include/configs/o2dnt2.h

   1 /*
   2  * (C) Copyright 2012
   3  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * Valid values for CONFIG_SYS_TEXT_BASE are:
  10  * 0xFC000000   boot low boot high (standard configuration)
  11  * 0x00100000   boot from RAM (for testing only)
  12  */
  13 #ifndef CONFIG_SYS_TEXT_BASE
  14 #define CONFIG_SYS_TEXT_BASE    0xfc000000      /* Standard: boot low */
  15 #endif
  16
  17 /* Board specific flash config */
  18 #define CONFIG_SYS_FLASH_BASE           0xfc000000
  19 #define CONFIG_SYS_FLASH_SIZE           0x04000000      /* maximum 64MB */
  20 /* max number of sectors on one chip */
  21 #define CONFIG_SYS_MAX_FLASH_SECT       512
  22
  23 /*
  24  * Include common defines for all ifm boards
  25  */
  26 #include "o2dnt-common.h"
  27
  28 /* additional commands */
  29 #define CONFIG_CMD_ITEST
  30
  31 /*
  32  * GPIO configuration:
  33  * CS1 SDRAM activate + no CAN + no PCI
  34  */
  35 #define CONFIG_SYS_GPS_PORT_CONFIG      0x8000A004
  36
  37 /* Other board specific configs */
  38 #define CONFIG_SYS_BOOTCS_CFG           0x00057d01
  39 #define CONFIG_SYS_RESET_ADDRESS        0xfc000000
  40
  41 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
  42 #define CONFIG_SYS_MEMTEST_END          0x07f00000      /* 1 - 127 MB in DRAM */
  43
  44 #define CONFIG_BOARD_NAME               "o2dnt2"
  45 #define CONFIG_BOARD_BOOTCMD            "run flash_self"
  46 #define CONFIG_BOARD_MEM_LIMIT          xstr(126)
  47 #define BOARD_POST_CRC32_END            xstr(0x01000000)
  48
  49 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  50         CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
  51         CONFIG_IFM_DEFAULT_ENV_OLD                                      \
  52         CONFIG_IFM_DEFAULT_ENV_NEW                                      \
  53         "linbot=fc060000\0"                                             \
  54         "lintop=fc15ffff\0"                                             \
  55         "rambot=fc160000\0"                                             \
  56         "ramtop=fc55ffff\0"                                             \
  57         "jffbot=fc560000\0"                                             \
  58         "jfftop=fce5ffff\0"                                             \
  59         "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
  60         "ubotop=fc03ffff\0"                                             \
  61         "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0"    \
  62         "calbot=fce60000\0"                                             \
  63         "caltop=fcffffff\0"                                             \
  64         "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};"     \
  65                 "cp.b ${fileaddr} ${calbot} ${filesize}\0"              \
  66         "kernel_addr=0xfc060000\0"                                      \
  67         "ramdisk_addr=0xfc160000\0"                                     \
  68         "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"           \
  69                 "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"