Convert CONFIG_MTD_PARTITIONS et al to Kconfig
[oweals/u-boot.git] / include / configs / omap3_pandora.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2008-2010
4  * GraÅžvydas Ignotas <notasas@gmail.com>
5  *
6  * Configuration settings for the OMAP3 Pandora.
7  */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
13
14 /* override base for compatibility with MLO the device ships with */
15
16 #include <configs/ti_omap3_common.h>
17
18 #define CONFIG_MISC_INIT_R
19 #define CONFIG_REVISION_TAG             1
20
21 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
22
23 #define CONFIG_SYS_DEVICE_NULLDEV       1
24
25 /*
26  * Hardware drivers
27  */
28
29 /* TWL4030 LED */
30 #define CONFIG_TWL4030_LED
31
32 /*
33  * NS16550 Configuration
34  */
35 #undef CONFIG_SYS_NS16550_CLK
36 #define CONFIG_SYS_NS16550_SERIAL
37 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
38 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
39 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
40 #define CONFIG_SERIAL3                  3
41
42 /* commands to include */
43
44 /*
45  * Board NAND Info.
46  */
47 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
48                                                         /* to access nand */
49 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_SW
50 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
51 #define CONFIG_SYS_NAND_OOBSIZE         64
52
53
54 #define CONFIG_BOOTCOMMAND \
55         "run distro_bootcmd; " \
56         "setenv bootargs ${bootargs_ubi}; " \
57         "if mmc rescan && load mmc 0:1 ${loadaddr} autoboot.scr; then " \
58                 "source ${loadaddr}; " \
59         "fi; " \
60         "ubi part boot && ubifsmount ubi:boot && " \
61                 "ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
62
63 #define BOOT_TARGET_DEVICES(func) \
64         func(MMC, mmc, 0) \
65
66 #include <config_distro_bootcmd.h>
67
68 #define CONFIG_EXTRA_ENV_SETTINGS \
69         DEFAULT_LINUX_BOOT_ENV \
70         "usbtty=cdc_acm\0" \
71         "bootargs_ubi=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
72                 "rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
73         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
74         BOOTENV \
75
76 /* memtest works on */
77 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
78 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
79                                         0x01F00000) /* 31MB */
80
81 #if defined(CONFIG_NAND)
82 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
83 #endif
84
85 /* Monitor at start of flash */
86 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
87
88
89 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
90 #define CONFIG_ENV_OFFSET               0x260000
91 #define CONFIG_ENV_ADDR                 0x260000
92
93 #endif                          /* __CONFIG_H */