sunxi: Add support for using MII phy-s with the GMAC nic
[oweals/u-boot.git] / include / configs / o2mnt.h
1 /*
2  * (C) Copyright 2012
3  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * Valid values for CONFIG_SYS_TEXT_BASE are:
10  * 0xFF000000   boot low boot high (standard configuration)
11  * 0x00100000   boot from RAM (for testing only)
12  */
13 #ifndef CONFIG_SYS_TEXT_BASE
14 #define CONFIG_SYS_TEXT_BASE    0xff000000      /* Standard: boot low */
15 #endif
16
17 /* Board specific flash config */
18 #define CONFIG_SYS_FLASH_BASE           0xff000000
19 #define CONFIG_SYS_FLASH_SIZE           0x01000000      /* maximum 16MB */
20 /* max number of sectors on one chip */
21 #define CONFIG_SYS_MAX_FLASH_SECT       128
22
23 /*
24  * Include common defines for all ifm boards
25  */
26 #include "o2dnt-common.h"
27
28 /* GPIO configuration */
29 #define CONFIG_SYS_GPS_PORT_CONFIG      0x00002004      /* no CAN */
30
31 /* Other board specific configs */
32 #define CONFIG_NETCONSOLE
33
34 #define CONFIG_SYS_BOOTCS_CFG           0x00087801
35 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
36
37 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
38 #define CONFIG_SYS_MEMTEST_END          0x03f00000      /* 1 - 63 MB in DRAM  */
39
40 #define CONFIG_BOARD_NAME               "o2mnt"
41 #define CONFIG_BOARD_BOOTCMD            "${newcmd}"
42 #define CONFIG_BOARD_MEM_LIMIT          xstr(62)
43 #define BOARD_POST_CRC32_END            xstr(0x01000000)
44
45 #ifndef CONFIG_IFM_SENSOR_TYPE
46 #define CONFIG_IFM_SENSOR_TYPE          "O2M110"
47 #endif
48
49 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
50         CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
51         CONFIG_IFM_DEFAULT_ENV_OLD                                      \
52         CONFIG_IFM_DEFAULT_ENV_NEW                                      \
53         "linbot=ff060000\0"                                             \
54         "lintop=ff25ffff\0"                                             \
55         "rambot=ff260000\0"                                             \
56         "ramtop=ffc5ffff\0"                                             \
57         "jffbot=ffc60000\0"                                             \
58         "jfftop=ffffffff\0"                                             \
59         "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
60         "ubotop=ff03ffff\0"                                             \
61         "kernel_addr=0xff060000\0"                                      \
62         "ramdisk_addr=0xff260000\0"                                     \
63         "newcmd=run scrprot;run flash_ext2\0"                           \
64         "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} "  \
65                 "${ramtop}\0"                                           \
66         "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0"   \
67         "ext2args=setenv bootargs root=/dev/mtdblock3 ro "              \
68                 "rootfstype=ext2\0"                                     \
69         "pwm=mw f0000674 0x10006;mw f0000678 0x30000;"                  \
70                 "mw f0000678 0x30001;mw f0000670 0x3\0"                 \
71         "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);"           \
72                 "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0"       \
73         "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0"                          \
74         "srelease=0.00\0"