ARM: configs: Add da850evm_nand to boot from NAND
[oweals/u-boot.git] / include / configs / novena.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Configuration settings for the Novena U-Boot.
4  *
5  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 /* System configurations */
12 #define CONFIG_KEYBOARD
13
14 #include "mx6_common.h"
15
16 /* U-Boot Commands */
17
18 /* U-Boot general configurations */
19
20 /* U-Boot environment */
21 #define CONFIG_ENV_SIZE                 (16 * 1024)
22 /*
23  * Environment is on MMC, starting at offset 512KiB from start of the card.
24  * Please place first partition at offset 1MiB from the start of the card
25  * as recommended by GNU/fdisk. See below for details:
26  * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
27  */
28 #ifdef CONFIG_CMD_MMC
29 #define CONFIG_SYS_MMC_ENV_DEV          0
30 #define CONFIG_ENV_OFFSET               (512 * 1024)
31 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
32 #define CONFIG_ENV_OFFSET_REDUND        \
33                 (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
34 #endif
35
36 /* Booting Linux */
37 #define CONFIG_BOOTFILE                 "fitImage"
38 #define CONFIG_HOSTNAME                 "novena"
39
40 /* Physical Memory Map */
41 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
42
43 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
44 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
45 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
46
47 #define CONFIG_SYS_INIT_SP_OFFSET \
48         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
49 #define CONFIG_SYS_INIT_SP_ADDR \
50         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
51
52 #define CONFIG_SYS_MEMTEST_START        0x10000000
53 #define CONFIG_SYS_MEMTEST_END          0x20000000
54
55 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
56
57 /* SPL */
58 #include "imx6_spl.h"                   /* common IMX6 SPL configuration */
59
60 /* Ethernet Configuration */
61 #ifdef CONFIG_CMD_NET
62 #define CONFIG_FEC_MXC
63 #define IMX_FEC_BASE                    ENET_BASE_ADDR
64 #define CONFIG_FEC_XCV_TYPE             RGMII
65 #define CONFIG_ETHPRIME                 "FEC"
66 #define CONFIG_FEC_MXC_PHYADDR          0x7
67 #define CONFIG_ARP_TIMEOUT              200UL
68 #endif
69
70 /* I2C */
71 #define CONFIG_SYS_I2C
72 #define CONFIG_SYS_I2C_MXC
73 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
74 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
75 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
76 #define CONFIG_I2C_MULTI_BUS
77 #define CONFIG_SYS_I2C_SPEED            100000
78 #define CONFIG_SYS_SPD_BUS_NUM          0
79
80 /* I2C EEPROM */
81 #ifdef CONFIG_CMD_EEPROM
82 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
83 #define CONFIG_SYS_I2C_EEPROM_BUS       2
84 #endif
85
86 /* MMC Configs */
87 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
88 #define CONFIG_SYS_FSL_USDHC_NUM        2
89
90 /* PCI express */
91 #ifdef CONFIG_CMD_PCI
92 #define CONFIG_PCI_SCAN_SHOW
93 #define CONFIG_PCIE_IMX
94 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(3, 29)
95 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(7, 12)
96 #endif
97
98 /* PMIC */
99 #define CONFIG_POWER
100 #define CONFIG_POWER_I2C
101 #define CONFIG_POWER_PFUZE100
102 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
103
104 /* SATA Configs */
105 #ifdef CONFIG_CMD_SATA
106 #define CONFIG_SYS_SATA_MAX_DEVICE      1
107 #define CONFIG_DWC_AHSATA_PORT_ID       0
108 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
109 #define CONFIG_LBA48
110 #endif
111
112 /* UART */
113 #define CONFIG_MXC_UART
114 #define CONFIG_MXC_UART_BASE            UART2_BASE
115
116 /* USB Configs */
117 #ifdef CONFIG_CMD_USB
118 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
119 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
120 #define CONFIG_MXC_USB_FLAGS            0
121 /* Gadget part */
122 #define CONFIG_USBD_HS
123 #define CONFIG_NETCONSOLE
124 #endif
125
126 /* Video output */
127 #ifdef CONFIG_VIDEO
128 #define CONFIG_VIDEO_IPUV3
129 #define CONFIG_VIDEO_BMP_RLE8
130 #define CONFIG_SPLASH_SCREEN
131 #define CONFIG_BMP_16BPP
132 #define CONFIG_VIDEO_LOGO
133 #define CONFIG_IMX_HDMI
134 #define CONFIG_IMX_VIDEO_SKIP
135 #endif
136
137 /* Extra U-Boot environment. */
138 #ifndef CONFIG_SPL_BUILD
139 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
140         "fdt_high=0xffffffff\0"                                         \
141         "initrd_high=0xffffffff\0"                                      \
142         "consdev=ttymxc1\0"                                             \
143         "baudrate=115200\0"                                             \
144         "bootdev=/dev/mmcblk0p1\0"                                      \
145         "rootdev=/dev/mmcblk0p2\0"                                      \
146         "netdev=eth0\0"                                                 \
147         "kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0"                \
148         "pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0"               \
149         "scriptaddr="__stringify(CONFIG_LOADADDR)"\0"                   \
150         "ramdisk_addr_r=0x28000000\0"                                   \
151         "fdt_addr_r=0x18000000\0"                                       \
152         "fdtfile=imx6q-novena.dtb\0"                                    \
153         "addcons="                                                      \
154                 "setenv bootargs ${bootargs} "                          \
155                 "console=${consdev},${baudrate}\0"                      \
156         "addip="                                                        \
157                 "setenv bootargs ${bootargs} "                          \
158                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
159                         "${netmask}:${hostname}:${netdev}:off\0"        \
160         "addmisc="                                                      \
161                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
162         "addargs=run addcons addmisc\0"                                 \
163         "mmcload="                                                      \
164                 "mmc rescan ; "                                         \
165                 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"       \
166         "netload="                                                      \
167                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
168         "miscargs=nohlt panic=1\0"                                      \
169         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
170         "nfsargs="                                                      \
171                 "setenv bootargs root=/dev/nfs rw "                     \
172                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
173         "mmc_mmc="                                                      \
174                 "run mmcload mmcargs addargs ; "                        \
175                 "bootm ${kernel_addr_r}\0"                              \
176         "mmc_nfs="                                                      \
177                 "run mmcload nfsargs addip addargs ; "                  \
178                 "bootm ${kernel_addr_r}\0"                              \
179         "net_mmc="                                                      \
180                 "run netload mmcargs addargs ; "                        \
181                 "bootm ${kernel_addr_r}\0"                              \
182         "net_nfs="                                                      \
183                 "run netload nfsargs addip addargs ; "                  \
184                 "bootm ${kernel_addr_r}\0"                              \
185         "update_sd_spl_filename=SPL\0"                                  \
186         "update_sd_uboot_filename=u-boot.img\0"                         \
187         "update_sd_firmware="   /* Update the SD firmware partition */  \
188                 "if mmc rescan ; then "                                 \
189                 "if dhcp ${update_sd_spl_filename} ; then "             \
190                 "mmc write ${loadaddr} 2 0x200 ; "                      \
191                 "fi ; "                                                 \
192                 "if dhcp ${update_sd_uboot_filename} ; then "           \
193                 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
194                 "fi ; "                                                 \
195                 "fi\0"                                                  \
196         BOOTENV
197
198 #define BOOT_TARGET_DEVICES(func) \
199         func(MMC, mmc, 0) \
200         func(USB, usb, 0) \
201         func(SATA, sata, 0) \
202         func(PXE, pxe, na) \
203         func(DHCP, dhcp, na)
204
205 #include <config_distro_bootcmd.h>
206
207 #else
208 #define CONFIG_EXTRA_ENV_SETTINGS
209 #endif /* CONFIG_SPL_BUILD */
210
211 #endif                          /* __CONFIG_H */