1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2016 Freescale Semiconductor
6 #ifndef __LS1012A_COMMON_H
7 #define __LS1012A_COMMON_H
11 #include <asm/arch/config.h>
12 #include <asm/arch/stream_id_lsch2.h>
14 #define CONFIG_SYS_CLK_FREQ 125000000
16 #define CONFIG_SKIP_LOWLEVEL_INIT
19 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
21 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
23 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
25 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
26 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
27 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
28 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL
30 /* Generic Timer Definitions */
31 #define COUNTER_FREQUENCY 25000000 /* 25MHz */
34 #define CONFIG_LAYERSCAPE_NS_ACCESS
36 /* Size of malloc() pool */
37 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
40 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_TFABOOT)
41 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
42 #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000
43 #define CONFIG_SPI_FLASH_SPANSION
44 #define CONFIG_FSL_SPI_INTERFACE
45 #define CONFIG_SF_DATAFLASH
47 #define CONFIG_FSL_QSPI
48 #define QSPI0_AMBA_BASE 0x40000000
49 #define CONFIG_SPI_FLASH_SPANSION
51 #define FSL_QSPI_FLASH_SIZE SZ_64M
52 #define FSL_QSPI_FLASH_NUM 2
57 #define CONFIG_ENV_OVERWRITE
59 #define CONFIG_ENV_SIZE 0x40000 /* 256KB */
61 #define CONFIG_ENV_OFFSET 0x500000 /* 5MB */
63 #define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
65 #define CONFIG_ENV_SECT_SIZE 0x40000
69 #define CONFIG_SCSI_AHCI_PLAT
71 #define CONFIG_SYS_SATA AHCI_BASE_ADDR
73 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
74 #define CONFIG_SYS_SCSI_MAX_LUN 1
75 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
76 CONFIG_SYS_SCSI_MAX_LUN)
79 #define CONFIG_SYS_I2C
81 #define CONFIG_SYS_NS16550_SERIAL
82 #define CONFIG_SYS_NS16550_REG_SIZE 1
83 #define CONFIG_SYS_NS16550_CLK (get_serial_clock())
85 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
87 #define CONFIG_SYS_HZ 1000
89 #define CONFIG_HWCONFIG
90 #define HWCONFIG_BUFFER_SIZE 128
92 #ifndef CONFIG_SPL_BUILD
93 #define BOOT_TARGET_DEVICES(func) \
98 #include <config_distro_bootcmd.h>
101 /* Initial environment variables */
102 #define CONFIG_EXTRA_ENV_SETTINGS \
104 "loadaddr=0x80100000\0" \
105 "kernel_addr=0x100000\0" \
106 "fdt_high=0xffffffffffffffff\0" \
107 "initrd_high=0xffffffffffffffff\0" \
108 "kernel_start=0x1000000\0" \
109 "kernel_load=0xa0000000\0" \
110 "kernel_size=0x2800000\0" \
112 #undef CONFIG_BOOTCOMMAND
113 #ifdef CONFIG_TFABOOT
114 #define QSPI_NOR_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\
115 "$kernel_start $kernel_size && "\
118 #define CONFIG_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\
119 "$kernel_start $kernel_size && "\
123 /* Monitor Command Prompt */
124 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
125 #define CONFIG_SYS_MAXARGS 64 /* max command args */
127 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
129 #include <asm/arch/soc.h>
131 #endif /* __LS1012A_COMMON_H */