sunxi: Add support for using MII phy-s with the GMAC nic
[oweals/u-boot.git] / include / configs / mx53loco.h
1 /*
2  * Copyright (C) 2011 Freescale Semiconductor, Inc.
3  * Jason Liu <r64343@freescale.com>
4  *
5  * Configuration settings for Freescale MX53 low cost board.
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_MX53
14
15 #define CONFIG_DISPLAY_BOARDINFO
16
17 #define CONFIG_MACH_TYPE        MACH_TYPE_MX53_LOCO
18
19 #include <asm/arch/imx-regs.h>
20
21 #define CONFIG_CMDLINE_TAG
22 #define CONFIG_SETUP_MEMORY_TAGS
23 #define CONFIG_INITRD_TAG
24
25 #define CONFIG_SYS_GENERIC_BOARD
26
27 /* Size of malloc() pool */
28 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
29
30 #define CONFIG_BOARD_EARLY_INIT_F
31 #define CONFIG_BOARD_LATE_INIT
32 #define CONFIG_MXC_GPIO
33 #define CONFIG_REVISION_TAG
34
35 #define CONFIG_MXC_UART
36 #define CONFIG_MXC_UART_BASE    UART1_BASE
37
38 /* MMC Configs */
39 #define CONFIG_FSL_ESDHC
40 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
41 #define CONFIG_SYS_FSL_ESDHC_NUM        2
42
43 #define CONFIG_MMC
44 #define CONFIG_CMD_MMC
45 #define CONFIG_GENERIC_MMC
46 #define CONFIG_CMD_FAT
47 #define CONFIG_CMD_EXT2
48 #define CONFIG_DOS_PARTITION
49
50 /* Eth Configs */
51 #define CONFIG_MII
52
53 #define CONFIG_FEC_MXC
54 #define IMX_FEC_BASE    FEC_BASE_ADDR
55 #define CONFIG_FEC_MXC_PHYADDR  0x1F
56
57 #define CONFIG_CMD_PING
58 #define CONFIG_CMD_DHCP
59 #define CONFIG_CMD_MII
60 #define CONFIG_CMD_NET
61
62 /* USB Configs */
63 #define CONFIG_CMD_USB
64 #define CONFIG_CMD_FAT
65 #define CONFIG_USB_EHCI
66 #define CONFIG_USB_EHCI_MX5
67 #define CONFIG_USB_STORAGE
68 #define CONFIG_USB_HOST_ETHER
69 #define CONFIG_USB_ETHER_ASIX
70 #define CONFIG_USB_ETHER_MCS7830
71 #define CONFIG_USB_ETHER_SMSC95XX
72 #define CONFIG_MXC_USB_PORT     1
73 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
74 #define CONFIG_MXC_USB_FLAGS    0
75
76 /* I2C Configs */
77 #define CONFIG_SYS_I2C
78 #define CONFIG_SYS_I2C_MXC
79
80 /* PMIC Controller */
81 #define CONFIG_POWER
82 #define CONFIG_POWER_I2C
83 #define CONFIG_DIALOG_POWER
84 #define CONFIG_POWER_FSL
85 #define CONFIG_POWER_FSL_MC13892
86 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
87 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
88
89 /* allow to overwrite serial and ethaddr */
90 #define CONFIG_ENV_OVERWRITE
91 #define CONFIG_CONS_INDEX               1
92 #define CONFIG_BAUDRATE                 115200
93
94 /* Command definition */
95 #include <config_cmd_default.h>
96 #define CONFIG_CMD_BOOTZ
97
98 #undef CONFIG_CMD_IMLS
99
100 #define CONFIG_BOOTDELAY        1
101
102 #define CONFIG_ETHPRIME         "FEC0"
103
104 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
105 #define CONFIG_SYS_TEXT_BASE    0x77800000
106
107 #define CONFIG_EXTRA_ENV_SETTINGS \
108         "script=boot.scr\0" \
109         "image=zImage\0" \
110         "fdt_file=imx53-qsb.dtb\0" \
111         "fdt_addr=0x71000000\0" \
112         "boot_fdt=try\0" \
113         "ip_dyn=yes\0" \
114         "mmcdev=0\0" \
115         "mmcpart=1\0" \
116         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
117         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
118         "loadbootscript=" \
119                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
120         "bootscript=echo Running bootscript from mmc ...; " \
121                 "source\0" \
122         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
123         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
124         "mmcboot=echo Booting from mmc ...; " \
125                 "run mmcargs; " \
126                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
127                         "if run loadfdt; then " \
128                                 "bootz ${loadaddr} - ${fdt_addr}; " \
129                         "else " \
130                                 "if test ${boot_fdt} = try; then " \
131                                         "bootz; " \
132                                 "else " \
133                                         "echo WARN: Cannot load the DT; " \
134                                 "fi; " \
135                         "fi; " \
136                 "else " \
137                         "bootz; " \
138                 "fi;\0" \
139         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
140                 "root=/dev/nfs " \
141                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
142         "netboot=echo Booting from net ...; " \
143                 "run netargs; " \
144                 "if test ${ip_dyn} = yes; then " \
145                         "setenv get_cmd dhcp; " \
146                 "else " \
147                         "setenv get_cmd tftp; " \
148                 "fi; " \
149                 "${get_cmd} ${image}; " \
150                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
151                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
152                                 "bootz ${loadaddr} - ${fdt_addr}; " \
153                         "else " \
154                                 "if test ${boot_fdt} = try; then " \
155                                         "bootz; " \
156                                 "else " \
157                                         "echo ERROR: Cannot load the DT; " \
158                                         "exit; " \
159                                 "fi; " \
160                         "fi; " \
161                 "else " \
162                         "bootz; " \
163                 "fi;\0"
164
165 #define CONFIG_BOOTCOMMAND \
166         "mmc dev ${mmcdev}; if mmc rescan; then " \
167                 "if run loadbootscript; then " \
168                         "run bootscript; " \
169                 "else " \
170                         "if run loadimage; then " \
171                                 "run mmcboot; " \
172                         "else run netboot; " \
173                         "fi; " \
174                 "fi; " \
175         "else run netboot; fi"
176
177 #define CONFIG_ARP_TIMEOUT      200UL
178
179 /* Miscellaneous configurable options */
180 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
181 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
182 #define CONFIG_AUTO_COMPLETE
183 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
184
185 /* Print Buffer Size */
186 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
187 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
188 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
189
190 #define CONFIG_SYS_MEMTEST_START       0x70000000
191 #define CONFIG_SYS_MEMTEST_END         0x70010000
192
193 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
194
195 #define CONFIG_CMDLINE_EDITING
196
197 /* Physical Memory Map */
198 #define CONFIG_NR_DRAM_BANKS    2
199 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
200 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
201 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
202 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
203 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
204
205 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
206 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
207 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
208
209 #define CONFIG_SYS_INIT_SP_OFFSET \
210         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
211 #define CONFIG_SYS_INIT_SP_ADDR \
212         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
213
214 /* FLASH and environment organization */
215 #define CONFIG_SYS_NO_FLASH
216
217 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
218 #define CONFIG_ENV_SIZE        (8 * 1024)
219 #define CONFIG_ENV_IS_IN_MMC
220 #define CONFIG_SYS_MMC_ENV_DEV 0
221
222 #define CONFIG_OF_LIBFDT
223
224 #define CONFIG_CMD_SATA
225 #ifdef CONFIG_CMD_SATA
226         #define CONFIG_DWC_AHSATA
227         #define CONFIG_SYS_SATA_MAX_DEVICE      1
228         #define CONFIG_DWC_AHSATA_PORT_ID       0
229         #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
230         #define CONFIG_LBA48
231         #define CONFIG_LIBATA
232 #endif
233
234 /* Framebuffer and LCD */
235 #define CONFIG_PREBOOT
236 #define CONFIG_VIDEO
237 #define CONFIG_VIDEO_IPUV3
238 #define CONFIG_CFB_CONSOLE
239 #define CONFIG_VGA_AS_SINGLE_DEVICE
240 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
241 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
242 #define CONFIG_VIDEO_BMP_RLE8
243 #define CONFIG_SPLASH_SCREEN
244 #define CONFIG_BMP_16BPP
245 #define CONFIG_VIDEO_LOGO
246 #define CONFIG_IPUV3_CLK        200000000
247
248 #endif                          /* __CONFIG_H */