include/configs/mccmon6.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2016-2017
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11
  12 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  13 #include "imx6_spl.h"
  14
  15 #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
  16 #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
  17 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  18
  19 /*
  20  * Below defines are set but NOT really used since we by
  21  * design force U-Boot run when we boot in development
  22  * mode from SD card (SD2)
  23  */
  24 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
  25 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
  26 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000)
  27 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"
  28
  29 /* Size of malloc() pool */
  30 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  31
  32 #define CONFIG_BOARD_LATE_INIT
  33 #define CONFIG_MXC_UART_BASE            UART1_BASE
  34
  35 #define CONFIG_SYS_MEMTEST_START        0x10000000
  36 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  37
  38 /* MMC Configuration */
  39 #define CONFIG_SYS_FSL_USDHC_NUM        2
  40 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  41
  42 /* NOR 16-bit mode */
  43 #define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
  44 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
  45 #define CONFIG_SYS_FLASH_EMPTY_INFO
  46 #define CONFIG_FLASH_VERIFY
  47
  48 /* NOR Flash MTD */
  49 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  50 #define CONFIG_SYS_FLASH_BANKS_LIST     { (CONFIG_SYS_FLASH_BASE) }
  51 #define CONFIG_SYS_FLASH_BANKS_SIZES    { (32 * SZ_1M) }
  52
  53 /* Ethernet Configuration */
  54 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  55 #define CONFIG_FEC_MXC_PHYADDR          1
  56
  57 #define CONFIG_EXTRA_ENV_SETTINGS \
  58         "console=ttymxc0,115200 quiet\0" \
  59         "fdt_high=0xffffffff\0" \
  60         "initrd_high=0xffffffff\0" \
  61         "boot_os=yes\0" \
  62         "kernelsize=0x300000\0" \
  63         "disable_giga=yes\0" \
  64         "download_kernel=" \
  65                 "tftpboot ${loadaddr} ${kernel_file};\0" \
  66         "get_boot_medium=" \
  67                 "setenv boot_medium nor;" \
  68                 "setexpr.l _src_sbmr1 *0x020d8004;" \
  69                 "setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
  70                 "if test ${_b_medium} = 40; then " \
  71                         "setenv boot_medium sdcard;" \
  72                 "fi\0" \
  73         "kernel_file=fitImage\0" \
  74         "boot_sd=" \
  75                 "echo '#######################';" \
  76                 "echo '# Factory SDcard Boot #';" \
  77                 "echo '#######################';" \
  78                 "setenv mmcdev 1;" \
  79                 "setenv mmcfactorydev 0;" \
  80                 "setenv mmcfactorypart 1;" \
  81                 "run factory_flash_img;\0" \
  82         "boot_nor=" \
  83                 "setenv kernelnor 0x08180000;" \
  84                 "setenv bootargs console=${console} " \
  85                 CONFIG_MTDPARTS_DEFAULT " " \
  86                 "root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
  87                 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
  88                 "bootm ${loadaddr};reset;\0" \
  89         "boot_recovery=" \
  90                 "echo '#######################';" \
  91                 "echo '# RECOVERY SWU Boot   #';" \
  92                 "echo '#######################';" \
  93                 "setenv rootfsloadaddr 0x13000000;" \
  94                 "setenv swukernelnor 0x08980000;" \
  95                 "setenv swurootfsnor 0x09180000;" \
  96                 "setenv bootargs console=${console} " \
  97                 CONFIG_MTDPARTS_DEFAULT " " \
  98                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
  99                     ":${hostname}::off root=/dev/ram rw;" \
 100                 "cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
 101                 "cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
 102                 "bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
 103         "boot_tftp=" \
 104                 "echo '#######################';" \
 105                 "echo '# TFTP Boot           #';" \
 106                 "echo '#######################';" \
 107                 "if run download_kernel; then " \
 108                      "setenv bootargs console=${console} " \
 109                      "root=/dev/mmcblk0p2 rootwait;" \
 110                      "bootm $loadaddr};reset;" \
 111                 "fi\0" \
 112         "bootcmd=" \
 113                 "if test -n ${recovery_status}; then " \
 114                      "run boot_recovery;" \
 115                 "else " \
 116                      "if test ! -n ${boot_medium}; then " \
 117                           "run get_boot_medium;" \
 118                           "if test ${boot_medium} = sdcard; then " \
 119                               "run boot_sd;" \
 120                           "else " \
 121                               "run boot_nor;" \
 122                           "fi;" \
 123                      "else " \
 124                           "if test ${boot_medium} = tftp; then " \
 125                               "run boot_tftp;" \
 126                           "fi;" \
 127                      "fi;" \
 128                 "fi\0" \
 129         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 130         "bootdev=1\0" \
 131         "bootpart=1\0" \
 132         "netdev=eth0\0" \
 133         "load_addr=0x11000000\0" \
 134         "uboot_file=u-boot.img\0" \
 135         "SPL_file=SPL\0" \
 136         "load_uboot=tftp ${load_addr} ${uboot_file}\0" \
 137         "nor_img_addr=0x11000000\0" \
 138         "nor_img_file=core-image-lwn-mccmon6.nor\0" \
 139         "emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
 140         "nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
 141         "nor_img_size=0x02000000\0" \
 142         "factory_script_file=factory.scr\0" \
 143         "factory_load_script=" \
 144                 "if test -e mmc ${mmcdev}:${mmcfactorypart} " \
 145                     "${factory_script_file}; then " \
 146                     "load mmc ${mmcdev}:${mmcfactorypart} " \
 147                      "${loadaddr} ${factory_script_file};" \
 148                 "fi\0" \
 149         "factory_script=echo Running factory script from mmc${mmcdev} ...; " \
 150                 "source ${loadaddr}\0" \
 151         "factory_flash_img="\
 152                 "echo 'Flash mccmon6 with factory images'; " \
 153                 "if run factory_load_script; then " \
 154                         "run factory_script;" \
 155                 "else " \
 156                     "echo No factory script: ${factory_script_file} found on " \
 157                     "device ${mmcdev};" \
 158                     "run factory_nor_img;" \
 159                     "run factory_eMMC_img;" \
 160                     "run factory_SPL_falcon_setup;" \
 161                 "fi\0" \
 162         "factory_eMMC_img="\
 163                 "echo 'Update mccmon6 eMMC image'; " \
 164                 "if load mmc ${mmcdev}:${mmcfactorypart} " \
 165                     "${loadaddr} ${emmc_img_file}; then " \
 166                     "setexpr fw_sz ${filesize} / 0x200;" \
 167                     "setexpr fw_sz ${fw_sz} + 1;" \
 168                     "mmc dev ${mmcfactorydev};" \
 169                     "mmc write ${loadaddr} 0x0 ${fw_sz};" \
 170                 "fi\0" \
 171         "factory_nor_img="\
 172                 "echo 'Update mccmon6 NOR image'; " \
 173                 "if load mmc ${mmcdev}:${mmcfactorypart} " \
 174                     "${nor_img_addr} ${nor_img_file}; then " \
 175                         "run nor_update;" \
 176                 "fi\0" \
 177         "nor_update=" \
 178                     "protect off ${nor_bank_start} +${nor_img_size};" \
 179                     "erase ${nor_bank_start} +${nor_img_size};" \
 180                     "setexpr nor_img_size ${nor_img_size} / 4; " \
 181                     "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
 182         "factory_SPL_falcon_setup="\
 183                 "echo 'Write Falcon boot data'; " \
 184                 "setenv kernelnor 0x08180000;" \
 185                 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
 186                 "spl export fdt ${loadaddr};" \
 187                 "setenv nor_img_addr ${fdtargsaddr};" \
 188                 "setenv nor_img_size 0x20000;" \
 189                 "setenv nor_bank_start " \
 190                                 __stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
 191                 "run nor_update\0" \
 192         "tftp_nor_uboot="\
 193                 "echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
 194                 "setenv nor_img_file u-boot.img; " \
 195                 "setenv nor_img_size 0x80000; " \
 196                 "setenv nor_bank_start 0x08080000; " \
 197                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
 198                     "run nor_update;" \
 199                 "fi\0" \
 200         "tftp_nor_fitImg="\
 201                 "echo 'Update mccmon6 NOR fitImage via TFTP'; " \
 202                 "setenv nor_img_file fitImage; " \
 203                 "setenv nor_img_size 0x500000; " \
 204                 "setenv nor_bank_start 0x08180000; " \
 205                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
 206                     "run nor_update;" \
 207                 "fi\0" \
 208         "tftp_nor_img="\
 209                 "echo 'Update mccmon6 NOR image via TFTP'; " \
 210                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
 211                     "run nor_update;" \
 212                 "fi\0" \
 213         "tftp_nor_SPL="\
 214                 "if tftp ${load_addr} SPL_padded; then " \
 215                     "erase 0x08000000 +0x20000;" \
 216                     "cp.b ${load_addr} 0x08000000 0x20000;" \
 217                 "fi;\0" \
 218         "tftp_sd_SPL="\
 219             "if mmc dev 1; then "      \
 220                 "if tftp ${load_addr} ${SPL_file}; then " \
 221                     "setexpr fw_sz ${filesize} / 0x200; " \
 222                     "setexpr fw_sz ${fw_sz} + 1; " \
 223                     "mmc write ${load_addr} 0x2 ${fw_sz};" \
 224                 "fi;" \
 225             "fi;\0" \
 226         "tftp_sd_uboot="\
 227             "if mmc dev 1; then "      \
 228                 "if run load_uboot; then " \
 229                     "setexpr fw_sz ${filesize} / 0x200; " \
 230                     "setexpr fw_sz ${fw_sz} + 1; " \
 231                     "mmc write ${load_addr} 0x8A ${fw_sz};" \
 232                 "fi;" \
 233             "fi;\0"
 234
 235 /* Physical Memory Map */
 236 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 237
 238 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 239 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 240 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 241
 242 #define CONFIG_SYS_INIT_SP_OFFSET \
 243         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 244 #define CONFIG_SYS_INIT_SP_ADDR \
 245         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 246
 247 /* Environment organization */
 248
 249 /* Envs are stored in NOR flash */
 250
 251 #endif                         /* __CONFIG_H * */