include/configs/mx6cuboxi.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the SolidRun mx6 based boards
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __MX6CUBOXI_CONFIG_H
   9 #define __MX6CUBOXI_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  14 #define CONFIG_SPL_MMC_SUPPORT
  15 #include "imx6_spl.h"
  16
  17 #define CONFIG_IMX6_THERMAL
  18
  19 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21 #define CONFIG_BOARD_LATE_INIT
  22 #define CONFIG_MXC_GPIO
  23 #define CONFIG_MXC_UART
  24 #define CONFIG_CMD_FUSE
  25 #define CONFIG_MXC_OCOTP
  26
  27 /* MMC Configs */
  28 #define CONFIG_FSL_ESDHC
  29 #define CONFIG_FSL_USDHC
  30 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  31 #define CONFIG_MMC
  32 #define CONFIG_CMD_MMC
  33 #define CONFIG_GENERIC_MMC
  34 #define CONFIG_BOUNCE_BUFFER
  35 #define CONFIG_CMD_EXT4
  36 #define CONFIG_CMD_EXT4_WRITE
  37 #define CONFIG_CMD_FAT
  38 #define CONFIG_DOS_PARTITION
  39
  40 /* Ethernet Configuration */
  41 #define CONFIG_FEC_MXC
  42 #define CONFIG_CMD_PING
  43 #define CONFIG_CMD_DHCP
  44 #define CONFIG_CMD_MII
  45 #define CONFIG_CMD_NET
  46 #define CONFIG_MII
  47 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  48 #define CONFIG_FEC_XCV_TYPE             RGMII
  49 #define CONFIG_FEC_MXC_PHYADDR          0
  50 #define CONFIG_PHYLIB
  51 #define CONFIG_PHY_ATHEROS
  52
  53 /* allow to overwrite serial and ethaddr */
  54 #define CONFIG_ENV_OVERWRITE
  55 #define CONFIG_CONS_INDEX               1
  56 #define CONFIG_BAUDRATE                 115200
  57
  58 /* Framebuffer */
  59 #define CONFIG_VIDEO
  60 #define CONFIG_VIDEO_IPUV3
  61 #define CONFIG_IPUV3_CLK                260000000
  62 #define CONFIG_CFB_CONSOLE
  63 #define CONFIG_VGA_AS_SINGLE_DEVICE
  64 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  65 #define CONFIG_VIDEO_BMP_RLE8
  66 #define CONFIG_SPLASH_SCREEN
  67 #define CONFIG_SPLASH_SCREEN_ALIGN
  68 #define CONFIG_BMP_16BPP
  69 #define CONFIG_VIDEO_LOGO
  70 #define CONFIG_VIDEO_BMP_LOGO
  71 #define CONFIG_IMX_HDMI
  72 #define CONFIG_CMD_HDMIDETECT
  73 #define CONFIG_IMX_VIDEO_SKIP
  74 #define CONFIG_CONSOLE_MUX
  75
  76 /* USB */
  77 #define CONFIG_CMD_USB
  78 #define CONFIG_USB_EHCI
  79 #define CONFIG_USB_EHCI_MX6
  80 #define CONFIG_USB_STORAGE
  81 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  82 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  83 #define CONFIG_MXC_USB_FLAGS            0
  84 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  85 #define CONFIG_USB_KEYBOARD
  86 #define CONFIG_SYS_USB_EVENT_POLL
  87 #define CONFIG_PREBOOT \
  88         "if hdmidet; then " \
  89                 "usb start; "                  \
  90                 "setenv stdin  serial,usbkbd; "\
  91                 "setenv stdout serial,vga; "   \
  92                 "setenv stderr serial,vga; "   \
  93         "else " \
  94                 "setenv stdin  serial; " \
  95                 "setenv stdout serial; " \
  96                 "setenv stderr serial; " \
  97         "fi;"
  98
  99 /* Command definition */
 100 #define CONFIG_CMD_BOOTZ
 101 #define CONFIG_CMD_SETEXPR
 102
 103 #define CONFIG_BOOTDELAY                1
 104
 105 #define CONFIG_LOADADDR                 0x12000000
 106 #define CONFIG_SYS_TEXT_BASE            0x17800000
 107
 108 #define CONFIG_MXC_UART_BASE    UART1_BASE
 109 #define CONFIG_CONSOLE_DEV      "ttymxc0"
 110 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
 111 #define CONFIG_SYS_FSL_USDHC_NUM        1
 112 #define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
 113
 114 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 115 #define CONFIG_EXTRA_ENV_SETTINGS \
 116         "script=boot.scr\0" \
 117         "image=zImage\0" \
 118         "fdtfile=undefined\0" \
 119         "fdt_addr_r=0x18000000\0" \
 120         "boot_fdt=try\0" \
 121         "ip_dyn=yes\0" \
 122         "console=" CONFIG_CONSOLE_DEV "\0" \
 123         "bootm_size=0x10000000\0" \
 124         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 125         "mmcpart=1\0" \
 126         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 127         "update_sd_firmware=" \
 128                 "if test ${ip_dyn} = yes; then " \
 129                         "setenv get_cmd dhcp; " \
 130                 "else " \
 131                         "setenv get_cmd tftp; " \
 132                 "fi; " \
 133                 "if mmc dev ${mmcdev}; then "   \
 134                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 135                                 "setexpr fw_sz ${filesize} / 0x200; " \
 136                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 137                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 138                         "fi; "  \
 139                 "fi\0" \
 140         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 141                 "root=${mmcroot}\0" \
 142         "loadbootscript=" \
 143                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 144         "bootscript=echo Running bootscript from mmc ...; " \
 145                 "source\0" \
 146         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 147         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 148         "mmcboot=echo Booting from mmc ...; " \
 149                 "run mmcargs; " \
 150                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 151                         "if run loadfdt; then " \
 152                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 153                         "else " \
 154                                 "if test ${boot_fdt} = try; then " \
 155                                         "bootz; " \
 156                                 "else " \
 157                                         "echo WARN: Cannot load the DT; " \
 158                                 "fi; " \
 159                         "fi; " \
 160                 "else " \
 161                         "bootz; " \
 162                 "fi;\0" \
 163         "netargs=setenv bootargs console=${console},${baudrate} " \
 164                 "root=/dev/nfs " \
 165                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 166         "netboot=echo Booting from net ...; " \
 167                 "run netargs; " \
 168                 "if test ${ip_dyn} = yes; then " \
 169                         "setenv get_cmd dhcp; " \
 170                 "else " \
 171                         "setenv get_cmd tftp; " \
 172                 "fi; " \
 173                 "${get_cmd} ${image}; " \
 174                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 175                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 176                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 177                         "else " \
 178                                 "if test ${boot_fdt} = try; then " \
 179                                         "bootz; " \
 180                                 "else " \
 181                                         "echo WARN: Cannot load the DT; " \
 182                                 "fi; " \
 183                         "fi; " \
 184                 "else " \
 185                         "bootz; " \
 186                 "fi;\0" \
 187         "findfdt="\
 188                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
 189                         "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
 190                 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
 191                         "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
 192                 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
 193                         "setenv fdtfile imx6q-cubox-i.dtb; fi; " \
 194                 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
 195                         "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
 196                 "if test $fdtfile = undefined; then " \
 197                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 198
 199 #define CONFIG_BOOTCOMMAND \
 200         "run findfdt; " \
 201         "mmc dev ${mmcdev};" \
 202         "if mmc rescan; then " \
 203                 "if run loadbootscript; then " \
 204                 "run bootscript; " \
 205                 "else " \
 206                         "if run loadimage; then " \
 207                                 "run mmcboot; " \
 208                         "else run netboot; " \
 209                         "fi; " \
 210                 "fi; " \
 211         "else run netboot; fi"
 212
 213 /* Miscellaneous configurable options */
 214 #define CONFIG_SYS_LONGHELP
 215 #define CONFIG_SYS_HUSH_PARSER
 216 #define CONFIG_AUTO_COMPLETE
 217 #define CONFIG_SYS_CBSIZE              256
 218 #define CONFIG_SYS_MAXARGS             16
 219 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 220
 221 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 222
 223 #define CONFIG_CMDLINE_EDITING
 224
 225 /* Physical Memory Map */
 226 #define CONFIG_NR_DRAM_BANKS           1
 227 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 228 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 229 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 230
 231 #define CONFIG_SYS_INIT_SP_OFFSET \
 232         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 233 #define CONFIG_SYS_INIT_SP_ADDR \
 234         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 235
 236 /* Environment organization */
 237 #define CONFIG_ENV_SIZE                 (8 * 1024)
 238 #define CONFIG_ENV_IS_IN_MMC
 239 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 240
 241 #define CONFIG_OF_LIBFDT
 242 #define CONFIG_CMD_CACHE
 243
 244 #endif                         /* __MX6CUBOXI_CONFIG_H */