include/configs/ls1021aiot.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
  11
  12 #define CONFIG_SYS_FSL_CLK
  13
  14 /*
  15  * Size of malloc() pool
  16  */
  17 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  18
  19 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  20 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  21
  22 /* XHCI Support - enabled by default */
  23 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
  24
  25 #define CONFIG_SYS_CLK_FREQ             100000000
  26 #define CONFIG_DDR_CLK_FREQ             100000000
  27
  28 /*
  29  * DDR: 800 MHz ( 1600 MT/s data rate )
  30  */
  31
  32 #define DDR_SDRAM_CFG                   0x470c0008
  33 #define DDR_CS0_BNDS                    0x008000bf
  34 #define DDR_CS0_CONFIG                  0x80014302
  35 #define DDR_TIMING_CFG_0                0x50550004
  36 #define DDR_TIMING_CFG_1                0xbcb38c56
  37 #define DDR_TIMING_CFG_2                0x0040d120
  38 #define DDR_TIMING_CFG_3                0x010e1000
  39 #define DDR_TIMING_CFG_4                0x00000001
  40 #define DDR_TIMING_CFG_5                0x03401400
  41 #define DDR_SDRAM_CFG_2                 0x00401010
  42 #define DDR_SDRAM_MODE                  0x00061c60
  43 #define DDR_SDRAM_MODE_2                0x00180000
  44 #define DDR_SDRAM_INTERVAL              0x18600618
  45 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  46 #define DDR_DDR_WRLVL_CNTL_2    0x05060607
  47 #define DDR_DDR_WRLVL_CNTL_3    0x05050505
  48 #define DDR_DDR_CDR1                    0x80040000
  49 #define DDR_DDR_CDR2                    0x00000001
  50 #define DDR_SDRAM_CLK_CNTL              0x02000000
  51 #define DDR_DDR_ZQ_CNTL                 0x89080600
  52 #define DDR_CS0_CONFIG_2                0
  53 #define DDR_SDRAM_CFG_MEM_EN    0x80000000
  54 #define SDRAM_CFG2_D_INIT               0x00000010
  55 #define DDR_CDR2_VREF_TRAIN_EN  0x00000080
  56 #define SDRAM_CFG2_FRC_SR               0x80000000
  57 #define SDRAM_CFG_BI                    0x00000001
  58
  59 #ifdef CONFIG_RAMBOOT_PBL
  60 #define CONFIG_SYS_FSL_PBL_PBI  \
  61         board/freescale/ls1021aiot/ls102xa_pbi.cfg
  62 #endif
  63
  64 #ifdef CONFIG_SD_BOOT
  65 #define CONFIG_SYS_FSL_PBL_RCW  \
  66         board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
  67 #define CONFIG_SPL_FRAMEWORK
  68 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  69 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  70 #define CONFIG_SPL_ENV_SUPPORT
  71 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  72 #define CONFIG_SPL_I2C_SUPPORT
  73 #define CONFIG_SPL_WATCHDOG_SUPPORT
  74 #define CONFIG_SPL_SERIAL_SUPPORT
  75 #define CONFIG_SPL_MMC_SUPPORT
  76 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
  77
  78 #define CONFIG_SPL_TEXT_BASE    0x10000000
  79 #define CONFIG_SPL_MAX_SIZE             0x1a000
  80 #define CONFIG_SPL_STACK                0x1001d000
  81 #define CONFIG_SPL_PAD_TO               0x1c000
  82 #define CONFIG_SYS_TEXT_BASE    0x82000000
  83
  84 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  85                 CONFIG_SYS_MONITOR_LEN)
  86 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  87 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  88 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  89 #define CONFIG_SYS_MONITOR_LEN          0x80000
  90 #endif
  91
  92 #ifdef CONFIG_QSPI_BOOT
  93 #define CONFIG_SYS_TEXT_BASE            0x40010000
  94 #endif
  95
  96 #define CONFIG_NR_DRAM_BANKS            1
  97
  98 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
  99 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 100
 101 /*
 102  * Serial Port
 103  */
 104 #define CONFIG_CONS_INDEX               1
 105 #define CONFIG_SYS_NS16550_SERIAL
 106 #define CONFIG_SYS_NS16550_REG_SIZE     1
 107 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 108
 109 /*
 110  * I2C
 111  */
 112 #define CONFIG_CMD_I2C
 113 #define CONFIG_SYS_I2C
 114 #define CONFIG_SYS_I2C_MXC
 115 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 116 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 117 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 118
 119 /* EEPROM */
 120 #define CONFIG_ID_EEPROM
 121 #define CONFIG_SYS_I2C_EEPROM_NXID
 122 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 123 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x51
 124 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 125
 126 /*
 127  * MMC
 128  */
 129 #define CONFIG_CMD_MMC
 130 #define CONFIG_FSL_ESDHC
 131
 132 /* SATA */
 133 #define CONFIG_LIBATA
 134 #define CONFIG_SCSI_AHCI
 135 #define CONFIG_SCSI_AHCI_PLAT
 136 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
 137 #define PCI_DEVICE_ID_FREESCALE_AHCI    0x0440
 138 #endif
 139 #define CONFIG_SCSI_DEV_LIST            {PCI_VENDOR_ID_FREESCALE, \
 140         PCI_DEVICE_ID_FREESCALE_AHCI}
 141
 142 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 143 #define CONFIG_SYS_SCSI_MAX_LUN         1
 144 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 145                 CONFIG_SYS_SCSI_MAX_LUN)
 146
 147 /* SPI */
 148 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 149 #define CONFIG_SPI_FLASH_SPANSION
 150
 151 /* QSPI */
 152 #define QSPI0_AMBA_BASE                 0x40000000
 153 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 154 #define FSL_QSPI_FLASH_NUM              2
 155 #define CONFIG_SPI_FLASH_BAR
 156 #define CONFIG_SPI_FLASH_SPANSION
 157 #endif
 158
 159 /* DM SPI */
 160 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 161 #define CONFIG_CMD_SF
 162 #define CONFIG_DM_SPI_FLASH
 163 #endif
 164
 165 /*
 166  * eTSEC
 167  */
 168 #define CONFIG_TSEC_ENET
 169
 170 #ifdef CONFIG_TSEC_ENET
 171 #define CONFIG_MII
 172 #define CONFIG_MII_DEFAULT_TSEC         1
 173 #define CONFIG_TSEC1                    1
 174 #define CONFIG_TSEC1_NAME               "eTSEC1"
 175 #define CONFIG_TSEC2                    1
 176 #define CONFIG_TSEC2_NAME               "eTSEC2"
 177
 178 #define TSEC1_PHY_ADDR                  1
 179 #define TSEC2_PHY_ADDR                  3
 180
 181 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 182 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 183
 184 #define TSEC1_PHYIDX                    0
 185 #define TSEC2_PHYIDX                    0
 186
 187 #define CONFIG_ETHPRIME                 "eTSEC2"
 188
 189 #define CONFIG_PHY_ATHEROS
 190
 191 #define CONFIG_HAS_ETH0
 192 #define CONFIG_HAS_ETH1
 193 #define CONFIG_HAS_ETH2
 194 #endif
 195
 196 /* PCIe */
 197 #define CONFIG_PCIE1            /* PCIE controler 1 */
 198 #define CONFIG_PCIE2            /* PCIE controler 2 */
 199
 200 #define FSL_PCIE_COMPAT         "fsl,ls1021a-pcie"
 201
 202 #ifdef CONFIG_PCI
 203 #define CONFIG_PCI_SCAN_SHOW
 204 #endif
 205
 206 #define CONFIG_CMD_PING
 207 #define CONFIG_CMD_DHCP
 208 #define CONFIG_CMD_MII
 209
 210 #define CONFIG_CMDLINE_TAG
 211 #define CONFIG_CMDLINE_EDITING
 212
 213 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 214 #define CONFIG_LAYERSCAPE_NS_ACCESS
 215 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 216 #define COUNTER_FREQUENCY               12500000
 217
 218 #define CONFIG_HWCONFIG
 219 #define HWCONFIG_BUFFER_SIZE            256
 220
 221 #define CONFIG_FSL_DEVICE_DISABLE
 222
 223 #define CONFIG_EXTRA_ENV_SETTINGS       \
 224         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 225 "initrd_high=0xffffffff\0"      \
 226 "fdt_high=0xffffffff\0"
 227
 228 /*
 229  * Miscellaneous configurable options
 230  */
 231 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 232 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 233 #define CONFIG_AUTO_COMPLETE
 234
 235 #define CONFIG_CMD_GREPENV
 236 #define CONFIG_CMD_MEMINFO
 237
 238 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 239
 240 #define CONFIG_LS102XA_STREAM_ID
 241
 242 #define CONFIG_SYS_INIT_SP_OFFSET \
 243         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 244 #define CONFIG_SYS_INIT_SP_ADDR \
 245         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 246
 247 #ifdef CONFIG_SPL_BUILD
 248 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 249 #else
 250 /* start of monitor */
 251 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 252 #endif
 253
 254 #define CONFIG_SYS_QE_FW_ADDR   0x67f40000
 255
 256 /*
 257  * Environment
 258  */
 259
 260 #define CONFIG_ENV_OVERWRITE
 261
 262 #if defined(CONFIG_SD_BOOT)
 263 #define CONFIG_ENV_OFFSET               0x100000
 264 #define CONFIG_SYS_MMC_ENV_DEV  0
 265 #define CONFIG_ENV_SIZE                 0x2000
 266 #elif defined(CONFIG_QSPI_BOOT)
 267 #define CONFIG_ENV_SIZE                 0x2000
 268 #define CONFIG_ENV_OFFSET               0x100000
 269 #define CONFIG_ENV_SECT_SIZE    0x10000
 270 #endif
 271
 272 #define CONFIG_OF_BOARD_SETUP
 273 #define CONFIG_OF_STDOUT_VIA_ALIAS
 274
 275 #define CONFIG_MISC_INIT_R
 276
 277 #include <asm/fsl_secure_boot.h>
 278
 279 #endif