #define CONFIG_BOOTDELAY        3
 200
 201 /*
 202  * BOOTP options
 203  */
 204 #define CONFIG_BOOTP_BOOTFILESIZE       1
 205 #define CONFIG_BOOTP_BOOTPATH           1
 206 #define CONFIG_BOOTP_GATEWAY            1
 207 #define CONFIG_BOOTP_HOSTNAME           1
 208
 209 /*
 210  * Command line configuration.
 211  */
 212 #include <config_cmd_default.h>
 213 #undef CONFIG_CMD_BDI
 214 #undef CONFIG_CMD_IMI
 215 #undef CONFIG_CMD_AUTOSCRIPT
 216 #undef CONFIG_CMD_FPGA
 217 #undef CONFIG_CMD_LOADS
 218 #undef CONFIG_CMD_IMLS
 219
 220 #define CONFIG_CMD_PING         1
 221 #define CONFIG_CMD_DHCP         1
 222 #define CONFIG_CMD_NAND         1
 223 #define CONFIG_CMD_USB          1
 224
 225 /* SDRAM */
 226 #define CONFIG_NR_DRAM_BANKS    1
 227 #define PHYS_SDRAM              0x20000000
 228 #define PHYS_SDRAM_SIZE         0x04000000      /* 64 megs */
 229
 230 /* DataFlash */
 231 #define CONFIG_ATMEL_DATAFLASH_SPI
 232 #define CONFIG_HAS_DATAFLASH                    1
 233 #define CONFIG_SYS_SPI_WRITE_TOUT               (5 * CONFIG_SYS_HZ)
 234 #define CONFIG_SYS_MAX_DATAFLASH_BANKS          1
 235 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000      /* CS0 */
 236 #define AT91_SPI_CLK                            15000000
 237 #define DATAFLASH_TCSS                          (0x1a << 16)
 238 #define DATAFLASH_TCHS                          (0x1 << 24)
 239
 240 /* NOR flash, if populated */
 241 #define CONFIG_SYS_FLASH_CFI            1
 242 #define CONFIG_FLASH_CFI_DRIVER         1
 243 #define PHYS_FLASH_1                    0x10000000
 244 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 245 #define CONFIG_SYS_MAX_FLASH_SECT       256
 246 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 247
 248 /* NAND flash */
 249 #ifdef CONFIG_CMD_NAND
 250 #define CONFIG_NAND_ATMEL
 251 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 252 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 253 #define CONFIG_SYS_NAND_BASE            0x40000000
 254 #define CONFIG_SYS_NAND_DBW_8           1
 255 /* our ALE is AD21 */
 256 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
 257 /* our CLE is AD22 */
 258 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
 259 #define CONFIG_SYS_NAND_ENABLE_PIN      AT91_PIN_PD15
 260 #define CONFIG_SYS_NAND_READY_PIN       AT91_PIN_PB30
 261 #endif
 262
 263 #define CONFIG_CMD_JFFS2                1
 264 #define CONFIG_JFFS2_CMDLINE            1
 265 #define CONFIG_JFFS2_NAND               1
 266 #define CONFIG_JFFS2_DEV                "nand0" /* NAND device jffs2 lives on */
 267 #define CONFIG_JFFS2_PART_OFFSET        0       /* start of jffs2 partition */
 268 #define CONFIG_JFFS2_PART_SIZE          (256 * 1024 * 1024) /* partition size*/
 269
 270 /* PSRAM */
 271 #define PHYS_PSRAM                      0x70000000
 272 #define PHYS_PSRAM_SIZE                 0x00400000      /* 4MB */
 273
 274 /* Ethernet */
 275 #define CONFIG_MACB                     1
 276 #define CONFIG_RMII                     1
 277 #define CONFIG_NET_MULTI                1
 278 #define CONFIG_NET_RETRY_COUNT          20
 279 #define CONFIG_RESET_PHY_R              1
 280
 281 /* USB */
 282 #define CONFIG_USB_ATMEL
 283 #define CONFIG_USB_OHCI_NEW                     1
 284 #define CONFIG_DOS_PARTITION                    1
 285 #define CONFIG_SYS_USB_OHCI_CPU_INIT            1
 286 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00a00000      /* AT91SAM9263_UHP_BASE */
 287 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9263"
 288 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 289 #define CONFIG_USB_STORAGE                      1
 290
 291 #define CONFIG_SYS_LOAD_ADDR                    0x22000000      /* load address */
 292
 293 #define CONFIG_SYS_MEMTEST_START                PHYS_SDRAM
 294 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
 295
 296 #define CONFIG_SYS_USE_FLASH    1
 297 #undef CONFIG_SYS_USE_DATAFLASH
 298 #undef CONFIG_SYS_USE_NANDFLASH
 299
 300 #ifdef CONFIG_SYS_USE_DATAFLASH
 301
 302 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
 303 #define CONFIG_ENV_IS_IN_DATAFLASH
 304 #define CFG_MONITOR_BASE        (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 305 #define CONFIG_ENV_OFFSET       0x4200
 306 #define CONFIG_ENV_ADDR         (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
 307 #define CONFIG_ENV_SIZE         0x4200
 308 #define CONFIG_BOOTCOMMAND      "cp.b 0xC0042000 0x22000000 0x210000; bootm"
 309 #define CONFIG_BOOTARGS         "console=ttyS0,115200 " \
 310                                 "root=/dev/mtdblock0 " \
 311                                 "mtdparts=at91_nand:-(root) "\
 312                                 "rw rootfstype=jffs2"
 313
 314 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
 315
 316 /* bootstrap + u-boot + env + linux in nandflash */
 317 #define CONFIG_ENV_IS_IN_NAND
 318 #define CONFIG_ENV_OFFSET               0x60000
 319 #define CONFIG_ENV_OFFSET_REDUND        0x80000
 320 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 321 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0xA0000 0x200000; bootm"
 322 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "         \
 323                                 "root=/dev/mtdblock5 "          \
 324                                 "mtdparts=at91_nand:"           \
 325                                         "128k(bootstrap)ro,"    \
 326                                         "256k(uboot)ro,"        \
 327                                         "128k(env1)ro,"         \
 328                                         "128k(env2)ro,"         \
 329                                         "2M(linux),"            \
 330                                         "-(root) "              \
 331                                 "rw rootfstype=jffs2"
 332
 333 #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
 334
 335 #define CONFIG_ENV_IS_IN_FLASH  1
 336 #define CONFIG_ENV_OFFSET       0x40000
 337 #define CONFIG_ENV_SECT_SIZE    0x10000
 338 #define CONFIG_ENV_SIZE         0x10000
 339 #define CONFIG_ENV_OVERWRITE    1
 340
 341 /* JFFS Partition offset set */
 342 #define CONFIG_SYS_JFFS2_FIRST_BANK     0
 343 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
 344
 345 /* 512k reserved for u-boot */
 346 #define CONFIG_SYS_JFFS2_FIRST_SECTOR   11
 347
 348 #define CONFIG_BOOTCOMMAND              "run flashboot"
 349 #define CONFIG_ROOTPATH                 /ronetix/rootfs
 350 #define CONFIG_AUTOBOOT_PROMPT          "autoboot in %d seconds\n"
 351
 352 #define CONFIG_CON_ROT                  "fbcon=rotate:3 "
 353 #define CONFIG_BOOTARGS                 "root=/dev/mtdblock4 rootfstype=jffs2 "\
 354                                         CONFIG_CON_ROT
 355
 356 #define MTDIDS_DEFAULT                  "nor0=physmap-flash.0,nand0=nand"
 357 #define MTDPARTS_DEFAULT                \
 358         "mtdparts=physmap-flash.0:"     \
 359                 "256k(u-boot)ro,"       \
 360                 "64k(u-boot-env)ro,"    \
 361                 "1408k(kernel),"        \
 362                 "-(rootfs);"            \
 363         "nand:-(nand)"
 364
 365 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 366         "mtdids=" MTDIDS_DEFAULT "\0"                           \
 367         "mtdparts=" MTDPARTS_DEFAULT "\0"                       \
 368         "partition=nand0,0\0"                                   \
 369         "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"     \
 370         "nfsargs=setenv bootargs root=/dev/nfs rw "             \
 371                 CONFIG_CON_ROT                                  \
 372                 "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
 373         "addip=setenv bootargs $(bootargs) "                    \
 374                 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
 375                 ":$(hostname):eth0:off\0"                       \
 376         "ramboot=tftpboot 0x22000000 vmImage;"                  \
 377                 "run ramargs;run addip;bootm 22000000\0"        \
 378         "nfsboot=tftpboot 0x22000000 vmImage;"                  \
 379                 "run nfsargs;run addip;bootm 22000000\0"        \
 380         "flashboot=run ramargs;run addip;bootm 0x10050000\0"    \
 381         ""
 382
 383 #else
 384 #error "Undefined memory device"
 385 #endif
 386
 387 #define CONFIG_BAUDRATE                 115200
 388 #define CONFIG_SYS_BAUDRATE_TABLE       {115200 , 19200, 38400, 57600, 9600 }
 389
 390 #define CONFIG_SYS_PROMPT               "u-boot-pm9263> "
 391 #define CONFIG_SYS_CBSIZE               256
 392 #define CONFIG_SYS_MAXARGS              16
 393 #define CONFIG_SYS_PBSIZE               \
 394                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 395 #define CONFIG_SYS_LONGHELP             1
 396 #define CONFIG_CMDLINE_EDITING          1
 397
 398 #define ROUND(A, B)                     (((A) + (B)) & ~((B) - 1))
 399 /*
 400  * Size of malloc() pool
 401  */
 402 #define CONFIG_SYS_MALLOC_LEN   ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
 403 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* 128 bytes for initial data */
 404
 405 #define CONFIG_STACKSIZE                (32 * 1024)     /* regular stack */
 406
 407 #ifdef CONFIG_USE_IRQ
 408 #error CONFIG_USE_IRQ not supported
 409 #endif
 410
 411 #endif