include/configs/pengwyn.h

   1 /*
   2  * pengwyn.h
   3  *
   4  * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
   5  *
   6  * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_PENGWYN_H
  12 #define __CONFIG_PENGWYN_H
  13
  14 #define CONFIG_NAND
  15 #define CONFIG_SERIAL1
  16 #define CONFIG_CONS_INDEX               1
  17
  18 #include <configs/ti_am335x_common.h>
  19
  20 /* Clock Defines */
  21 #define V_OSCK                          24000000
  22 #define V_SCLK                          V_OSCK
  23
  24 /* set env size */
  25 #define CONFIG_ENV_SIZE                 0x4000
  26
  27 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  28
  29 #ifndef CONFIG_SPL_BUILD
  30 #define CONFIG_EXTRA_ENV_SETTINGS \
  31         "loadaddr=0x80200000\0" \
  32         "fdtaddr=0x80F80000\0" \
  33         "bootpart=0:2\0" \
  34         "bootdir=/boot\0" \
  35         "bootfile=zImage\0" \
  36         "fdtfile=am335x-pengwyn.dtb\0" \
  37         "console=ttyO0,115200n8\0" \
  38         "optargs=\0" \
  39         "mmcdev=0\0" \
  40         "mmcroot=/dev/mmcblk0p2 ro\0" \
  41         "mmcrootfstype=ext4 rootwait\0" \
  42         "rootpath=/export/rootfs\0" \
  43         "nfsopts=nolock\0" \
  44         "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
  45                 "::off\0" \
  46         "mmcargs=setenv bootargs console=${console} " \
  47                 "${optargs} " \
  48                 "root=${mmcroot} " \
  49                 "rootfstype=${mmcrootfstype}\0" \
  50         "netargs=setenv bootargs console=${console} " \
  51                 "${optargs} " \
  52                 "root=/dev/nfs " \
  53                 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
  54                 "ip=dhcp\0" \
  55         "bootenv=uEnv.txt\0" \
  56         "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
  57         "importbootenv=echo Importing environment from mmc ...; " \
  58                 "env import -t $loadaddr $filesize\0" \
  59         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
  60         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
  61         "mmcloados=run mmcargs; " \
  62                 "bootz ${loadaddr} - ${fdtaddr};\0" \
  63         "mmcboot=mmc dev ${mmcdev}; " \
  64                 "if mmc rescan; then " \
  65                         "echo SD/MMC found on device ${mmcdev};" \
  66                         "if run loadbootenv; then " \
  67                                 "echo Loaded environment from ${bootenv};" \
  68                                 "run importbootenv;" \
  69                         "fi;" \
  70                         "if test -n $uenvcmd; then " \
  71                                 "echo Running uenvcmd ...;" \
  72                                 "run uenvcmd;" \
  73                         "fi;" \
  74                         "if run loadimage; then " \
  75                                 "run loadfdt;" \
  76                                 "run mmcloados;" \
  77                         "fi;" \
  78                 "fi;\0" \
  79         "netboot=echo Booting from network ...; " \
  80                 "setenv autoload no; " \
  81                 "dhcp; " \
  82                 "tftp ${loadaddr} ${bootfile}; " \
  83                 "tftp ${fdtaddr} ${fdtfile}; " \
  84                 "run netargs; " \
  85                 "bootz ${loadaddr} - ${fdtaddr}\0" \
  86         "mtdids=" MTDIDS_DEFAULT "\0" \
  87         "mtdparts=" MTDPARTS_DEFAULT "\0" \
  88         "nandargs=setenv bootargs console=${console} " \
  89                 "${optargs} " \
  90                 "root=${nandroot} " \
  91                 "rootfstype=${nandrootfstype}\0" \
  92         "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
  93         "nandrootfstype=ubifs rootwait=1\0" \
  94         "nandboot=echo Booting from nand ...; " \
  95                 "run nandargs; " \
  96                 "nand read ${fdtaddr} u-boot-spl-os; " \
  97                 "nand read ${loadaddr} kernel; " \
  98                 "bootz ${loadaddr} - ${fdtaddr}\0"
  99 #endif
 100
 101 #define CONFIG_BOOTCOMMAND \
 102         "run mmcboot;" \
 103         "run nandboot;"
 104
 105 /* NS16550 Configuration: primary UART via FTDI */
 106 #define CONFIG_SYS_NS16550_COM1         0x44e09000
 107 #define CONFIG_BAUDRATE                 115200
 108
 109 /* I2C Configuration */
 110 #define CONFIG_SYS_I2C_SPEED            100000
 111 #define CONFIG_CMD_EEPROM
 112 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 113 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 114 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 115
 116 /* SPL */
 117 #define CONFIG_SPL_POWER_SUPPORT
 118 #define CONFIG_SPL_YMODEM_SUPPORT
 119
 120 /* NAND support */
 121 #define CONFIG_CMD_NAND
 122 #define CONFIG_NAND_OMAP_GPMC
 123 #define CONFIG_NAND_OMAP_ELM
 124
 125 /* NAND Configuration. */
 126 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 127 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 128                                          CONFIG_SYS_NAND_PAGE_SIZE)
 129 #define CONFIG_SYS_NAND_PAGE_SIZE       4096
 130 #define CONFIG_SYS_NAND_OOBSIZE         224
 131 #define CONFIG_SYS_NAND_ONFI_DETECTION
 132 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*4096)
 133 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 134 #define CONFIG_SYS_NAND_ECCPOS          {   2,   3,   4,   5,   6,   7,   8,   9,  10,  11,  12,  13,  14,  15,  16,  17,\
 135                                            18,  19,  20,  21,  22,  23,  24,  25,  26,  27,  28,  29,  30,  31,  32,  33,\
 136                                            34,  35,  36,  37,  38,  39,  40,  41,  42,  43,  44,  45,  46,  47,  48,  49,\
 137                                            50,  51,  52,  53,  54,  55,  56,  57,  58,  59,  60,  61,  62,  63,  64,  65,\
 138                                            66,  67,  68,  69,  70,  71,  72,  73,  74,  75,  76,  77,  78,  79,  80,  81,\
 139                                            82,  83,  84,  85,  86,  87,  88,  89,  90,  91,  92,  93,  94,  95,  96,  97,\
 140                                            98,  99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\
 141                                           114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\
 142                                           134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\
 143                                           154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\
 144                                           174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\
 145                                           194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
 146
 147 #define CONFIG_SYS_NAND_ECCSIZE         512
 148 #define CONFIG_SYS_NAND_ECCBYTES        26
 149 #define CONFIG_SYS_NAND_ECCSTEPS        8
 150 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * \
 151                                                 CONFIG_SYS_NAND_ECCSTEPS)
 152 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH16_CODE_HW
 153 /* END NAND Configuration. */
 154
 155 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 156 /* #define CONFIG_SYS_NAND_U_BOOT_OFFS  0x80000 */
 157 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x200000
 158
 159 #define CONFIG_CMD_MTDPARTS
 160
 161 #define CONFIG_CMD_DIAG /* monitor functions : Diagnostics */
 162
 163 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
 164 /* Size must be a multiple of Nand erase size (524288 b) */
 165 #define MTDPARTS_DEFAULT                "mtdparts=omap2-nand.0:512k(SPL)," \
 166                                         "512k(SPL.backup1)," \
 167                                         "512k(SPL.backup2)," \
 168                                         "512k(SPL.backup3),1536k(u-boot)," \
 169                                         "512k(u-boot-spl-os)," \
 170                                         "512k(u-boot-env),5m(kernel),-(rootfs)"
 171 #define CONFIG_ENV_IS_IN_NAND
 172 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
 173 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 174 /* NAND: SPL falcon mode configs */
 175 #ifdef CONFIG_SPL_OS_BOOT
 176 #define CONFIG_CMD_SPL_NAND_OFS         0x240000 /* un-assigned */
 177 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 178 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 179 #endif
 180
 181 /*
 182  * USB configuration.  We enable MUSB support, both for host and for
 183  * gadget.  We set USB0 as peripheral and USB1 as host, based on the
 184  * board schematic and physical port wired to each.  Then for host we
 185  * add mass storage support.
 186  */
 187 #define CONFIG_USB_MUSB_DSPS
 188 #define CONFIG_ARCH_MISC_INIT
 189 #define CONFIG_USB_MUSB_PIO_ONLY
 190 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 191 #define CONFIG_AM335X_USB0
 192 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 193 #define CONFIG_AM335X_USB1
 194 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 195
 196 #if defined(CONFIG_SPL_BUILD)
 197 /* disable host part of MUSB in SPL */
 198 /* Disable CPSW SPL support so we fit within the 101KiB limit. */
 199 #endif
 200
 201 /* CPSW ethernet */
 202 #define CONFIG_NET_MULTI
 203
 204 /* Network */
 205 #define CONFIG_PHYLIB
 206 #define CONFIG_PHY_RESET        1
 207 #define CONFIG_PHY_NATSEMI
 208 #define CONFIG_PHY_REALTEK
 209
 210 /* CPSW support */
 211
 212 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/am33xx/u-boot-spl.lds"
 213
 214 #endif  /* ! __CONFIG_PENGWYN_H */