2 * (C) Copyright 2003-2004
3 * MPC Data Limited (http://www.mpc-data.co.uk)
4 * Dave Peverley <dpeverley at mpc-data.co.uk>
6 * Configuation settings for the TI OMAP Perseus 2 board.
8 * See file CREDITS for list of people who contributed to this
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30 /* allow to overwrite serial and ethaddr */
31 #define CONFIG_ENV_OVERWRITE
34 * High Level Configuration Options
38 #define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
39 #define CONFIG_OMAP 1 /* in a TI OMAP core */
40 #define CONFIG_OMAP730 1 /* which is in a 730 */
41 #define CONFIG_P2_OMAP730 1 /* a Perseus 2 Board */
45 * The OMAP730 Perseus 2 has 13MHz input clock
48 #define CONFIG_SYS_CLK_FREQ 13000000
50 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
52 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
53 #define CONFIG_SETUP_MEMORY_TAGS 1
56 * Size of malloc() pool
59 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
65 #define CONFIG_LAN91C96
66 #define CONFIG_LAN91C96_BASE 0x04000300
67 #define CONFIG_LAN91C96_EXT_PHY
70 * NS16550 Configuration
73 #define CONFIG_SYS_NS16550
74 #define CONFIG_SYS_NS16550_SERIAL
75 #define CONFIG_SYS_NS16550_REG_SIZE (1)
76 #define CONFIG_SYS_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */
77 #define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart
81 * select serial console configuration
84 #define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP730 Perseus 2 */
86 #define CONFIG_CONS_INDEX 1
87 #define CONFIG_BAUDRATE 115200
88 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
92 * Command line configuration.
94 #include <config_cmd_default.h>
96 #define CONFIG_CMD_DHCP
102 #define CONFIG_BOOTP_SUBNETMASK
103 #define CONFIG_BOOTP_GATEWAY
104 #define CONFIG_BOOTP_HOSTNAME
105 #define CONFIG_BOOTP_BOOTPATH
108 #include <configs/omap730.h>
109 #include <configs/h2_p2_dbg_board.h>
111 #define CONFIG_BOOTDELAY 3
112 #define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw ip=bootp"
114 #define CONFIG_LOADADDR 0x10000000
116 #define CONFIG_ETHADDR
117 #define CONFIG_NETMASK 255.255.255.0
118 #define CONFIG_IPADDR 192.168.0.23
119 #define CONFIG_SERVERIP 192.150.0.100
120 #define CONFIG_BOOTFILE "uImage" /* File to load */
122 #if defined(CONFIG_CMD_KGDB)
123 #define CONFIG_KGDB_BAUDRATE 115200 /* Speed to run kgdb serial port */
124 #define CONFIG_KGDB_SER_INDEX 1 /* Which serial port to use */
128 * Miscellaneous configurable options
131 #define CONFIG_SYS_LONGHELP /* undef to save memory */
132 #define CONFIG_SYS_PROMPT "OMAP730 P2 # " /* Monitor Command Prompt */
133 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
134 /* Print Buffer Size */
135 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
136 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
137 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
139 #define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
140 #define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
142 #define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
144 /* The OMAP730 has 3 general purpose MPU timers, they can be driven by
145 * the RefClk (12Mhz) or by DPLL1. This time is further subdivided by a
148 #define CONFIG_SYS_TIMERBASE 0xFFFEC500 /* use timer 1 */
149 #define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */
150 #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
152 /*-----------------------------------------------------------------------
155 * The stack sizes are set up in start.S using the settings below
158 #define CONFIG_STACKSIZE (128*1024) /* regular stack */
159 #ifdef CONFIG_USE_IRQ
160 #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
161 #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
164 /*-----------------------------------------------------------------------
165 * Physical Memory Map
168 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
169 #define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
170 #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
172 #if defined(CONFIG_CS0_BOOT)
173 #define PHYS_FLASH_1 0x0C000000
174 #elif defined(CONFIG_CS3_BOOT)
175 #define PHYS_FLASH_1 0x00000000
177 #error Unknown Boot Chip-Select number
180 #define PHYS_SRAM 0x20000000
182 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
184 /*-----------------------------------------------------------------------
185 * FLASH and environment organization
188 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
189 #define PHYS_FLASH_SIZE 0x02000000 /* 32MB */
190 #define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
191 /* addr of environment */
192 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x020000)
194 /* timeout values are in ticks */
195 #define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
196 #define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
198 #define CONFIG_ENV_IS_IN_FLASH 1
199 #define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
200 #define CONFIG_ENV_OFFSET 0x20000 /* environment starts here */
202 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
203 #define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM
205 #endif /* ! __CONFIG_H */