include/configs/pico-imx7d.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2017 NXP Semiconductors
   4  *
   5  * Configuration settings for the i.MX7D Pico board.
   6  */
   7
   8 #ifndef __PICO_IMX7D_CONFIG_H
   9 #define __PICO_IMX7D_CONFIG_H
  10
  11 #include "mx7_common.h"
  12
  13 #define PHYS_SDRAM_SIZE         SZ_1G
  14
  15 /* Size of malloc() pool */
  16 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  17
  18 #define CONFIG_MXC_UART_BASE            UART5_IPS_BASE_ADDR
  19
  20 /* Network */
  21 #define CONFIG_FEC_MXC
  22 #define CONFIG_MII
  23 #define CONFIG_FEC_XCV_TYPE             RGMII
  24 #define CONFIG_ETHPRIME                 "FEC"
  25 #define CONFIG_FEC_MXC_PHYADDR          1
  26
  27 #define CONFIG_PHY_ATHEROS
  28
  29 /* ENET1 */
  30 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  31
  32 /* MMC Config */
  33 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  34
  35 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
  36 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  37
  38 #define CONFIG_EXTRA_ENV_SETTINGS \
  39         "script=boot.scr\0" \
  40         "image=zImage\0" \
  41         "console=ttymxc4\0" \
  42         "fdt_high=0xffffffff\0" \
  43         "initrd_high=0xffffffff\0" \
  44         "fdtfile=imx7d-pico-pi.dtb\0" \
  45         "fdt_addr=0x83000000\0" \
  46         "fdt_addr_r=0x83000000\0" \
  47         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  48         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  49         "ramdisk_addr_r=0x83000000\0" \
  50         "ramdiskaddr=0x83000000\0" \
  51         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  52         BOOTENV
  53
  54 #define BOOT_TARGET_DEVICES(func) \
  55         func(MMC, mmc, 0) \
  56         func(DHCP, dhcp, na)
  57
  58 #include <config_distro_bootcmd.h>
  59
  60 #define CONFIG_SYS_MEMTEST_START        0x80000000
  61 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
  62
  63 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  64 #define CONFIG_SYS_HZ                   1000
  65
  66 /* Physical Memory Map */
  67 #define CONFIG_NR_DRAM_BANKS            1
  68 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  69
  70 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  71 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  72 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  73
  74 #define CONFIG_SYS_INIT_SP_OFFSET \
  75         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  76 #define CONFIG_SYS_INIT_SP_ADDR \
  77         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  78
  79 /* I2C configs */
  80 #define CONFIG_SYS_I2C
  81 #define CONFIG_SYS_I2C_MXC
  82 #define CONFIG_SYS_I2C_MXC_I2C1
  83 #define CONFIG_SYS_I2C_MXC_I2C2
  84 #define CONFIG_SYS_I2C_MXC_I2C3
  85 #define CONFIG_SYS_I2C_MXC_I2C4
  86 #define CONFIG_SYS_I2C_SPEED            100000
  87
  88 /* PMIC */
  89 #define CONFIG_POWER
  90 #define CONFIG_POWER_I2C
  91 #define CONFIG_POWER_PFUZE3000
  92 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
  93
  94 /* FLASH and environment organization */
  95 #define CONFIG_ENV_SIZE                 SZ_8K
  96
  97 #define CONFIG_ENV_OFFSET                       (8 * SZ_64K)
  98 #define CONFIG_SYS_FSL_USDHC_NUM                2
  99
 100 #define CONFIG_SYS_MMC_ENV_DEV                  0
 101 #define CONFIG_SYS_MMC_ENV_PART         0
 102
 103 /* USB Configs */
 104 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 105 #define CONFIG_MXC_USB_PORTSC                   (PORT_PTS_UTMI | PORT_PTS_PTW)
 106 #define CONFIG_MXC_USB_FLAGS                    0
 107 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 108
 109 #define CONFIG_IMX_THERMAL
 110
 111 #endif