ARM: configs: Add da850evm_nand to boot from NAND
[oweals/u-boot.git] / include / configs / mx6sxsabresd.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2014 Freescale Semiconductor, Inc.
4  *
5  * Configuration settings for the Freescale i.MX6SX Sabresd board.
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include "mx6_common.h"
12
13 #ifdef CONFIG_SPL
14 #include "imx6_spl.h"
15 #endif
16
17 /* Size of malloc() pool */
18 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
19
20 #define CONFIG_MXC_UART
21 #define CONFIG_MXC_UART_BASE            UART1_BASE
22
23 #ifdef CONFIG_IMX_BOOTAUX
24 /* Set to QSPI2 B flash at default */
25 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x78000000
26
27 #define UPDATE_M4_ENV \
28         "m4image=m4_qspi.bin\0" \
29         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
30         "update_m4_from_sd=" \
31                 "if sf probe 1:0; then " \
32                         "if run loadm4image; then " \
33                                 "setexpr fw_sz ${filesize} + 0xffff; " \
34                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
35                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
36                                 "sf erase 0x0 ${fw_sz}; " \
37                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
38                         "fi; " \
39                 "fi\0" \
40         "m4boot=sf probe 1:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
41 #else
42 #define UPDATE_M4_ENV ""
43 #endif
44
45 #define CONFIG_EXTRA_ENV_SETTINGS \
46         UPDATE_M4_ENV \
47         "script=boot.scr\0" \
48         "image=zImage\0" \
49         "console=ttymxc0\0" \
50         "fdt_high=0xffffffff\0" \
51         "initrd_high=0xffffffff\0" \
52         "fdt_file=imx6sx-sdb.dtb\0" \
53         "fdt_addr=0x88000000\0" \
54         "boot_fdt=try\0" \
55         "ip_dyn=yes\0" \
56         "videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \
57         "mmcdev=2\0" \
58         "mmcpart=1\0" \
59         "finduuid=part uuid mmc 2:2 uuid\0" \
60         "mmcargs=setenv bootargs console=${console},${baudrate} " \
61                 "root=PARTUUID=${uuid} rootwait rw\0" \
62         "loadbootscript=" \
63                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
64         "bootscript=echo Running bootscript from mmc ...; " \
65                 "source\0" \
66         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
67         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
68         "mmcboot=echo Booting from mmc ...; " \
69                 "run finduuid; " \
70                 "run mmcargs; " \
71                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
72                         "if run loadfdt; then " \
73                                 "bootz ${loadaddr} - ${fdt_addr}; " \
74                         "else " \
75                                 "if test ${boot_fdt} = try; then " \
76                                         "bootz; " \
77                                 "else " \
78                                         "echo WARN: Cannot load the DT; " \
79                                 "fi; " \
80                         "fi; " \
81                 "else " \
82                         "bootz; " \
83                 "fi;\0" \
84         "netargs=setenv bootargs console=${console},${baudrate} " \
85                 "root=/dev/nfs " \
86         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
87                 "netboot=echo Booting from net ...; " \
88                 "run netargs; " \
89                 "if test ${ip_dyn} = yes; then " \
90                         "setenv get_cmd dhcp; " \
91                 "else " \
92                         "setenv get_cmd tftp; " \
93                 "fi; " \
94                 "${get_cmd} ${image}; " \
95                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
96                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
97                                 "bootz ${loadaddr} - ${fdt_addr}; " \
98                         "else " \
99                                 "if test ${boot_fdt} = try; then " \
100                                         "bootz; " \
101                                 "else " \
102                                         "echo WARN: Cannot load the DT; " \
103                                 "fi; " \
104                         "fi; " \
105                 "else " \
106                         "bootz; " \
107                 "fi;\0" \
108         "findfdt="\
109                 "if test test $board_rev = REVA ; then " \
110                         "setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \
111
112 #define CONFIG_BOOTCOMMAND \
113            "run findfdt; " \
114            "mmc dev ${mmcdev}; if mmc rescan; then " \
115                    "if run loadbootscript; then " \
116                            "run bootscript; " \
117                    "else " \
118                            "if run loadimage; then " \
119                                    "run mmcboot; " \
120                            "else run netboot; " \
121                            "fi; " \
122                    "fi; " \
123            "else run netboot; fi"
124
125 /* Miscellaneous configurable options */
126 #define CONFIG_SYS_MEMTEST_START        0x80000000
127 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x10000)
128
129 /* Physical Memory Map */
130 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
131
132 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
133 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
134 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
135
136 #define CONFIG_SYS_INIT_SP_OFFSET \
137         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
138 #define CONFIG_SYS_INIT_SP_ADDR \
139         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
140
141 /* MMC Configuration */
142 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
143
144 /* I2C Configs */
145 #define CONFIG_SYS_I2C_MXC
146 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
147 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
148 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
149 #define CONFIG_SYS_I2C_SPEED              100000
150
151 /* Network */
152 #define CONFIG_FEC_MXC
153
154 #define IMX_FEC_BASE                    ENET_BASE_ADDR
155 #define CONFIG_FEC_MXC_PHYADDR          0x1
156
157 #define CONFIG_FEC_XCV_TYPE             RGMII
158 #define CONFIG_ETHPRIME                 "FEC"
159
160 #define CONFIG_PHY_ATHEROS
161
162 #ifdef CONFIG_CMD_USB
163 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
164 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
165 #define CONFIG_MXC_USB_FLAGS   0
166 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
167 #endif
168
169 #ifdef CONFIG_CMD_PCI
170 #define CONFIG_PCI_SCAN_SHOW
171 #define CONFIG_PCIE_IMX
172 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(2, 0)
173 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(2, 1)
174 #endif
175
176 #define CONFIG_IMX_THERMAL
177
178 #ifdef CONFIG_FSL_QSPI
179 #define CONFIG_SYS_FSL_QSPI_LE
180 #define CONFIG_SYS_FSL_QSPI_AHB
181 #ifdef CONFIG_MX6SX_SABRESD_REVA
182 #define FSL_QSPI_FLASH_SIZE             SZ_16M
183 #else
184 #define FSL_QSPI_FLASH_SIZE             SZ_32M
185 #endif
186 #define FSL_QSPI_FLASH_NUM              2
187 #define CONFIG_SF_DEFAULT_BUS           1
188 #define CONFIG_SF_DEFAULT_CS            0
189 #define CONFIG_SF_DEFAULT_SPEED 40000000
190 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
191 #endif
192
193 #ifndef CONFIG_SPL_BUILD
194 #ifdef CONFIG_VIDEO
195 #define CONFIG_VIDEO_MXS
196 #define CONFIG_VIDEO_LOGO
197 #define CONFIG_SPLASH_SCREEN
198 #define CONFIG_SPLASH_SCREEN_ALIGN
199 #define CONFIG_BMP_16BPP
200 #define CONFIG_VIDEO_BMP_RLE8
201 #define CONFIG_VIDEO_BMP_LOGO
202 #define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR
203 #endif
204 #endif
205
206 #define CONFIG_ENV_OFFSET               (14 * SZ_64K)
207 #define CONFIG_ENV_SIZE                 SZ_8K
208
209 #define CONFIG_SYS_FSL_USDHC_NUM        3
210 #if defined(CONFIG_ENV_IS_IN_MMC)
211 #define CONFIG_SYS_MMC_ENV_DEV          2  /*USDHC4*/
212 #endif
213
214 #endif                          /* __CONFIG_H */