ARM: configs: Add da850evm_nand to boot from NAND
[oweals/u-boot.git] / include / configs / mx51evk.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
4  *
5  * (C) Copyright 2009 Freescale Semiconductor, Inc.
6  *
7  * Configuration settings for the MX51EVK Board
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13  /* High Level Configuration Options */
14
15 #define CONFIG_SYS_FSL_CLK
16
17 #include <asm/arch/imx-regs.h>
18
19 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
20 #define CONFIG_SETUP_MEMORY_TAGS
21 #define CONFIG_INITRD_TAG
22 #define CONFIG_REVISION_TAG
23
24 #define CONFIG_MACH_TYPE        MACH_TYPE_MX51_BABBAGE
25 /*
26  * Size of malloc() pool
27  */
28 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
29
30 /*
31  * Hardware drivers
32  */
33 #define CONFIG_FSL_IIM
34
35 #define CONFIG_MXC_UART
36 #define CONFIG_MXC_UART_BASE    UART1_BASE
37
38 /* PMIC Controller */
39 #define CONFIG_POWER
40 #define CONFIG_POWER_SPI
41 #define CONFIG_POWER_FSL
42 #define CONFIG_FSL_PMIC_BUS     0
43 #define CONFIG_FSL_PMIC_CS      0
44 #define CONFIG_FSL_PMIC_CLK     2500000
45 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
46 #define CONFIG_FSL_PMIC_BITLEN  32
47 #define CONFIG_RTC_MC13XXX
48
49 /*
50  * MMC Configs
51  * */
52 #define CONFIG_SYS_FSL_ESDHC_ADDR       MMC_SDHC1_BASE_ADDR
53 #define CONFIG_SYS_FSL_ESDHC_NUM        2
54
55 /*
56  * Eth Configs
57  */
58
59 #define CONFIG_FEC_MXC
60 #define IMX_FEC_BASE    FEC_BASE_ADDR
61 #define CONFIG_FEC_MXC_PHYADDR  0x1F
62
63 /* USB Configs */
64 #define CONFIG_USB_EHCI_MX5
65 #define CONFIG_MXC_USB_PORT     1
66 #define CONFIG_MXC_USB_PORTSC   PORT_PTS_ULPI
67 #define CONFIG_MXC_USB_FLAGS    MXC_EHCI_POWER_PINS_ENABLED
68
69 /* Framebuffer and LCD */
70 #define CONFIG_PREBOOT
71 #define CONFIG_VIDEO_IPUV3
72 #define CONFIG_VIDEO_BMP_RLE8
73 #define CONFIG_SPLASH_SCREEN
74 #define CONFIG_BMP_16BPP
75 #define CONFIG_VIDEO_LOGO
76
77 /* allow to overwrite serial and ethaddr */
78 #define CONFIG_ENV_OVERWRITE
79
80 #define CONFIG_ETHPRIME         "FEC0"
81
82 #define CONFIG_LOADADDR         0x92000000      /* loadaddr env var */
83
84 #define CONFIG_EXTRA_ENV_SETTINGS \
85         "script=boot.scr\0" \
86         "image=zImage\0" \
87         "fdt_file=imx51-babbage.dtb\0" \
88         "fdt_addr=0x91000000\0" \
89         "boot_fdt=try\0" \
90         "ip_dyn=yes\0" \
91         "mmcdev=0\0" \
92         "mmcpart=1\0" \
93         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
94         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
95                 "root=${mmcroot}\0" \
96         "loadbootscript=" \
97                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
98         "bootscript=echo Running bootscript from mmc ...; " \
99                 "source\0" \
100         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
101         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
102         "mmcboot=echo Booting from mmc ...; " \
103                 "run mmcargs; " \
104                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
105                         "if run loadfdt; then " \
106                                 "bootz ${loadaddr} - ${fdt_addr}; " \
107                         "else " \
108                                 "if test ${boot_fdt} = try; then " \
109                                         "bootz; " \
110                                 "else " \
111                                         "echo WARN: Cannot load the DT; " \
112                                 "fi; " \
113                         "fi; " \
114                 "else " \
115                         "bootz; " \
116                 "fi;\0" \
117         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
118                 "root=/dev/nfs " \
119                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
120         "netboot=echo Booting from net ...; " \
121                 "run netargs; " \
122                 "if test ${ip_dyn} = yes; then " \
123                         "setenv get_cmd dhcp; " \
124                 "else " \
125                         "setenv get_cmd tftp; " \
126                 "fi; " \
127                 "${get_cmd} ${image}; " \
128                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
129                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
130                                 "bootz ${loadaddr} - ${fdt_addr}; " \
131                         "else " \
132                                 "if test ${boot_fdt} = try; then " \
133                                         "bootz; " \
134                                 "else " \
135                                         "echo ERROR: Cannot load the DT; " \
136                                         "exit; " \
137                                 "fi; " \
138                         "fi; " \
139                 "else " \
140                         "bootz; " \
141                 "fi;\0"
142
143 #define CONFIG_BOOTCOMMAND \
144         "mmc dev ${mmcdev}; if mmc rescan; then " \
145                 "if run loadbootscript; then " \
146                         "run bootscript; " \
147                 "else " \
148                         "if run loadimage; then " \
149                                 "run mmcboot; " \
150                         "else run netboot; " \
151                         "fi; " \
152                 "fi; " \
153         "else run netboot; fi"
154
155 #define CONFIG_ARP_TIMEOUT      200UL
156
157 /*
158  * Miscellaneous configurable options
159  */
160
161 #define CONFIG_SYS_MEMTEST_START       0x90000000
162 #define CONFIG_SYS_MEMTEST_END         0x90010000
163
164 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
165
166 /*-----------------------------------------------------------------------
167  * Physical Memory Map
168  */
169 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
170 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
171
172 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
173 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
174 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
175
176 #define CONFIG_SYS_INIT_SP_OFFSET \
177         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
178 #define CONFIG_SYS_INIT_SP_ADDR \
179         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
180
181 #define CONFIG_SYS_DDR_CLKSEL   0
182 #define CONFIG_SYS_CLKTL_CBCDR  0x59E35100
183 #define CONFIG_SYS_MAIN_PWR_ON
184
185 /*-----------------------------------------------------------------------
186  * environment organization
187  */
188 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
189 #define CONFIG_ENV_SIZE        (8 * 1024)
190 #define CONFIG_SYS_MMC_ENV_DEV 0
191
192 #endif