include/configs/imx8qm_mek.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #ifndef __IMX8QM_MEK_H
   7 #define __IMX8QM_MEK_H
   8
   9 #include <linux/sizes.h>
  10 #include <asm/arch/imx-regs.h>
  11
  12 #ifdef CONFIG_SPL_BUILD
  13 #define CONFIG_SPL_TEXT_BASE                            0x0
  14 #define CONFIG_SPL_MAX_SIZE                             (124 * 1024)
  15 #define CONFIG_SYS_MONITOR_LEN                          (1024 * 1024)
  16 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
  17 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR         0x800
  18 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION              0
  19
  20 #define CONFIG_SPL_LDSCRIPT             "arch/arm/cpu/armv8/u-boot-spl.lds"
  21 #define CONFIG_SPL_STACK                0x013E000
  22 #define CONFIG_SPL_BSS_START_ADDR       0x00128000
  23 #define CONFIG_SPL_BSS_MAX_SIZE         0x1000  /* 4 KB */
  24 #define CONFIG_SYS_SPL_MALLOC_START     0x00120000
  25 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x3000  /* 12 KB */
  26 #define CONFIG_SERIAL_LPUART_BASE       0x5a060000
  27 #define CONFIG_MALLOC_F_ADDR            0x00120000
  28
  29 #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
  30
  31 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
  32
  33 #define CONFIG_OF_EMBED
  34 #endif
  35
  36 #define CONFIG_REMAKE_ELF
  37
  38 #define CONFIG_BOARD_EARLY_INIT_F
  39
  40 /* Flat Device Tree Definitions */
  41 #define CONFIG_OF_BOARD_SETUP
  42
  43 #undef CONFIG_CMD_EXPORTENV
  44 #undef CONFIG_CMD_IMPORTENV
  45 #undef CONFIG_CMD_IMLS
  46
  47 #undef CONFIG_CMD_CRC32
  48 #undef CONFIG_BOOTM_NETBSD
  49
  50 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  51 #define USDHC1_BASE_ADDR                0x5B010000
  52 #define USDHC2_BASE_ADDR                0x5B020000
  53 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  54
  55 #define CONFIG_ENV_OVERWRITE
  56
  57 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  58
  59 /* Initial environment variables */
  60 #define CONFIG_EXTRA_ENV_SETTINGS               \
  61         "script=boot.scr\0" \
  62         "image=Image\0" \
  63         "panel=NULL\0" \
  64         "console=ttyLP0,${baudrate} earlycon=lpuart32,0x5a060000,${baudrate}\0" \
  65         "fdt_addr=0x83000000\0"                 \
  66         "fdt_high=0xffffffffffffffff\0"         \
  67         "boot_fdt=try\0" \
  68         "fdt_file=fsl-imx8qxp-mek.dtb\0" \
  69         "initrd_addr=0x83800000\0"              \
  70         "initrd_high=0xffffffffffffffff\0" \
  71         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  72         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  73         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  74         "mmcautodetect=yes\0" \
  75         "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
  76         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  77         "bootscript=echo Running bootscript from mmc ...; " \
  78                 "source\0" \
  79         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  80         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  81         "mmcboot=echo Booting from mmc ...; " \
  82                 "run mmcargs; " \
  83                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  84                         "if run loadfdt; then " \
  85                                 "booti ${loadaddr} - ${fdt_addr}; " \
  86                         "else " \
  87                                 "echo WARN: Cannot load the DT; " \
  88                         "fi; " \
  89                 "else " \
  90                         "echo wait for boot; " \
  91                 "fi;\0" \
  92         "netargs=setenv bootargs console=${console} " \
  93                 "root=/dev/nfs " \
  94                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  95         "netboot=echo Booting from net ...; " \
  96                 "run netargs;  " \
  97                 "if test ${ip_dyn} = yes; then " \
  98                         "setenv get_cmd dhcp; " \
  99                 "else " \
 100                         "setenv get_cmd tftp; " \
 101                 "fi; " \
 102                 "${get_cmd} ${loadaddr} ${image}; " \
 103                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 104                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 105                                 "booti ${loadaddr} - ${fdt_addr}; " \
 106                         "else " \
 107                                 "echo WARN: Cannot load the DT; " \
 108                         "fi; " \
 109                 "else " \
 110                         "booti; " \
 111                 "fi;\0"
 112
 113 #define CONFIG_BOOTCOMMAND \
 114            "mmc dev ${mmcdev}; if mmc rescan; then " \
 115                    "if run loadbootscript; then " \
 116                            "run bootscript; " \
 117                    "else " \
 118                            "if run loadimage; then " \
 119                                    "run mmcboot; " \
 120                            "else run netboot; " \
 121                            "fi; " \
 122                    "fi; " \
 123            "else booti ${loadaddr} - ${fdt_addr}; fi"
 124
 125 /* Link Definitions */
 126 #define CONFIG_LOADADDR                 0x80280000
 127
 128 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 129
 130 #define CONFIG_SYS_INIT_SP_ADDR         0x80200000
 131
 132 /* Default environment is in SD */
 133 #define CONFIG_ENV_SIZE                 0x1000
 134 #define CONFIG_ENV_OFFSET               (64 * SZ_64K)
 135 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 136
 137 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
 138
 139 /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
 140 #define CONFIG_SYS_MMC_ENV_DEV          1   /* USDHC2 */
 141 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 142 #define CONFIG_SYS_FSL_USDHC_NUM        2
 143
 144 /* Size of malloc() pool */
 145 #define CONFIG_SYS_MALLOC_LEN           ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
 146
 147 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 148 #define PHYS_SDRAM_1                    0x80000000
 149 #define PHYS_SDRAM_2                    0x880000000
 150 #define PHYS_SDRAM_1_SIZE               0x80000000      /* 2 GB */
 151 #define PHYS_SDRAM_2_SIZE               0x100000000     /* 4 GB */
 152
 153 /* Serial */
 154 #define CONFIG_BAUDRATE                 115200
 155
 156 /* Generic Timer Definitions */
 157 #define COUNTER_FREQUENCY               8000000 /* 8MHz */
 158
 159 /* Networking */
 160 #define CONFIG_FEC_XCV_TYPE             RGMII
 161 #define FEC_QUIRK_ENET_MAC
 162
 163 #endif /* __IMX8QM_MEK_H */