include/configs/pfla02.h

   1 /*
   2  * Copyright (C) Stefano Babic <sbabic@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7
   8 #ifndef __PCM058_CONFIG_H
   9 #define __PCM058_CONFIG_H
  10
  11 #ifdef CONFIG_SPL
  12 #define CONFIG_SPL_SPI_LOAD
  13 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
  14 #include "imx6_spl.h"
  15 #endif
  16
  17 #include "mx6_common.h"
  18
  19 /* Thermal */
  20 #define CONFIG_IMX_THERMAL
  21
  22 /* Serial */
  23 #define CONFIG_MXC_UART
  24 #define CONFIG_MXC_UART_BASE           UART4_BASE
  25 #define CONSOLE_DEV             "ttymxc3"
  26
  27 /* Early setup */
  28 #define CONFIG_DISPLAY_BOARDINFO_LATE
  29
  30
  31 /* Size of malloc() pool */
  32 #define CONFIG_SYS_MALLOC_LEN           (8 * SZ_1M)
  33
  34 /* Ethernet */
  35 #define CONFIG_MII
  36 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  37 #define CONFIG_FEC_XCV_TYPE             RGMII
  38 #define CONFIG_ETHPRIME                 "FEC"
  39 #define CONFIG_FEC_MXC_PHYADDR          3
  40
  41 /* SPI Flash */
  42 #define CONFIG_SF_DEFAULT_BUS           2
  43 #define CONFIG_SF_DEFAULT_CS            0
  44 #define CONFIG_SF_DEFAULT_SPEED         20000000
  45 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  46
  47 /* I2C Configs */
  48 #define CONFIG_SYS_I2C
  49 #define CONFIG_SYS_I2C_MXC
  50 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 0 */
  51 #define CONFIG_SYS_I2C_SPEED              100000
  52
  53 #ifndef CONFIG_SPL_BUILD
  54 #define CONFIG_CMD_NAND
  55 /* Enable NAND support */
  56 #define CONFIG_CMD_NAND_TRIMFFS
  57 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  58 #define CONFIG_SYS_NAND_BASE            0x40000000
  59 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  60 #define CONFIG_SYS_NAND_ONFI_DETECTION
  61 #endif
  62
  63 /* DMA stuff, needed for GPMI/MXS NAND support */
  64
  65 /* Filesystem support */
  66 #define CONFIG_MTD_PARTITIONS
  67 #define CONFIG_MTD_DEVICE
  68
  69 /* Various command support */
  70
  71 /* Physical Memory Map */
  72 #define CONFIG_NR_DRAM_BANKS           1
  73 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
  74
  75 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
  76 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
  77 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
  78
  79 #define CONFIG_SYS_INIT_SP_OFFSET \
  80         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  81 #define CONFIG_SYS_INIT_SP_ADDR \
  82         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  83
  84 /* MMC Configs */
  85 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  86 #define CONFIG_SYS_FSL_USDHC_NUM        2
  87
  88 /* Environment organization */
  89 #define CONFIG_ENV_IS_IN_SPI_FLASH
  90 #define CONFIG_ENV_SIZE                (16 * 1024)
  91 #define CONFIG_ENV_OFFSET               (1024 * SZ_1K)
  92 #define CONFIG_ENV_SECT_SIZE            (64 * SZ_1K)
  93 #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
  94 #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
  95 #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
  96 #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
  97 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  98 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
  99                                                 CONFIG_ENV_SECT_SIZE)
 100 #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 101
 102 #ifdef CONFIG_ENV_IS_IN_NAND
 103 #define CONFIG_ENV_OFFSET              (0x1E0000)
 104 #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 105 #endif
 106
 107 /* Default environment */
 108 #define CONFIG_EXTRA_ENV_SETTINGS \
 109         "addcons=setenv bootargs ${bootargs} "                          \
 110                 "console=${console},${baudrate}\0"                      \
 111         "addip=setenv bootargs ${bootargs} "                            \
 112                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 113                 "${netmask}:${hostname}:${netdev}:off\0"                \
 114         "addmisc=setenv bootargs ${bootargs} ${miscargs}\0"             \
 115         "addmtd=run mtdnand;run mtdspi;"                                \
 116                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
 117         "mtdnand=setenv mtdparts mtdparts=gpmi-nand:"                   \
 118                 "40m(Kernels),400m(root),-(nand)\0"                     \
 119         "mtdspi=setenv mtdparts ${mtdparts}"                            \
 120                 "';spi2.0:1024k(bootloader),"                           \
 121                         "64k(env1),64k(env2),-(rescue)'\0"              \
 122         "bootcmd=if test -n ${rescue};"                                 \
 123                 "then run swupdate;fi;run nandboot;run swupdate\0"      \
 124         "bootfile=uImage\0"                                             \
 125         "bootimage=uImage\0"                                            \
 126         "console=ttymxc3\0"                                             \
 127         "fdt_addr_r=0x18000000\0"                                       \
 128         "fdt_file=pfla02.dtb\0"                                         \
 129         "fdt_high=0xffffffff\0"                                         \
 130         "initrd_high=0xffffffff\0"                                      \
 131         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"              \
 132         "miscargs=panic=1 quiet\0"                                      \
 133         "mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0"         \
 134         "mmcboot=if run mmcload;then "                                  \
 135                 "run mmcargs addcons addmisc;"                          \
 136                         "bootm;fi\0"                                    \
 137         "mmcload=mmc rescan;"                                           \
 138                 "load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\
 139         "mmcpart=1\0"                                                   \
 140         "mmcroot=/dev/mmcblk0p1\0"                                      \
 141         "ubiroot=1\0"                                                   \
 142         "nandargs=setenv bootargs ubi.mtd=1 "                           \
 143                 "root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0"         \
 144         "nandboot=run mtdnand;ubi part nand0,0;"                        \
 145                 "ubi readvol ${kernel_addr_r} kernel${ubiroot};"        \
 146                 "run nandargs addip addcons addmtd addmisc;"            \
 147                 "bootm ${kernel_addr_r}\0"                              \
 148         "net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};"      \
 149                 "tftp ${fdt_addr_r} ${board_name}/${fdt_file};"         \
 150                 "run nfsargs addip addcons addmtd addmisc;"             \
 151                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 152         "net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};"   \
 153                 "run nfsargs addip addcons addmtd addmisc;"             \
 154                 "bootm ${kernel_addr_r}\0"                              \
 155         "nfsargs=setenv bootargs root=/dev/nfs"                         \
 156                 " nfsroot=${serverip}:${nfsroot},v3 panic=1\0"          \
 157         "swupdate=setenv bootargs root=/dev/ram;"                       \
 158                 "run addip addcons addmtd addmisc;"                     \
 159                 "sf probe;"                                             \
 160                 "sf read ${kernel_addr_r} 120000 600000;"               \
 161                 "sf read 14000000 730000 800000;"                       \
 162                 "bootm ${kernel_addr_r} 14000000\0"
 163
 164 #endif