ARMV7: AM3517/05: Add support for CraneBoard.
[oweals/u-boot.git] / include / configs / incaip.h
1 /*
2  * (C) Copyright 2003-2005
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24 /*
25  * This file contains the configuration parameters for the INCA-IP board.
26  */
27
28 #ifndef __CONFIG_H
29 #define __CONFIG_H
30
31 #define CONFIG_MIPS32           1       /* MIPS 4Kc CPU core    */
32 #define CONFIG_INCA_IP          1       /* on a INCA-IP Board   */
33
34 /*
35  * Clock for the MIPS core (MHz)
36  * allowed values: 100000000, 133000000, and 150000000 (default)
37  */
38 #ifndef CONFIG_CPU_CLOCK_RATE
39 #define CONFIG_CPU_CLOCK_RATE   150000000
40 #endif
41
42 #define INFINEON_EBU_BOOTCFG    0x40C4  /* CMULT = 8 */
43
44 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
45
46 #define CONFIG_BAUDRATE         115200
47
48 /* valid baudrates */
49 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
50
51 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
52
53 #define CONFIG_PREBOOT  "echo;" \
54         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
55         "echo"
56
57 #undef  CONFIG_BOOTARGS
58
59 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
60         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
61                 "nfsroot=${serverip}:${rootpath}\0"                     \
62         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
63         "addip=setenv bootargs ${bootargs} "                            \
64                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
65                 ":${hostname}:${netdev}:off\0"                          \
66         "addmisc=setenv bootargs ${bootargs} "                          \
67                 "console=ttyS0,${baudrate} "                            \
68                 "ethaddr=${ethaddr} "                                   \
69                 "panic=1\0"                                             \
70         "flash_nfs=run nfsargs addip addmisc;"                          \
71                 "bootm ${kernel_addr}\0"                                \
72         "flash_self=run ramargs addip addmisc;"                         \
73                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
74         "net_nfs=tftp 80500000 ${bootfile};"                            \
75                 "run nfsargs addip addmisc;bootm\0"                     \
76         "rootpath=/opt/eldk/mips_4KC\0"                                 \
77         "bootfile=/tftpboot/INCA/uImage\0"                              \
78         "kernel_addr=B0040000\0"                                        \
79         "ramdisk_addr=B0100000\0"                                       \
80         "u-boot=/tftpboot/INCA/u-boot.bin\0"                            \
81         "load=tftp 80500000 ${u-boot}\0"                                \
82         "update=protect off 1:0-2;era 1:0-2;"                           \
83                 "cp.b 80500000 B0000000 ${filesize}\0"                  \
84         ""
85 #define CONFIG_BOOTCOMMAND      "run flash_self"
86
87
88 /*
89  * BOOTP options
90  */
91 #define CONFIG_BOOTP_BOOTFILESIZE
92 #define CONFIG_BOOTP_BOOTPATH
93 #define CONFIG_BOOTP_GATEWAY
94 #define CONFIG_BOOTP_HOSTNAME
95
96
97 /*
98  * Command line configuration.
99  */
100 #include <config_cmd_default.h>
101
102 #define CONFIG_CMD_ASKENV
103 #define CONFIG_CMD_DHCP
104 #define CONFIG_CMD_ELF
105 #define CONFIG_CMD_JFFS2
106 #define CONFIG_CMD_NFS
107 #define CONFIG_CMD_PING
108 #define CONFIG_CMD_SNTP
109
110
111 /*
112  * Miscellaneous configurable options
113  */
114 #define CONFIG_SYS_LONGHELP                             /* undef to save memory      */
115 #define CONFIG_SYS_PROMPT               "INCA-IP # "    /* Monitor Command Prompt    */
116 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size   */
117 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
118 #define CONFIG_SYS_MAXARGS              16              /* max number of command args*/
119
120 #define CONFIG_SYS_MALLOC_LEN           128*1024
121
122 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
123
124 #define CONFIG_SYS_MIPS_TIMER_FREQ      (incaip_get_cpuclk() / 2)
125
126 #define CONFIG_SYS_HZ                   1000
127
128 #define CONFIG_SYS_SDRAM_BASE           0x80000000
129
130 #define CONFIG_SYS_LOAD_ADDR            0x80100000      /* default load address */
131
132 #define CONFIG_SYS_MEMTEST_START        0x80100000
133 #define CONFIG_SYS_MEMTEST_END          0x80800000
134
135 /*-----------------------------------------------------------------------
136  * FLASH and environment organization
137  */
138 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks */
139 #define CONFIG_SYS_MAX_FLASH_SECT       (128)   /* max number of sectors on one chip */
140
141 #define PHYS_FLASH_1            0xb0000000 /* Flash Bank #1 */
142 #define PHYS_FLASH_2            0xb0800000 /* Flash Bank #2 */
143
144 /* The following #defines are needed to get flash environment right */
145 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
146 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
147
148 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
149
150 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
151
152 /* timeout values are in ticks */
153 #define CONFIG_SYS_FLASH_ERASE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
154 #define CONFIG_SYS_FLASH_WRITE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
155
156 #define CONFIG_ENV_IS_IN_FLASH  1
157
158 /* Address and size of Primary Environment Sector       */
159 #define CONFIG_ENV_ADDR         0xB0030000
160 #define CONFIG_ENV_SIZE         0x10000
161
162 #define CONFIG_FLASH_16BIT
163
164 #define CONFIG_NR_DRAM_BANKS    1
165
166 #define CONFIG_INCA_IP_SWITCH
167 #define CONFIG_NET_MULTI
168 #define CONFIG_INCA_IP_SWITCH_AMDIX
169
170 /*
171  * JFFS2 partitions
172  */
173 /* No command line, one static partition, use all space on the device */
174 #undef CONFIG_CMD_MTDPARTS
175 #define CONFIG_JFFS2_DEV                "nor1"
176 #define CONFIG_JFFS2_PART_SIZE          0xFFFFFFFF
177 #define CONFIG_JFFS2_PART_OFFSET        0x00000000
178
179 /* mtdparts command line support */
180 /*
181 #define CONFIG_CMD_MTDPARTS
182 #define MTDIDS_DEFAULT          "nor0=INCA-IP Bank 0"
183 #define MTDPARTS_DEFAULT        "mtdparts=INCA-IP Bank 0:192k(uboot)," \
184                                                         "64k(env)," \
185                                                         "768k(linux)," \
186                                                         "1m@3m(rootfs)," \
187                                                         "768k(linux2)," \
188                                                         "3m@5m(rootfs2)"
189 */
190
191 /*-----------------------------------------------------------------------
192  * Cache Configuration
193  */
194 #define CONFIG_SYS_DCACHE_SIZE          4096
195 #define CONFIG_SYS_ICACHE_SIZE          4096
196 #define CONFIG_SYS_CACHELINE_SIZE       16
197
198 #endif  /* __CONFIG_H */