include/configs/nokia_rx51.h

   1 /*
   2  * (C) Copyright 2011-2012
   3  * Pali Rohár <pali.rohar@gmail.com>
   4  *
   5  * (C) Copyright 2010
   6  * Alistair Buxton <a.j.buxton@gmail.com>
   7  *
   8  * Derived from Beagle Board code:
   9  * (C) Copyright 2006-2008
  10  * Texas Instruments.
  11  * Richard Woodruff <r-woodruff2@ti.com>
  12  * Syed Mohammed Khasim <x0khasim@ti.com>
  13  *
  14  * Configuration settings for the Nokia RX-51 aka N900.
  15  *
  16  * SPDX-License-Identifier:     GPL-2.0+
  17  */
  18
  19 #ifndef __CONFIG_H
  20 #define __CONFIG_H
  21
  22 /*
  23  * High Level Configuration Options
  24  */
  25
  26 #define CONFIG_OMAP                     /* in a TI OMAP core */
  27 #define CONFIG_OMAP3430                 /* which is in a 3430 */
  28 #define CONFIG_OMAP3_RX51               /* working with RX51 */
  29 #define CONFIG_SYS_L2CACHE_OFF          /* pretend there is no L2 CACHE */
  30
  31 #define CONFIG_MACH_TYPE                MACH_TYPE_NOKIA_RX51
  32
  33 /*
  34  * Nokia X-Loader loading secondary image to address 0x80400000
  35  * NOLO loading boot image to random place, so it doesn't really
  36  * matter what we set this to. We have to copy u-boot to this address
  37  */
  38 #define CONFIG_SYS_TEXT_BASE    0x80008000
  39
  40 #define CONFIG_SDRC                     /* The chip has SDRC controller */
  41
  42 #include <asm/arch/cpu.h>               /* get chip and board defs */
  43 #include <asm/arch/omap.h>
  44 #include <asm/arch/mem.h>
  45 #include <linux/stringify.h>
  46
  47 /* Clock Defines */
  48 #define V_OSCK                  26000000        /* Clock output from T2 */
  49 #define V_SCLK                  (V_OSCK >> 1)
  50
  51 #undef CONFIG_USE_IRQ                           /* no support for IRQs */
  52 #define CONFIG_MISC_INIT_R
  53 #define CONFIG_SKIP_LOWLEVEL_INIT               /* X-Loader set everything up */
  54
  55 #define CONFIG_CMDLINE_TAG      /* enable passing kernel command line string */
  56 #define CONFIG_INITRD_TAG                       /* enable passing initrd */
  57 #define CONFIG_REVISION_TAG                     /* enable passing revision tag*/
  58 #define CONFIG_SETUP_MEMORY_TAGS                /* enable memory tag */
  59
  60 /*
  61  * Size of malloc() pool
  62  */
  63 #define CONFIG_ENV_SIZE                 (128 << 10)
  64 #define CONFIG_UBI_SIZE                 (512 << 10)
  65 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
  66                                         (128 << 10))
  67
  68 /*
  69  * Hardware drivers
  70  */
  71
  72 /*
  73  * NS16550 Configuration
  74  */
  75 #define V_NS16550_CLK           48000000                /* 48MHz (APLL96/2) */
  76
  77 #define CONFIG_SYS_NS16550_SERIAL
  78 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  79 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  80
  81 /*
  82  * select serial console configuration
  83  */
  84 #define CONFIG_CONS_INDEX               3
  85 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  86 #define CONFIG_SERIAL3                  3               /* UART3 on RX-51 */
  87
  88 /* allow to overwrite serial and ethaddr */
  89 #define CONFIG_ENV_OVERWRITE
  90 #define CONFIG_BAUDRATE                 115200
  91 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
  92
  93 /* USB */
  94 #define CONFIG_USB_MUSB_UDC
  95 #define CONFIG_USB_MUSB_HCD
  96 #define CONFIG_USB_OMAP3
  97 #define CONFIG_TWL4030_USB
  98
  99 /* USB device configuration */
 100 #define CONFIG_USB_DEVICE
 101 #define CONFIG_USBD_VENDORID            0x0421
 102 #define CONFIG_USBD_PRODUCTID           0x01c8
 103 #define CONFIG_USBD_MANUFACTURER        "Nokia"
 104 #define CONFIG_USBD_PRODUCT_NAME        "N900"
 105
 106 /* commands to include */
 107
 108 #define CONFIG_CMDLINE_EDITING          /* add command line history */
 109 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 110
 111 #define CONFIG_CMD_CLEAR                /* ANSI terminal clear screen command */
 112
 113 #ifdef ONENAND_SUPPORT
 114
 115 #define CONFIG_CMD_ONENAND              /* ONENAND support */
 116 #define CONFIG_CMD_MTDPARTS             /* mtd parts support */
 117
 118 #ifdef UBIFS_SUPPORT
 119 #define CONFIG_CMD_UBIFS                /* UBIFS Support */
 120 #endif
 121
 122 #endif
 123
 124 #define CONFIG_OMAP3_SPI
 125 #define CONFIG_SYS_I2C
 126 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 127 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 128 #define CONFIG_SYS_I2C_OMAP34XX
 129
 130 /*
 131  * TWL4030
 132  */
 133 #define CONFIG_TWL4030_POWER
 134 #define CONFIG_TWL4030_LED
 135 #define CONFIG_TWL4030_KEYPAD
 136
 137 #define CONFIG_OMAP_GPIO
 138 #define GPIO_SLIDE                      71
 139
 140 /*
 141  * Board ONENAND Info.
 142  */
 143
 144 #define PART1_NAME                      "bootloader"
 145 #define PART1_SIZE                      128
 146 #define PART1_MULL                      1024
 147 #define PART1_SUFF                      "k"
 148 #define PART1_OFFS                      0x00000000
 149 #define PART1_MASK                      0x00000003
 150
 151 #define PART2_NAME                      "config"
 152 #define PART2_SIZE                      384
 153 #define PART2_MULL                      1024
 154 #define PART2_SUFF                      "k"
 155 #define PART2_OFFS                      0x00020000
 156 #define PART2_MASK                      0x00000000
 157
 158 #define PART3_NAME                      "log"
 159 #define PART3_SIZE                      256
 160 #define PART3_MULL                      1024
 161 #define PART3_SUFF                      "k"
 162 #define PART3_OFFS                      0x00080000
 163 #define PART3_MASK                      0x00000000
 164
 165 #define PART4_NAME                      "kernel"
 166 #define PART4_SIZE                      2
 167 #define PART4_MULL                      1024*1024
 168 #define PART4_SUFF                      "m"
 169 #define PART4_OFFS                      0x000c0000
 170 #define PART4_MASK                      0x00000000
 171
 172 #define PART5_NAME                      "initfs"
 173 #define PART5_SIZE                      2
 174 #define PART5_MULL                      1024*1024
 175 #define PART5_SUFF                      "m"
 176 #define PART5_OFFS                      0x002c0000
 177 #define PART5_MASK                      0x00000000
 178
 179 #define PART6_NAME                      "rootfs"
 180 #define PART6_SIZE                      257280
 181 #define PART6_MULL                      1024
 182 #define PART6_SUFF                      "k"
 183 #define PART6_OFFS                      0x004c0000
 184 #define PART6_MASK                      0x00000000
 185
 186 #ifdef ONENAND_SUPPORT
 187
 188 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 189 #define CONFIG_MTD_DEVICE
 190 #define CONFIG_MTD_PARTITIONS
 191
 192 #ifdef UBIFS_SUPPORT
 193 #define CONFIG_RBTREE
 194 #define CONFIG_LZO
 195 #endif
 196
 197 #define MTDIDS_DEFAULT                  "onenand0=onenand"
 198 #define MTDPARTS_DEFAULT                "mtdparts=onenand:" \
 199                 __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
 200                 __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
 201                 __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
 202                 __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
 203                 __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
 204                 "-(" PART6_NAME ")"
 205
 206 #endif
 207
 208 /* Watchdog support */
 209 #define CONFIG_HW_WATCHDOG
 210
 211 /*
 212  * Framebuffer
 213  */
 214 /* Video console */
 215 #define CONFIG_VIDEO_LOGO
 216 #define VIDEO_FB_16BPP_PIXEL_SWAP
 217 #define VIDEO_FB_16BPP_WORD_SWAP
 218 #define CONFIG_SPLASH_SCREEN
 219
 220 /* functions for cfb_console */
 221 #define VIDEO_KBD_INIT_FCT              rx51_kp_init()
 222 #define VIDEO_TSTC_FCT                  rx51_kp_tstc
 223 #define VIDEO_GETC_FCT                  rx51_kp_getc
 224 #ifndef __ASSEMBLY__
 225 struct stdio_dev;
 226 int rx51_kp_init(void);
 227 int rx51_kp_tstc(struct stdio_dev *sdev);
 228 int rx51_kp_getc(struct stdio_dev *sdev);
 229 #endif
 230
 231 #ifndef MTDPARTS_DEFAULT
 232 #define MTDPARTS_DEFAULT
 233 #endif
 234
 235 /* Environment information */
 236 #define CONFIG_EXTRA_ENV_SETTINGS \
 237         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 238         "usbtty=cdc_acm\0" \
 239         "stdin=vga\0" \
 240         "stdout=vga\0" \
 241         "stderr=vga\0" \
 242         "setcon=setenv stdin ${con};" \
 243                 "setenv stdout ${con};" \
 244                 "setenv stderr ${con}\0" \
 245         "sercon=setenv con serial; run setcon\0" \
 246         "usbcon=setenv con usbtty; run setcon\0" \
 247         "vgacon=setenv con vga; run setcon\0" \
 248         "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
 249         "switchmmc=mmc dev ${mmcnum}\0" \
 250         "kernaddr=0x82008000\0" \
 251         "initrdaddr=0x84008000\0" \
 252         "scriptaddr=0x86008000\0" \
 253         "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
 254                 "${loadaddr} ${mmcfile}\0" \
 255         "kernload=setenv loadaddr ${kernaddr};" \
 256                 "setenv mmcfile ${mmckernfile};" \
 257                 "run fileload\0" \
 258         "initrdload=setenv loadaddr ${initrdaddr};" \
 259                 "setenv mmcfile ${mmcinitrdfile};" \
 260                 "run fileload\0" \
 261         "scriptload=setenv loadaddr ${scriptaddr};" \
 262                 "setenv mmcfile ${mmcscriptfile};" \
 263                 "run fileload\0" \
 264         "scriptboot=echo Running ${mmcscriptfile} from mmc " \
 265                 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
 266         "kernboot=echo Booting ${mmckernfile} from mmc " \
 267                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
 268         "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
 269                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
 270         "attachboot=echo Booting attached kernel image ...;" \
 271                 "setenv setup_omap_atag 1;" \
 272                 "bootm ${attkernaddr};" \
 273                 "setenv setup_omap_atag\0" \
 274         "trymmcscriptboot=if run switchmmc; then " \
 275                         "if run scriptload; then " \
 276                                 "run scriptboot;" \
 277                         "fi;" \
 278                 "fi\0" \
 279         "trymmckernboot=if run switchmmc; then " \
 280                         "if run kernload; then " \
 281                                 "run kernboot;" \
 282                         "fi;" \
 283                 "fi\0" \
 284         "trymmckerninitrdboot=if run switchmmc; then " \
 285                         "if run initrdload; then " \
 286                                 "if run kernload; then " \
 287                                         "run kerninitrdboot;" \
 288                                 "fi;" \
 289                         "fi; " \
 290                 "fi\0" \
 291         "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
 292                 "setenv mmckernfile uImage; run trymmckernboot\0" \
 293         "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
 294                 "setenv mmcpart 2; run trymmcpartboot;" \
 295                 "setenv mmcpart 3; run trymmcpartboot;" \
 296                 "setenv mmcpart 4; run trymmcpartboot\0" \
 297         "trymmcboot=if run switchmmc; then " \
 298                         "setenv mmctype fat;" \
 299                         "run trymmcallpartboot;" \
 300                         "setenv mmctype ext2;" \
 301                         "run trymmcallpartboot;" \
 302                         "setenv mmctype ext4;" \
 303                         "run trymmcallpartboot;" \
 304                 "fi\0" \
 305         "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
 306         "sdboot=setenv mmcnum 0; run trymmcboot\0" \
 307         "menucmd=bootmenu\0" \
 308         "bootmenu_0=Attached kernel=run attachboot\0" \
 309         "bootmenu_1=Internal eMMC=run emmcboot\0" \
 310         "bootmenu_2=External SD card=run sdboot\0" \
 311         "bootmenu_3=U-Boot boot order=boot\0" \
 312         "bootmenu_delay=30\0" \
 313         ""
 314
 315 #define CONFIG_PREBOOT \
 316         "setenv mmcnum 1; setenv mmcpart 1;" \
 317         "setenv mmcscriptfile bootmenu.scr;" \
 318         "if run switchmmc; then " \
 319                 "setenv mmcdone true;" \
 320                 "setenv mmctype fat;" \
 321                 "if run scriptload; then true; else " \
 322                         "setenv mmctype ext2;" \
 323                         "if run scriptload; then true; else " \
 324                                 "setenv mmctype ext4;" \
 325                                 "if run scriptload; then true; else " \
 326                                         "setenv mmcdone false;" \
 327                                 "fi;" \
 328                         "fi;" \
 329                 "fi;" \
 330                 "if ${mmcdone}; then " \
 331                         "run scriptboot;" \
 332                 "fi;" \
 333         "fi;" \
 334         "if run slide; then true; else " \
 335                 "setenv bootmenu_delay 0;" \
 336                 "setenv bootdelay 0;" \
 337         "fi"
 338
 339 #define CONFIG_POSTBOOTMENU \
 340         "echo;" \
 341         "echo Extra commands:;" \
 342         "echo run sercon - Use serial port for control.;" \
 343         "echo run usbcon - Use usbtty for control.;" \
 344         "echo run vgacon - Use framebuffer/keyboard.;" \
 345         "echo run sdboot - Boot from SD card slot.;" \
 346         "echo run emmcboot - Boot internal eMMC memory.;" \
 347         "echo run attachboot - Boot attached kernel image.;" \
 348         "echo"
 349
 350 #define CONFIG_BOOTCOMMAND \
 351         "run sdboot;" \
 352         "run emmcboot;" \
 353         "run attachboot;" \
 354         "echo"
 355
 356 #define CONFIG_MENU_SHOW
 357
 358 /*
 359  * Miscellaneous configurable options
 360  */
 361 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 362 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 363 /* Print Buffer Size */
 364 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 365                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
 366 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 367 /* Boot Argument Buffer Size */
 368 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 369
 370 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 371 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
 372
 373 /* default load address */
 374 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)
 375
 376 /*
 377  * OMAP3 has 12 GP timers, they can be driven by the system clock
 378  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 379  * This rate is divided by a local divisor.
 380  */
 381 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 382 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 383
 384 /*
 385  * Stack sizes
 386  *
 387  * The stack sizes are set up in start.S using the settings below
 388  */
 389 #define CONFIG_STACKSIZE                (128 << 10) /* regular stack 128 KiB */
 390
 391 /*
 392  * Physical Memory Map
 393  */
 394 #define CONFIG_NR_DRAM_BANKS            2
 395 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
 396
 397 /*
 398  * FLASH and environment organization
 399  */
 400
 401 #define CONFIG_ENV_IS_NOWHERE
 402
 403 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 404 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 405 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 406 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 407                         CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 408
 409 /*
 410  * Attached kernel image
 411  */
 412
 413 #define SDRAM_SIZE                      0x10000000      /* 256 MB */
 414 #define SDRAM_END                       (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
 415
 416 #define IMAGE_MAXSIZE                   0x1FF800        /* 2 MB - 2 kB */
 417 #define KERNEL_OFFSET                   0x40000         /* 256 kB */
 418 #define KERNEL_MAXSIZE                  (IMAGE_MAXSIZE-KERNEL_OFFSET)
 419 #define KERNEL_ADDRESS                  (SDRAM_END-KERNEL_MAXSIZE)
 420
 421 /* Reserve protected RAM for attached kernel */
 422 #define CONFIG_PRAM                     ((KERNEL_MAXSIZE >> 10)+1)
 423
 424 #endif /* __CONFIG_H */