Merge git://git.denx.de/u-boot-fsl-qoriq
[oweals/u-boot.git] / include / configs / omap3_pandora.h
1 /*
2  * (C) Copyright 2008-2010
3  * GraÅžvydas Ignotas <notasas@gmail.com>
4  *
5  * Configuration settings for the OMAP3 Pandora.
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
14
15 /* override base for compatibility with MLO the device ships with */
16
17 #include <configs/ti_omap3_common.h>
18
19 #define CONFIG_MISC_INIT_R
20 #define CONFIG_REVISION_TAG             1
21
22 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
23
24 #define CONFIG_SYS_DEVICE_NULLDEV       1
25
26 /*
27  * Hardware drivers
28  */
29
30 /* TWL4030 LED */
31 #define CONFIG_TWL4030_LED
32
33 /*
34  * NS16550 Configuration
35  */
36 #undef CONFIG_SYS_NS16550_CLK
37 #define CONFIG_SYS_NS16550_SERIAL
38 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
39 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
40 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
41 #define CONFIG_SERIAL3                  3
42
43 /* commands to include */
44
45 /*
46  * Board NAND Info.
47  */
48 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
49                                                         /* to access nand */
50 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_SW
51 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
52 #define CONFIG_SYS_NAND_OOBSIZE         64
53
54 #ifdef CONFIG_NAND
55 #define CONFIG_MTD_PARTITIONS   /* required for UBI partition support */
56 #endif
57
58
59 #define CONFIG_BOOTCOMMAND \
60         "run distro_bootcmd; " \
61         "setenv bootargs ${bootargs_ubi}; " \
62         "if mmc rescan && load mmc 0:1 ${loadaddr} autoboot.scr; then " \
63                 "source ${loadaddr}; " \
64         "fi; " \
65         "ubi part boot && ubifsmount ubi:boot && " \
66                 "ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
67
68 #define BOOT_TARGET_DEVICES(func) \
69         func(MMC, mmc, 0) \
70
71 #include <config_distro_bootcmd.h>
72
73 #define CONFIG_EXTRA_ENV_SETTINGS \
74         DEFAULT_LINUX_BOOT_ENV \
75         "usbtty=cdc_acm\0" \
76         "bootargs_ubi=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
77                 "rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
78         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
79         BOOTENV \
80
81 /* memtest works on */
82 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
83 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
84                                         0x01F00000) /* 31MB */
85
86 #if defined(CONFIG_NAND)
87 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
88 #endif
89
90 /* Monitor at start of flash */
91 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
92
93
94 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
95 #define CONFIG_ENV_OFFSET               0x260000
96 #define CONFIG_ENV_ADDR                 0x260000
97
98 #endif                          /* __CONFIG_H */