sunxi: Add support for using MII phy-s with the GMAC nic
[oweals/u-boot.git] / include / configs / nokia_rx51.h
1 /*
2  * (C) Copyright 2011-2012
3  * Pali Rohár <pali.rohar@gmail.com>
4  *
5  * (C) Copyright 2010
6  * Alistair Buxton <a.j.buxton@gmail.com>
7  *
8  * Derived from Beagle Board code:
9  * (C) Copyright 2006-2008
10  * Texas Instruments.
11  * Richard Woodruff <r-woodruff2@ti.com>
12  * Syed Mohammed Khasim <x0khasim@ti.com>
13  *
14  * Configuration settings for the Nokia RX-51 aka N900.
15  *
16  * SPDX-License-Identifier:     GPL-2.0+
17  */
18
19 #ifndef __CONFIG_H
20 #define __CONFIG_H
21
22 /*
23  * High Level Configuration Options
24  */
25
26 #define CONFIG_OMAP                     /* in a TI OMAP core */
27 #define CONFIG_OMAP34XX                 /* which is a 34XX */
28 #define CONFIG_OMAP3430                 /* which is in a 3430 */
29 #define CONFIG_OMAP3_RX51               /* working with RX51 */
30 #define CONFIG_SYS_L2CACHE_OFF          /* pretend there is no L2 CACHE */
31 #define CONFIG_OMAP_COMMON
32
33 #define CONFIG_MACH_TYPE                MACH_TYPE_NOKIA_RX51
34
35 /*
36  * Nokia X-Loader loading secondary image to address 0x80400000
37  * NOLO loading boot image to random place, so it doesn't really
38  * matter what we set this to. We have to copy u-boot to this address
39  */
40 #define CONFIG_SYS_TEXT_BASE    0x80008000
41
42 #define CONFIG_SDRC                     /* The chip has SDRC controller */
43
44 #include <asm/arch/cpu.h>               /* get chip and board defs */
45 #include <asm/arch/omap3.h>
46 #include <asm/arch/mem.h>
47 #include <linux/stringify.h>
48
49 /*
50  * Display CPU and Board information
51  */
52 #define CONFIG_DISPLAY_CPUINFO
53 #define CONFIG_DISPLAY_BOARDINFO
54
55 /* Clock Defines */
56 #define V_OSCK                  26000000        /* Clock output from T2 */
57 #define V_SCLK                  (V_OSCK >> 1)
58
59 #undef CONFIG_USE_IRQ                           /* no support for IRQs */
60 #define CONFIG_MISC_INIT_R
61 #define CONFIG_SKIP_LOWLEVEL_INIT               /* X-Loader set everything up */
62
63 #define CONFIG_CMDLINE_TAG      /* enable passing kernel command line string */
64 #define CONFIG_INITRD_TAG                       /* enable passing initrd */
65 #define CONFIG_REVISION_TAG                     /* enable passing revision tag*/
66 #define CONFIG_SETUP_MEMORY_TAGS                /* enable memory tag */
67
68 /*
69  * Size of malloc() pool
70  */
71 #define CONFIG_ENV_SIZE                 (128 << 10)
72 #define CONFIG_UBI_SIZE                 (512 << 10)
73 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
74                                         (128 << 10))
75
76 /*
77  * Hardware drivers
78  */
79
80 /*
81  * NS16550 Configuration
82  */
83 #define V_NS16550_CLK           48000000                /* 48MHz (APLL96/2) */
84
85 #define CONFIG_SYS_NS16550
86 #define CONFIG_SYS_NS16550_SERIAL
87 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
88 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
89
90 /*
91  * select serial console configuration
92  */
93 #define CONFIG_CONS_INDEX               3
94 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
95 #define CONFIG_SERIAL3                  3               /* UART3 on RX-51 */
96
97 /* allow to overwrite serial and ethaddr */
98 #define CONFIG_ENV_OVERWRITE
99 #define CONFIG_BAUDRATE                 115200
100 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
101 #define CONFIG_MMC
102 #define CONFIG_GENERIC_MMC
103 #define CONFIG_OMAP_HSMMC
104 #define CONFIG_DOS_PARTITION
105
106 /* USB */
107 #define CONFIG_MUSB_UDC
108 #define CONFIG_MUSB_HDC
109 #define CONFIG_USB_OMAP3
110 #define CONFIG_TWL4030_USB
111
112 /* USB device configuration */
113 #define CONFIG_USB_DEVICE
114 #define CONFIG_USBD_VENDORID            0x0421
115 #define CONFIG_USBD_PRODUCTID           0x01c8
116 #define CONFIG_USBD_MANUFACTURER        "Nokia"
117 #define CONFIG_USBD_PRODUCT_NAME        "N900"
118
119 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
120 #define CONFIG_SYS_NO_FLASH
121
122 /* commands to include */
123 #include <config_cmd_default.h>
124
125 #define CONFIG_CMD_EXT2                 /* EXT2 Support */
126 #define CONFIG_CMD_EXT4                 /* EXT4 Support */
127 #define CONFIG_CMD_FAT                  /* FAT support */
128
129 #define CONFIG_CMD_I2C                  /* I2C serial bus support */
130 #define CONFIG_CMD_MMC                  /* MMC support */
131 #define CONFIG_CMD_GPIO                 /* Enable gpio command */
132
133 #define CONFIG_CMDLINE_EDITING          /* add command line history */
134 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
135
136 #define CONFIG_CMD_BOOTMENU             /* ANSI terminal Boot Menu */
137 #define CONFIG_CMD_CLEAR                /* ANSI terminal clear screen command */
138
139 #ifdef ONENAND_SUPPORT
140
141 #define CONFIG_CMD_ONENAND              /* ONENAND support */
142 #define CONFIG_CMD_MTDPARTS             /* mtd parts support */
143
144 #ifdef UBIFS_SUPPORT
145 #define CONFIG_CMD_UBI                  /* UBI Support */
146 #define CONFIG_CMD_UBIFS                /* UBIFS Support */
147 #endif
148
149 #endif
150
151 /* commands not needed from config_cmd_default.h */
152 #undef CONFIG_CMD_FPGA                  /* FPGA configuration Support */
153 #undef CONFIG_CMD_IMI                   /* iminfo */
154 #undef CONFIG_CMD_NET                   /* bootp, tftpboot, rarpboot */
155 #undef CONFIG_CMD_NFS                   /* NFS support */
156 #undef CONFIG_CMD_SAVEENV               /* saveenv */
157 #undef CONFIG_CMD_SETGETDCR             /* DCR support on 4xx */
158
159 #define CONFIG_OMAP3_SPI
160 #define CONFIG_SYS_I2C
161 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
162 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
163 #define CONFIG_SYS_I2C_OMAP34XX
164
165 /*
166  * TWL4030
167  */
168 #define CONFIG_TWL4030_POWER
169 #define CONFIG_TWL4030_LED
170 #define CONFIG_TWL4030_KEYPAD
171
172 #define CONFIG_OMAP_GPIO
173 #define GPIO_SLIDE                      71
174
175 /*
176  * Board ONENAND Info.
177  */
178
179 #define PART1_NAME                      "bootloader"
180 #define PART1_SIZE                      128
181 #define PART1_MULL                      1024
182 #define PART1_SUFF                      "k"
183 #define PART1_OFFS                      0x00000000
184 #define PART1_MASK                      0x00000003
185
186 #define PART2_NAME                      "config"
187 #define PART2_SIZE                      384
188 #define PART2_MULL                      1024
189 #define PART2_SUFF                      "k"
190 #define PART2_OFFS                      0x00020000
191 #define PART2_MASK                      0x00000000
192
193 #define PART3_NAME                      "log"
194 #define PART3_SIZE                      256
195 #define PART3_MULL                      1024
196 #define PART3_SUFF                      "k"
197 #define PART3_OFFS                      0x00080000
198 #define PART3_MASK                      0x00000000
199
200 #define PART4_NAME                      "kernel"
201 #define PART4_SIZE                      2
202 #define PART4_MULL                      1024*1024
203 #define PART4_SUFF                      "m"
204 #define PART4_OFFS                      0x000c0000
205 #define PART4_MASK                      0x00000000
206
207 #define PART5_NAME                      "initfs"
208 #define PART5_SIZE                      2
209 #define PART5_MULL                      1024*1024
210 #define PART5_SUFF                      "m"
211 #define PART5_OFFS                      0x002c0000
212 #define PART5_MASK                      0x00000000
213
214 #define PART6_NAME                      "rootfs"
215 #define PART6_SIZE                      257280
216 #define PART6_MULL                      1024
217 #define PART6_SUFF                      "k"
218 #define PART6_OFFS                      0x004c0000
219 #define PART6_MASK                      0x00000000
220
221 #ifdef ONENAND_SUPPORT
222
223 #define PISMO1_NAND_SIZE                GPMC_SIZE_128M
224 #define PISMO1_ONEN_SIZE                GPMC_SIZE_128M
225 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
226 #define CONFIG_MTD_DEVICE
227 #define CONFIG_MTD_PARTITIONS
228
229 #ifdef UBIFS_SUPPORT
230 #define CONFIG_RBTREE
231 #define CONFIG_LZO
232 #endif
233
234 #define MTDIDS_DEFAULT                  "onenand0=onenand"
235 #define MTDPARTS_DEFAULT                "mtdparts=onenand:" \
236                 __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
237                 __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
238                 __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
239                 __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
240                 __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
241                 "-(" PART6_NAME ")"
242
243 #endif
244
245 /* Watchdog support */
246 #define CONFIG_HW_WATCHDOG
247
248 /*
249  * Framebuffer
250  */
251 /* Video console */
252 #define CONFIG_VIDEO
253 #define CONFIG_CFB_CONSOLE
254 #define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */
255 #define CONFIG_VIDEO_LOGO
256 #define VIDEO_FB_16BPP_PIXEL_SWAP
257 #define VIDEO_FB_16BPP_WORD_SWAP
258 #define CONFIG_VIDEO_SW_CURSOR
259 #define CONFIG_SPLASH_SCREEN
260
261 /* functions for cfb_console */
262 #define VIDEO_KBD_INIT_FCT              rx51_kp_init()
263 #define VIDEO_TSTC_FCT                  rx51_kp_tstc
264 #define VIDEO_GETC_FCT                  rx51_kp_getc
265 #ifndef __ASSEMBLY__
266 int rx51_kp_init(void);
267 int rx51_kp_tstc(void);
268 int rx51_kp_getc(void);
269 #endif
270
271 #ifndef MTDPARTS_DEFAULT
272 #define MTDPARTS_DEFAULT
273 #endif
274
275 /* Environment information */
276 #define CONFIG_EXTRA_ENV_SETTINGS \
277         "mtdparts=" MTDPARTS_DEFAULT "\0" \
278         "usbtty=cdc_acm\0" \
279         "stdin=vga\0" \
280         "stdout=vga\0" \
281         "stderr=vga\0" \
282         "setcon=setenv stdin ${con};" \
283                 "setenv stdout ${con};" \
284                 "setenv stderr ${con}\0" \
285         "sercon=setenv con serial; run setcon\0" \
286         "usbcon=setenv con usbtty; run setcon\0" \
287         "vgacon=setenv con vga; run setcon\0" \
288         "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
289         "switchmmc=mmc dev ${mmcnum}\0" \
290         "kernaddr=0x82008000\0" \
291         "initrdaddr=0x84008000\0" \
292         "scriptaddr=0x86008000\0" \
293         "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
294                 "${loadaddr} ${mmcfile}\0" \
295         "kernload=setenv loadaddr ${kernaddr};" \
296                 "setenv mmcfile ${mmckernfile};" \
297                 "run fileload\0" \
298         "initrdload=setenv loadaddr ${initrdaddr};" \
299                 "setenv mmcfile ${mmcinitrdfile};" \
300                 "run fileload\0" \
301         "scriptload=setenv loadaddr ${scriptaddr};" \
302                 "setenv mmcfile ${mmcscriptfile};" \
303                 "run fileload\0" \
304         "scriptboot=echo Running ${mmcscriptfile} from mmc " \
305                 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
306         "kernboot=echo Booting ${mmckernfile} from mmc " \
307                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
308         "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
309                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
310         "attachboot=echo Booting attached kernel image ...;" \
311                 "setenv setup_omap_atag 1;" \
312                 "bootm ${attkernaddr};" \
313                 "setenv setup_omap_atag\0" \
314         "trymmcscriptboot=if run switchmmc; then " \
315                         "if run scriptload; then " \
316                                 "run scriptboot;" \
317                         "fi;" \
318                 "fi\0" \
319         "trymmckernboot=if run switchmmc; then " \
320                         "if run kernload; then " \
321                                 "run kernboot;" \
322                         "fi;" \
323                 "fi\0" \
324         "trymmckerninitrdboot=if run switchmmc; then " \
325                         "if run initrdload; then " \
326                                 "if run kernload; then " \
327                                         "run kerninitrdboot;" \
328                                 "fi;" \
329                         "fi; " \
330                 "fi\0" \
331         "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
332                 "setenv mmckernfile uImage; run trymmckernboot\0" \
333         "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
334                 "setenv mmcpart 2; run trymmcpartboot;" \
335                 "setenv mmcpart 3; run trymmcpartboot;" \
336                 "setenv mmcpart 4; run trymmcpartboot\0" \
337         "trymmcboot=if run switchmmc; then " \
338                         "setenv mmctype fat;" \
339                         "run trymmcallpartboot;" \
340                         "setenv mmctype ext2;" \
341                         "run trymmcallpartboot;" \
342                         "setenv mmctype ext4;" \
343                         "run trymmcallpartboot;" \
344                 "fi\0" \
345         "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
346         "sdboot=setenv mmcnum 0; run trymmcboot\0" \
347         "menucmd=bootmenu\0" \
348         "bootmenu_0=Attached kernel=run attachboot\0" \
349         "bootmenu_1=Internal eMMC=run emmcboot\0" \
350         "bootmenu_2=External SD card=run sdboot\0" \
351         "bootmenu_3=U-Boot boot order=boot\0" \
352         "bootmenu_delay=30\0" \
353         ""
354
355 #define CONFIG_PREBOOT \
356         "setenv mmcnum 1; setenv mmcpart 1;" \
357         "setenv mmcscriptfile bootmenu.scr;" \
358         "if run switchmmc; then " \
359                 "setenv mmcdone true;" \
360                 "setenv mmctype fat;" \
361                 "if run scriptload; then true; else " \
362                         "setenv mmctype ext2;" \
363                         "if run scriptload; then true; else " \
364                                 "setenv mmctype ext4;" \
365                                 "if run scriptload; then true; else " \
366                                         "setenv mmcdone false;" \
367                                 "fi;" \
368                         "fi;" \
369                 "fi;" \
370                 "if ${mmcdone}; then " \
371                         "run scriptboot;" \
372                 "fi;" \
373         "fi;" \
374         "if run slide; then true; else " \
375                 "setenv bootmenu_delay 0;" \
376                 "setenv bootdelay 0;" \
377         "fi"
378
379 #define CONFIG_POSTBOOTMENU \
380         "echo;" \
381         "echo Extra commands:;" \
382         "echo run sercon - Use serial port for control.;" \
383         "echo run usbcon - Use usbtty for control.;" \
384         "echo run vgacon - Use framebuffer/keyboard.;" \
385         "echo run sdboot - Boot from SD card slot.;" \
386         "echo run emmcboot - Boot internal eMMC memory.;" \
387         "echo run attachboot - Boot attached kernel image.;" \
388         "echo"
389
390 #define CONFIG_BOOTCOMMAND \
391         "run sdboot;" \
392         "run emmcboot;" \
393         "run attachboot;" \
394         "echo"
395
396 #define CONFIG_BOOTDELAY 30
397 #define CONFIG_AUTOBOOT_KEYED
398 #define CONFIG_MENU
399 #define CONFIG_MENU_SHOW
400
401 /*
402  * Miscellaneous configurable options
403  */
404 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
405 #define CONFIG_SYS_HUSH_PARSER                  /* use "hush" command parser */
406 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
407 #define CONFIG_SYS_PROMPT               "Nokia RX-51 # "
408 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
409 /* Print Buffer Size */
410 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
411                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
412 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
413 /* Boot Argument Buffer Size */
414 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
415
416 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
417 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
418
419 /* default load address */
420 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)
421
422 /*
423  * OMAP3 has 12 GP timers, they can be driven by the system clock
424  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
425  * This rate is divided by a local divisor.
426  */
427 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
428 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
429
430 /*
431  * Stack sizes
432  *
433  * The stack sizes are set up in start.S using the settings below
434  */
435 #define CONFIG_STACKSIZE                (128 << 10) /* regular stack 128 KiB */
436
437 /*
438  * Physical Memory Map
439  */
440 #define CONFIG_NR_DRAM_BANKS            2
441 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
442
443 /*
444  * FLASH and environment organization
445  */
446
447 #define CONFIG_ENV_IS_NOWHERE
448
449 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
450 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
451 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
452 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
453                         CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
454
455 /*
456  * Attached kernel image
457  */
458
459 #define SDRAM_SIZE                      0x10000000      /* 256 MB */
460 #define SDRAM_END                       (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
461
462 #define IMAGE_MAXSIZE                   0x1FF800        /* 2 MB - 2 kB */
463 #define KERNEL_OFFSET                   0x40000         /* 256 kB */
464 #define KERNEL_MAXSIZE                  (IMAGE_MAXSIZE-KERNEL_OFFSET)
465 #define KERNEL_ADDRESS                  (SDRAM_END-KERNEL_MAXSIZE)
466
467 /* Reserve protected RAM for attached kernel */
468 #define CONFIG_PRAM                     ((KERNEL_MAXSIZE >> 10)+1)
469
470 #endif /* __CONFIG_H */