include/configs/mx6ul_14x14_evk.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __MX6UL_14X14_EVK_CONFIG_H
   9 #define __MX6UL_14X14_EVK_CONFIG_H
  10
  11 #include <asm/arch/imx-regs.h>
  12 #include <linux/sizes.h>
  13 #include "mx6_common.h"
  14 #include <asm/imx-common/gpio.h>
  15
  16 #define is_mx6ul_9x9_evk()      CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
  17
  18 /* SPL options */
  19 #include "imx6_spl.h"
  20
  21 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  22
  23 #define CONFIG_DISPLAY_BOARDINFO
  24
  25 /* Size of malloc() pool */
  26 #define CONFIG_SYS_MALLOC_LEN           (16 * SZ_1M)
  27
  28 #define CONFIG_BOARD_EARLY_INIT_F
  29 #define CONFIG_BOARD_LATE_INIT
  30
  31 #define CONFIG_MXC_UART
  32 #define CONFIG_MXC_UART_BASE            UART1_BASE
  33
  34 /* MMC Configs */
  35 #ifdef CONFIG_FSL_USDHC
  36 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  37
  38 /* NAND pin conflicts with usdhc2 */
  39 #ifdef CONFIG_NAND_MXS
  40 #define CONFIG_SYS_FSL_USDHC_NUM        1
  41 #else
  42 #define CONFIG_SYS_FSL_USDHC_NUM        2
  43 #endif
  44
  45 #endif
  46
  47 /* I2C configs */
  48 #ifdef CONFIG_CMD_I2C
  49 #define CONFIG_SYS_I2C
  50 #define CONFIG_SYS_I2C_MXC
  51 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  52 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  53 #define CONFIG_SYS_I2C_SPEED            100000
  54
  55 /* PMIC only for 9X9 EVK */
  56 #define CONFIG_POWER
  57 #define CONFIG_POWER_I2C
  58 #define CONFIG_POWER_PFUZE3000
  59 #define CONFIG_POWER_PFUZE3000_I2C_ADDR  0x08
  60 #endif
  61
  62 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  63
  64 #define CONFIG_EXTRA_ENV_SETTINGS \
  65         "script=boot.scr\0" \
  66         "image=zImage\0" \
  67         "console=ttymxc0\0" \
  68         "fdt_high=0xffffffff\0" \
  69         "initrd_high=0xffffffff\0" \
  70         "fdt_file=undefined\0" \
  71         "fdt_addr=0x83000000\0" \
  72         "boot_fdt=try\0" \
  73         "ip_dyn=yes\0" \
  74         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  75         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  76         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  77         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  78         "mmcautodetect=yes\0" \
  79         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  80                 "root=${mmcroot}\0" \
  81         "loadbootscript=" \
  82                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  83         "bootscript=echo Running bootscript from mmc ...; " \
  84                 "source\0" \
  85         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  86         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  87         "mmcboot=echo Booting from mmc ...; " \
  88                 "run mmcargs; " \
  89                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  90                         "if run loadfdt; then " \
  91                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  92                         "else " \
  93                                 "if test ${boot_fdt} = try; then " \
  94                                         "bootz; " \
  95                                 "else " \
  96                                         "echo WARN: Cannot load the DT; " \
  97                                 "fi; " \
  98                         "fi; " \
  99                 "else " \
 100                         "bootz; " \
 101                 "fi;\0" \
 102         "netargs=setenv bootargs console=${console},${baudrate} " \
 103                 "root=/dev/nfs " \
 104         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 105                 "netboot=echo Booting from net ...; " \
 106                 "run netargs; " \
 107                 "if test ${ip_dyn} = yes; then " \
 108                         "setenv get_cmd dhcp; " \
 109                 "else " \
 110                         "setenv get_cmd tftp; " \
 111                 "fi; " \
 112                 "${get_cmd} ${image}; " \
 113                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 114                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 115                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 116                         "else " \
 117                                 "if test ${boot_fdt} = try; then " \
 118                                         "bootz; " \
 119                                 "else " \
 120                                         "echo WARN: Cannot load the DT; " \
 121                                 "fi; " \
 122                         "fi; " \
 123                 "else " \
 124                         "bootz; " \
 125                 "fi;\0" \
 126                 "findfdt="\
 127                         "if test $fdt_file = undefined; then " \
 128                                 "if test $board_name = EVK && test $board_rev = 9X9; then " \
 129                                         "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
 130                                 "if test $board_name = EVK && test $board_rev = 14X14; then " \
 131                                         "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
 132                                 "if test $fdt_file = undefined; then " \
 133                                         "echo WARNING: Could not determine dtb to use; fi; " \
 134                         "fi;\0" \
 135
 136 #define CONFIG_BOOTCOMMAND \
 137            "run findfdt;" \
 138            "mmc dev ${mmcdev};" \
 139            "mmc dev ${mmcdev}; if mmc rescan; then " \
 140                    "if run loadbootscript; then " \
 141                            "run bootscript; " \
 142                    "else " \
 143                            "if run loadimage; then " \
 144                                    "run mmcboot; " \
 145                            "else run netboot; " \
 146                            "fi; " \
 147                    "fi; " \
 148            "else run netboot; fi"
 149
 150 /* Miscellaneous configurable options */
 151 #define CONFIG_SYS_MEMTEST_START        0x80000000
 152 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x8000000)
 153
 154 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 155 #define CONFIG_SYS_HZ                   1000
 156
 157 #define CONFIG_CMDLINE_EDITING
 158 #define CONFIG_STACKSIZE                SZ_128K
 159
 160 /* Physical Memory Map */
 161 #define CONFIG_NR_DRAM_BANKS            1
 162 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 163
 164 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 165 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 166 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 167
 168 #define CONFIG_SYS_INIT_SP_OFFSET \
 169         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 170 #define CONFIG_SYS_INIT_SP_ADDR \
 171         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 172
 173 /* FLASH and environment organization */
 174 #define CONFIG_SYS_NO_FLASH
 175
 176 #define CONFIG_ENV_SIZE                 SZ_8K
 177 #define CONFIG_ENV_IS_IN_MMC
 178 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 179 #define CONFIG_SYS_MMC_ENV_DEV          1   /* USDHC2 */
 180 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 181 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 182
 183 #define CONFIG_CMD_BMODE
 184
 185 #ifndef CONFIG_SYS_DCACHE_OFF
 186 #endif
 187
 188 #ifdef CONFIG_FSL_QSPI
 189 #define CONFIG_SF_DEFAULT_BUS           0
 190 #define CONFIG_SF_DEFAULT_CS            0
 191 #define CONFIG_SF_DEFAULT_SPEED 40000000
 192 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 193 #define FSL_QSPI_FLASH_NUM              1
 194 #define FSL_QSPI_FLASH_SIZE             SZ_32M
 195 #endif
 196
 197 /* USB Configs */
 198 #ifdef CONFIG_CMD_USB
 199 #define CONFIG_USB_EHCI
 200 #define CONFIG_USB_EHCI_MX6
 201 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 202 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 203 #define CONFIG_MXC_USB_FLAGS   0
 204 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 205 #endif
 206
 207 #ifdef CONFIG_CMD_NET
 208 #define CONFIG_FEC_MXC
 209 #define CONFIG_MII
 210 #define CONFIG_FEC_ENET_DEV             1
 211
 212 #if (CONFIG_FEC_ENET_DEV == 0)
 213 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 214 #define CONFIG_FEC_MXC_PHYADDR          0x2
 215 #define CONFIG_FEC_XCV_TYPE             RMII
 216 #elif (CONFIG_FEC_ENET_DEV == 1)
 217 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
 218 #define CONFIG_FEC_MXC_PHYADDR          0x1
 219 #define CONFIG_FEC_XCV_TYPE             RMII
 220 #endif
 221 #define CONFIG_ETHPRIME                 "FEC"
 222
 223 #define CONFIG_PHYLIB
 224 #define CONFIG_PHY_MICREL
 225 #endif
 226
 227 #define CONFIG_IMX_THERMAL
 228
 229 #ifndef CONFIG_SPL_BUILD
 230 #define CONFIG_VIDEO
 231 #ifdef CONFIG_VIDEO
 232 #define CONFIG_CFB_CONSOLE
 233 #define CONFIG_VIDEO_MXS
 234 #define CONFIG_VIDEO_LOGO
 235 #define CONFIG_VIDEO_SW_CURSOR
 236 #define CONFIG_VGA_AS_SINGLE_DEVICE
 237 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 238 #define CONFIG_SPLASH_SCREEN
 239 #define CONFIG_SPLASH_SCREEN_ALIGN
 240 #define CONFIG_CMD_BMP
 241 #define CONFIG_BMP_16BPP
 242 #define CONFIG_VIDEO_BMP_RLE8
 243 #define CONFIG_VIDEO_BMP_LOGO
 244 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 245 #endif
 246 #endif
 247
 248 #endif