sunxi: Add support for using MII phy-s with the GMAC nic
[oweals/u-boot.git] / include / configs / omap3_logic.h
1 /*
2  * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
3  *      Peter Barada <peter.barada@logicpd.com>
4  *
5  * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
6  * reference boards.
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 /*
15  * High Level Configuration Options
16  */
17 #define CONFIG_OMAP                     /* in a TI OMAP core */
18 #define CONFIG_OMAP34XX                 /* which is a 34XX */
19 #define CONFIG_OMAP3_LOGIC              /* working with Logic OMAP boards */
20 #define CONFIG_OMAP_GPIO
21 #define CONFIG_OMAP_COMMON
22
23 #define CONFIG_SYS_TEXT_BASE    0x80400000
24
25 #define CONFIG_SDRC     /* The chip has SDRC controller */
26
27 #include <asm/arch/cpu.h>       /* get chip and board defs */
28 #include <asm/arch/omap3.h>
29
30 /*
31  * Display CPU and Board information
32  */
33 #define CONFIG_DISPLAY_CPUINFO
34 #define CONFIG_DISPLAY_BOARDINFO
35
36 /* Clock Defines */
37 #define V_OSCK                  26000000        /* Clock output from T2 */
38 #define V_SCLK                  (V_OSCK >> 1)
39
40 #define CONFIG_MISC_INIT_R              /* misc_init_r dumps the die id */
41
42 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
43 #define CONFIG_SETUP_MEMORY_TAGS
44 #define CONFIG_INITRD_TAG
45 #define CONFIG_REVISION_TAG
46
47 #define CONFIG_CMDLINE_EDITING                  /* cmd line edit/history */
48 #define CONFIG_ZERO_BOOTDELAY_CHECK             /* check keypress w/no delay */
49
50 /*
51  * Size of malloc() pool
52  */
53 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
54                                                 /* Sector */
55 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10))
56
57 /*
58  * Hardware drivers
59  */
60
61 /*
62  * NS16550 Configuration
63  */
64 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
65
66 #define CONFIG_SYS_NS16550
67 #define CONFIG_SYS_NS16550_SERIAL
68 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
69 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
70
71 /*
72  * select serial console configuration
73  */
74 #define CONFIG_CONS_INDEX               1
75 #define CONFIG_SYS_NS16550_COM1         OMAP34XX_UART1
76 #define CONFIG_SERIAL1                  1       /* UART1 on OMAP Logic boards */
77
78 /* allow to overwrite serial and ethaddr */
79 #define CONFIG_ENV_OVERWRITE
80 #define CONFIG_BAUDRATE                 115200
81 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
82                                         115200}
83 #define CONFIG_GENERIC_MMC
84 #define CONFIG_MMC
85 #define CONFIG_OMAP_HSMMC
86 #define CONFIG_DOS_PARTITION
87
88 /* commands to include */
89 #include <config_cmd_default.h>
90
91 #define CONFIG_CMD_CACHE
92 #define CONFIG_CMD_EXT2         /* EXT2 Support                 */
93 #define CONFIG_CMD_FAT          /* FAT support                  */
94 #define CONFIG_CMD_JFFS2        /* JFFS2 Support                */
95 #define CONFIG_CMD_MTDPARTS     /* Enable MTD parts commands */
96 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
97 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
98 #define MTDPARTS_DEFAULT                "mtdparts=omap2-nand.0:512k(x-loader),"\
99                                         "1920k(u-boot),128k(u-boot-env),"\
100                                         "4m(kernel),-(fs)"
101
102 #define CONFIG_CMD_I2C          /* I2C serial bus support       */
103 #define CONFIG_CMD_MMC          /* MMC support                  */
104 #define CONFIG_CMD_NAND         /* NAND support                 */
105 #define CONFIG_CMD_NAND_LOCK_UNLOCK     /* nand (un)lock commands       */
106 #define CONFIG_CMD_NET      /* bootp, tftpboot, rarpboot    */
107 #define CONFIG_CMD_PING
108 #define CONFIG_CMD_DHCP
109 #define CONFIG_CMD_SETEXPR      /* Evaluate expressions         */
110
111 #undef CONFIG_CMD_FLASH         /* flinfo, erase, protect       */
112 #undef CONFIG_CMD_FPGA          /* FPGA configuration Support   */
113 #undef CONFIG_CMD_IMI           /* iminfo                       */
114 #undef CONFIG_CMD_IMLS          /* List all found images        */
115
116 #define CONFIG_SYS_NO_FLASH
117
118 /*
119  * I2C
120  */
121 #define CONFIG_SYS_I2C
122 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
123 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
124 #define CONFIG_SYS_I2C_OMAP34XX
125
126 /*
127  * TWL4030
128  */
129 #define CONFIG_TWL4030_POWER
130
131 /*
132  * Board NAND Info.
133  */
134 #define CONFIG_SYS_NAND_QUIET_TEST
135 #define CONFIG_NAND_OMAP_GPMC
136 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
137                                                         /* to access nand */
138 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
139                                                         /* to access nand at */
140                                                         /* CS0 */
141
142 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
143                                                         /* NAND devices */
144 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT  16
145 #define CONFIG_JFFS2_NAND
146 /* nand device jffs2 lives on */
147 #define CONFIG_JFFS2_DEV                "nand0"
148 /* start of jffs2 partition */
149 #define CONFIG_JFFS2_PART_OFFSET        0x680000
150 #define CONFIG_JFFS2_PART_SIZE          0xf980000       /* size of jffs2 */
151                                                         /* partition */
152
153 /* Environment information */
154 #define CONFIG_BOOTDELAY                2
155
156 /*
157  * PREBOOT assumes the 4.3" display is attached.  User can interrupt
158  * and modify display variable to suit their needs.
159  */
160 #define CONFIG_PREBOOT \
161         "echo ======================NOTICE============================;"\
162         "echo \"The u-boot environment is not set.\";"                  \
163         "echo \"If using a display a valid display varible for your panel\";" \
164         "echo \"needs to be set.\";"                                    \
165         "echo \"Valid display options are:\";"                          \
166         "echo \"  2 == LQ121S1DG31     TFT SVGA    (12.1)  Sharp\";"    \
167         "echo \"  3 == LQ036Q1DA01     TFT QVGA    (3.6)   Sharp w/ASIC\";" \
168         "echo \"  5 == LQ064D343       TFT VGA     (6.4)   Sharp\";"    \
169         "echo \"  7 == LQ10D368        TFT VGA     (10.4)  Sharp\";"    \
170         "echo \" 15 == LQ043T1DG01     TFT WQVGA   (4.3)   Sharp (DEFAULT)\";" \
171         "echo \" vga[-dvi or -hdmi]    LCD VGA     640x480\";"          \
172         "echo \" svga[-dvi or -hdmi]   LCD SVGA    800x600\";"          \
173         "echo \" xga[-dvi or -hdmi]    LCD XGA     1024x768\";"         \
174         "echo \" 720p[-dvi or -hdmi]   LCD 720P    1280x720\";"         \
175         "echo \"Defaulting to 4.3 LCD panel (display=15).\";"           \
176         "setenv display 15;"                                            \
177         "setenv preboot;"                                               \
178         "saveenv;"
179
180
181 #define CONFIG_EXTRA_ENV_SETTINGS \
182         "loadaddr=0x81000000\0" \
183         "bootfile=uImage\0" \
184         "mtdids=" MTDIDS_DEFAULT "\0"   \
185         "mtdparts=" MTDPARTS_DEFAULT "\0" \
186         "mmcdev=0\0" \
187         "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
188                         "if run loadbootscript; then " \
189                                 "run bootscript; " \
190                         "else " \
191                                 "run defaultboot;" \
192                         "fi; " \
193                 "else run defaultboot; fi\0" \
194         "defaultboot=run mmcramboot\0" \
195         "consoledevice=ttyO0\0" \
196         "display=15\0" \
197         "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
198         "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
199         "rotation=0\0" \
200         "vrfb_arg=if itest ${rotation} -ne 0; then " \
201                 "setenv bootargs ${bootargs} omapfb.vrfb=y " \
202                 "omapfb.rotate=${rotation}; " \
203                 "fi\0" \
204         "otherbootargs=ignore_loglevel early_printk no_console_suspend\0" \
205         "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \
206         "common_bootargs=setenv bootargs ${bootargs} display=${display} " \
207                 "${otherbootargs};" \
208                 "run addmtdparts; " \
209                 "run vrfb_arg\0" \
210         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
211         "bootscript=echo 'Running bootscript from mmc ...'; " \
212                 "source ${loadaddr}\0" \
213         "loaduimage=mmc rescan ${mmcdev}; " \
214                 "fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
215         "ramdisksize=64000\0" \
216         "ramdiskaddr=0x82000000\0" \
217         "ramdiskimage=rootfs.ext2.gz.uboot\0" \
218         "ramargs=run setconsole; setenv bootargs console=${console} " \
219                 "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
220         "mmcramboot=echo 'Booting kernel from mmc w/ramdisk...'; " \
221                 "run ramargs; " \
222                 "run common_bootargs; " \
223                 "run dump_bootargs; " \
224                 "run loaduimage; " \
225                 "fatload mmc ${mmcdev} ${ramdiskaddr} ${ramdiskimage}; "\
226                 "bootm ${loadaddr} ${ramdiskaddr}\0" \
227         "ramboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
228                 "run ramargs; " \
229                 "run common_bootargs; " \
230                 "run dump_bootargs; " \
231                 "tftpboot ${loadaddr} ${bootfile}; "\
232                 "tftpboot ${ramdiskaddr} ${ramdiskimage}; "\
233                 "bootm ${loadaddr} ${ramdiskaddr}\0"
234
235 #define CONFIG_BOOTCOMMAND \
236         "run autoboot"
237
238 #define CONFIG_AUTO_COMPLETE
239 /*
240  * Miscellaneous configurable options
241  */
242 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
243 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
244 #define CONFIG_SYS_PROMPT               "OMAP Logic # "
245 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
246 /* Print Buffer Size */
247 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
248                                         sizeof(CONFIG_SYS_PROMPT) + 16)
249 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
250 /* Boot Argument Buffer Size */
251 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
252 /* memtest works on */
253 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
254 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
255                                         0x01F00000) /* 31MB */
256
257 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
258                                                                 /* address */
259
260 /*
261  * OMAP3 has 12 GP timers, they can be driven by the system clock
262  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
263  * This rate is divided by a local divisor.
264  */
265 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
266 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
267
268 /*
269  * Physical Memory Map
270  */
271 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
272 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
273 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
274
275 /*
276  * FLASH and environment organization
277  */
278
279 /* **** PISMO SUPPORT *** */
280
281 /* Configure the PISMO */
282 #define PISMO1_NAND_SIZE                GPMC_SIZE_128M
283
284 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
285
286 #if defined(CONFIG_CMD_NAND)
287 #define CONFIG_SYS_FLASH_BASE           PISMO1_NAND_BASE
288 #elif defined(CONFIG_CMD_ONENAND)
289 #define CONFIG_SYS_FLASH_BASE           PISMO1_ONEN_BASE
290 #endif
291
292 /* Monitor at start of flash */
293 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
294
295 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
296
297 #if defined(CONFIG_CMD_NAND)
298 #define CONFIG_NAND_OMAP_GPMC
299 #define CONFIG_ENV_IS_IN_NAND
300 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
301 #endif
302
303 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
304 #define CONFIG_ENV_ADDR                 CONFIG_ENV_OFFSET
305
306 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
307 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
308 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
309 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
310                                          CONFIG_SYS_INIT_RAM_SIZE - \
311                                          GENERATED_GBL_DATA_SIZE)
312
313 /*
314  * SMSC922x Ethernet
315  */
316 #if defined(CONFIG_CMD_NET)
317
318 #define CONFIG_SMC911X
319 #define CONFIG_SMC911X_16_BIT
320 #define CONFIG_SMC911X_BASE     0x08000000
321
322 #endif /* (CONFIG_CMD_NET) */
323
324 /*
325  * BOOTP fields
326  */
327
328 #define CONFIG_BOOTP_SUBNETMASK         0x00000001
329 #define CONFIG_BOOTP_GATEWAY            0x00000002
330 #define CONFIG_BOOTP_HOSTNAME           0x00000004
331 #define CONFIG_BOOTP_BOOTPATH           0x00000010
332
333 #endif /* __CONFIG_H */