sunxi: Add support for using MII phy-s with the GMAC nic
[oweals/u-boot.git] / include / configs / o2d.h
1 /*
2  * (C) Copyright 2012
3  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * Valid values for CONFIG_SYS_TEXT_BASE are:
10  * 0xFC000000   boot low boot high (standard configuration)
11  * 0x00100000   boot from RAM (for testing only)
12  */
13 #ifndef CONFIG_SYS_TEXT_BASE
14 #define CONFIG_SYS_TEXT_BASE    0xfc000000      /* Standard: boot low */
15 #endif
16
17 /* Board specific flash config */
18 #define CONFIG_SYS_FLASH_BASE           0xfc000000
19 #define CONFIG_SYS_FLASH_SIZE           0x04000000      /* maximum 64MB */
20 /* max number of sectors on one chip */
21 #define CONFIG_SYS_MAX_FLASH_SECT       512
22
23 /*
24  * Include common defines for all ifm boards
25  */
26 #include "o2dnt-common.h"
27
28 /* additional commands */
29 #define CONFIG_CMD_ITEST
30
31 /*
32  * GPIO configuration:
33  * CS1 SDRAM activate + no CAN + no PCI
34  */
35 #define CONFIG_SYS_GPS_PORT_CONFIG      0x8000A004
36
37 /* Other board specific configs */
38 #define CONFIG_SYS_BOOTCS_CFG           0x00057d01
39 #define CONFIG_SYS_RESET_ADDRESS        0xfc000000
40
41 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
42 #define CONFIG_SYS_MEMTEST_END          0x07f00000      /* 1 - 127 MB in DRAM */
43
44 #define CONFIG_BOARD_NAME               "o2d"
45 #define CONFIG_BOARD_BOOTCMD            "run dhcp_boot"
46 #define CONFIG_BOARD_MEM_LIMIT          xstr(126)
47 #define BOARD_POST_CRC32_END            xstr(0x01000000)
48
49 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
50         CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
51         CONFIG_IFM_DEFAULT_ENV_OLD                                      \
52         CONFIG_IFM_DEFAULT_ENV_NEW                                      \
53         "linbot=fc060000\0"                                             \
54         "lintop=fc15ffff\0"                                             \
55         "rambot=fc160000\0"                                             \
56         "ramtop=fc55ffff\0"                                             \
57         "jffbot=fc560000\0"                                             \
58         "jfftop=fcffffff\0"                                             \
59         "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
60         "ubotop=fc03ffff\0"                                             \
61         "kernel_addr=0xfc060000\0"                                      \
62         "ramdisk_addr=0xfc160000\0"                                     \
63         "progCram=tftp ${fileaddr} ${cramfsname};"                      \
64                 "erase ${rambot} ${ramtop};"                            \
65                 "cp.b ${fileaddr} ${rambot} ${filesize}\0"              \
66         "flash_for_configs=22396\0"                                     \
67         "flash_mtd=run mtd_args addip addmem;"                          \
68                 "bootm ${kernel_addr}\0"                                \
69         "mtd_args=setenv bootargs root=/dev/mtdblock3 "                 \
70                 "rw rootfstype=cramfs\0"                                \
71         "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"           \
72                 "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"               \
73         "dhcp_boot=run dhcpcmd;run flash_mtd\0"                         \
74         "hostname=IFM_SENSOR\0"                                         \
75         "netretry=once\0"                                               \
76         "autoload=no\0"                                                 \
77         "sensorType=O2D222AG\0"