Merge branch 'master' of git://git.denx.de/u-boot-i2c
[oweals/u-boot.git] / include / configs / omap3_pandora.h
1 /*
2  * (C) Copyright 2008-2010
3  * GraÅžvydas Ignotas <notasas@gmail.com>
4  *
5  * Configuration settings for the OMAP3 Pandora.
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
14 #define CONFIG_NAND
15
16 /* override base for compatibility with MLO the device ships with */
17 #define CONFIG_SYS_TEXT_BASE            0x80008000
18
19 #include <configs/ti_omap3_common.h>
20
21 #define CONFIG_MISC_INIT_R
22 #define CONFIG_REVISION_TAG             1
23
24 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
25
26 #define CONFIG_SYS_DEVICE_NULLDEV       1
27
28 /*
29  * Hardware drivers
30  */
31
32 /* I2C Support */
33 #define CONFIG_SYS_I2C_OMAP34XX
34
35 /* TWL4030 LED */
36 #define CONFIG_TWL4030_LED
37
38 /*
39  * NS16550 Configuration
40  */
41 #undef CONFIG_SYS_NS16550_CLK
42 #define CONFIG_SYS_NS16550_SERIAL
43 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
44 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
45 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
46 #define CONFIG_SERIAL3                  3
47
48 /* commands to include */
49
50 /*
51  * Board NAND Info.
52  */
53 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
54                                                         /* to access nand */
55 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
56 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_SW
57 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
58 #define CONFIG_SYS_NAND_OOBSIZE         64
59
60 #ifdef CONFIG_NAND
61 #define CONFIG_CMD_UBIFS        /* Read-only UBI volume operations */
62
63 #define CONFIG_RBTREE           /* required by CONFIG_CMD_UBI */
64 #define CONFIG_LZO              /* required by CONFIG_CMD_UBIFS */
65
66 #define CONFIG_MTD_PARTITIONS   /* required for UBI partition support */
67
68 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
69 #define MTDPARTS_DEFAULT                "mtdparts=omap2-nand.0:512k(xloader),"\
70                                         "1920k(uboot),128k(uboot-env),"\
71                                         "10m(boot),-(rootfs)"
72 #else
73 #define MTDPARTS_DEFAULT
74 #endif
75
76
77 #define CONFIG_BOOTCOMMAND \
78         "run distro_bootcmd; " \
79         "setenv bootargs ${bootargs_ubi}; " \
80         "if mmc rescan && load mmc 0:1 ${loadaddr} autoboot.scr; then " \
81                 "source ${loadaddr}; " \
82         "fi; " \
83         "ubi part boot && ubifsmount ubi:boot && " \
84                 "ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
85
86 #define BOOT_TARGET_DEVICES(func) \
87         func(MMC, mmc, 0) \
88
89 #include <config_distro_bootcmd.h>
90
91 #define CONFIG_EXTRA_ENV_SETTINGS \
92         DEFAULT_LINUX_BOOT_ENV \
93         "usbtty=cdc_acm\0" \
94         "bootargs_ubi=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
95                 "rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
96         "mtdparts=" MTDPARTS_DEFAULT "\0" \
97         BOOTENV \
98
99 /* memtest works on */
100 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
101 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
102                                         0x01F00000) /* 31MB */
103
104 #if defined(CONFIG_NAND)
105 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
106 #endif
107
108 /* Monitor at start of flash */
109 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
110
111 #define CONFIG_ENV_IS_IN_NAND           1
112 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
113
114 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
115 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
116 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
117
118 #endif                          /* __CONFIG_H */