sunxi: Add support for using MII phy-s with the GMAC nic
[oweals/u-boot.git] / include / configs / icon.h
1 /*
2  * (C) Copyright 2009-2010
3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * icon.h - configuration for Mosaixtech ICON (440SPe)
10  */
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 /*
16  * High Level Configuration Options
17  */
18 #define CONFIG_ICON             1               /* Board is icon        */
19 #define CONFIG_440              1               /* ... PPC440 family    */
20 #define CONFIG_440SPE           1               /* Specifc SPe support  */
21
22 #define CONFIG_SYS_TEXT_BASE    0xFFFA0000
23
24 #define CONFIG_SYS_CLK_FREQ     33333333        /* external freq to pll */
25 #define CONFIG_SYS_4xx_RESET_TYPE 0x2   /* use chip reset on this board */
26
27 /*
28  * Include common defines/options for all AMCC eval boards
29  */
30 #define CONFIG_HOSTNAME         icon
31 #include "amcc-common.h"
32
33 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init  */
34 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_early_init_r */
35
36 /*
37  * Base addresses -- Note these are effective addresses where the
38  * actual resources get mapped (not physical addresses)
39  */
40 #define CONFIG_SYS_FLASH_BASE   0xfc000000      /* later mapped to this addr */
41 #define CONFIG_SYS_ISRAM_BASE   0x90000000      /* internal SRAM        */
42
43 #define CONFIG_SYS_PCI_MEMBASE  0x80000000      /* mapped PCI memory    */
44 #define CONFIG_SYS_PCI_BASE     0xd0000000      /* internal PCI regs    */
45 #define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE
46
47 #define CONFIG_SYS_PCIE_MEMBASE 0xb0000000      /* mapped PCIe memory   */
48 #define CONFIG_SYS_PCIE_MEMSIZE 0x08000000      /* incr for PCIe port */
49 #define CONFIG_SYS_PCIE_BASE    0xe0000000      /* PCIe UTL regs */
50
51 #define CONFIG_SYS_PCIE0_CFGBASE        0xc0000000
52 #define CONFIG_SYS_PCIE1_CFGBASE        0xc1000000
53 #define CONFIG_SYS_PCIE2_CFGBASE        0xc2000000
54 #define CONFIG_SYS_PCIE0_XCFGBASE       0xc3000000
55 #define CONFIG_SYS_PCIE1_XCFGBASE       0xc3001000
56 #define CONFIG_SYS_PCIE2_XCFGBASE       0xc3002000
57
58 /* base address of inbound PCIe window */
59 #define CONFIG_SYS_PCIE_INBOUND_BASE    0x0000000000000000ULL
60
61 /* System RAM mapped to PCI space */
62 #define CONFIG_PCI_SYS_MEM_BUS  CONFIG_SYS_SDRAM_BASE
63 #define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
64 #define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
65
66 #define CONFIG_SYS_ACE_BASE             0xfb000000      /* Xilinx ACE CF */
67 #define CONFIG_SYS_ACE_BASE_PHYS_H      0x4
68 #define CONFIG_SYS_ACE_BASE_PHYS_L      0xfe000000
69
70 #define CONFIG_SYS_FLASH_SIZE           (64 << 20)
71 #define CONFIG_SYS_BOOT_BASE_ADDR       0xFF000000      /* EBC Boot Space */
72 #define CONFIG_SYS_FLASH_BASE_PHYS_H    0x4
73 #define CONFIG_SYS_FLASH_BASE_PHYS_L    0xEC000000
74 #define CONFIG_SYS_FLASH_BASE_PHYS      (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) | \
75                                          (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
76
77 /*
78  * Initial RAM & stack pointer (placed in internal SRAM)
79  */
80 #define CONFIG_SYS_TEMP_STACK_OCM       1
81 #define CONFIG_SYS_OCM_DATA_ADDR        CONFIG_SYS_ISRAM_BASE
82 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_ISRAM_BASE   /* Init RAM */
83 #define CONFIG_SYS_INIT_RAM_SIZE        0x2000          /* size of used area */
84
85 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
86                                          GENERATED_GBL_DATA_SIZE)
87 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
88
89 /*
90  * Serial Port
91  */
92 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
93 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
94
95 /*
96  * DDR2 SDRAM
97  */
98 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup     */
99 #define SPD_EEPROM_ADDRESS      { 0x51 } /* SPD I2C SPD addresses       */
100 #define CONFIG_DDR_ECC                  /* with ECC support             */
101 #define CONFIG_DDR_RQDC_FIXED   0x80000038 /* fixed value for RQDC      */
102
103 /*
104  * I2C
105  */
106 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0   100000
107
108 #define CONFIG_SYS_SPD_BUS_NUM  0       /* The I2C bus for SPD          */
109
110 #define CONFIG_SYS_I2C_MULTI_EEPROMS
111 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
112 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
113 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
114 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
115
116 /* I2C bootstrap EEPROM */
117 #define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR       0x50
118 #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET     0
119 #define CONFIG_4xx_CONFIG_BLOCKSIZE             8
120
121 /* I2C RTC */
122 #define CONFIG_RTC_M41T11
123 #define CONFIG_SYS_RTC_BUS_NUM  1       /* The I2C bus for RTC          */
124 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
125 #define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux       */
126
127 /*
128  * Video options
129  */
130 #define CONFIG_VIDEO
131
132 #ifdef CONFIG_VIDEO
133 #define CONFIG_VIDEO_SM501
134 #define CONFIG_VIDEO_SM501_32BPP
135 #define CONFIG_VIDEO_SM501_PCI
136 #define VIDEO_FB_LITTLE_ENDIAN
137 #define CONFIG_CFB_CONSOLE
138 #define CONFIG_VIDEO_LOGO
139 #define CONFIG_CONSOLE_EXTRA_INFO
140 #define CONFIG_VGA_AS_SINGLE_DEVICE
141 #define CONFIG_VIDEO_SW_CURSOR
142 #define CONFIG_VIDEO_BMP_RLE8
143 #define CONFIG_SPLASH_SCREEN
144 #define CFG_CONSOLE_IS_IN_ENV
145 #endif
146
147 /*
148  * Environment
149  */
150 #define CONFIG_ENV_IS_IN_FLASH  1       /* Environment uses flash       */
151
152 /*
153  * Default environment variables
154  */
155 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
156         CONFIG_AMCC_DEF_ENV                                             \
157         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
158         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
159         "kernel_addr=fc000000\0"                                        \
160         "fdt_addr=fc1e0000\0"                                           \
161         "ramdisk_addr=fc200000\0"                                       \
162         "pciconfighost=1\0"                                             \
163         "pcie_mode=RP:RP:RP\0"                                          \
164         ""
165
166 /*
167  * Commands additional to the ones defined in amcc-common.h
168  */
169 #define CONFIG_CMD_CHIP_CONFIG
170 #define CONFIG_CMD_DATE
171 #define CONFIG_CMD_EXT2
172 #define CONFIG_CMD_FAT
173 #define CONFIG_CMD_PCI
174 #define CONFIG_CMD_SDRAM
175 #define CONFIG_CMD_SNTP
176 #ifdef CONFIG_VIDEO
177 #define CONFIG_CMD_BMP
178 #endif
179
180 #define CONFIG_IBM_EMAC4_V4             /* 440SPe has this EMAC version */
181 #define CONFIG_PHY_ADDR         1       /* PHY address, See schematics  */
182 #define CONFIG_HAS_ETH0
183 #define CONFIG_PHY_RESET                /* reset phy upon startup       */
184 #define CONFIG_PHY_RESET_DELAY  1000
185 #define CONFIG_CIS8201_PHY              /* Enable RGMII mode for Cicada phy */
186 #define CONFIG_PHY_GIGE                 /* Include GbE speed/duplex det. */
187
188 /*
189  * FLASH related
190  */
191 #define CONFIG_SYS_FLASH_CFI            /* The flash is CFI compatible  */
192 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
193 #define CONFIG_SYS_FLASH_CFI_AMD_RESET  /* Use AMD (Spansion) reset cmd */
194 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method      */
195
196 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
197 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of banks  */
198 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors*/
199
200 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
201 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
202
203 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* use buffered writes  */
204 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* 'E' for empty sector */
205
206 #define CONFIG_ENV_SECT_SIZE    0x20000 /* size of one complete sector  */
207 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
208 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Env Sector     */
209
210 /* Address and size of Redundant Environment Sector     */
211 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
212 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
213
214 /*
215  * PCI stuff
216  */
217 /* General PCI */
218 #define CONFIG_PCI                      /* include pci support          */
219 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
220 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
221 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
222 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
223 #define CONFIG_PCI_BOOTDELAY    1000    /* enable pci bootdelay variable*/
224
225 /* Board-specific PCI */
226 #define CONFIG_SYS_PCI_TARGET_INIT      /* let board init pci target    */
227 #undef  CONFIG_SYS_PCI_MASTER_INIT
228
229 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014   /* IBM                  */
230 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe   /* Whatever             */
231
232 /*
233  * Xilinx System ACE support
234  */
235 #define CONFIG_SYSTEMACE                /* Enable SystemACE support     */
236 #define CONFIG_SYS_SYSTEMACE_WIDTH      16      /* Data bus width is 16 */
237 #define CONFIG_SYS_SYSTEMACE_BASE       CONFIG_SYS_ACE_BASE
238 #define CONFIG_DOS_PARTITION
239
240 /*
241  * External Bus Controller (EBC) Setup
242  */
243
244 /* Memory Bank 0 (Flash) initialization                                 */
245 #define CONFIG_SYS_EBC_PB0AP    (EBC_BXAP_BME_DISABLED      |           \
246                                  EBC_BXAP_TWT_ENCODE(7)     |           \
247                                  EBC_BXAP_BCE_DISABLE       |           \
248                                  EBC_BXAP_BCT_2TRANS        |           \
249                                  EBC_BXAP_CSN_ENCODE(0)     |           \
250                                  EBC_BXAP_OEN_ENCODE(0)     |           \
251                                  EBC_BXAP_WBN_ENCODE(0)     |           \
252                                  EBC_BXAP_WBF_ENCODE(0)     |           \
253                                  EBC_BXAP_TH_ENCODE(0)      |           \
254                                  EBC_BXAP_RE_DISABLED       |           \
255                                  EBC_BXAP_SOR_DELAYED       |           \
256                                  EBC_BXAP_BEM_WRITEONLY     |           \
257                                  EBC_BXAP_PEN_DISABLED)
258 #define CONFIG_SYS_EBC_PB0CR    (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \
259                                  EBC_BXCR_BS_64MB                    |  \
260                                  EBC_BXCR_BU_RW                      |  \
261                                  EBC_BXCR_BW_16BIT)
262
263 /* Memory Bank 1 (Xilinx System ACE controller) initialization          */
264 #define CONFIG_SYS_EBC_PB1AP    (EBC_BXAP_BME_DISABLED      |           \
265                                  EBC_BXAP_TWT_ENCODE(4)     |           \
266                                  EBC_BXAP_BCE_DISABLE       |           \
267                                  EBC_BXAP_BCT_2TRANS        |           \
268                                  EBC_BXAP_CSN_ENCODE(0)     |           \
269                                  EBC_BXAP_OEN_ENCODE(0)     |           \
270                                  EBC_BXAP_WBN_ENCODE(0)     |           \
271                                  EBC_BXAP_WBF_ENCODE(0)     |           \
272                                  EBC_BXAP_TH_ENCODE(0)      |           \
273                                  EBC_BXAP_RE_DISABLED       |           \
274                                  EBC_BXAP_SOR_NONDELAYED    |           \
275                                  EBC_BXAP_BEM_WRITEONLY     |           \
276                                  EBC_BXAP_PEN_DISABLED)
277 #define CONFIG_SYS_EBC_PB1CR    (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_ACE_BASE_PHYS_L) | \
278                                  EBC_BXCR_BS_1MB                    |   \
279                                  EBC_BXCR_BU_RW                     |   \
280                                  EBC_BXCR_BW_16BIT)
281
282 /*
283  * Initialize EBC CONFIG -
284  * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
285  * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
286  */
287 #define CONFIG_SYS_EBC_CFG      (EBC_CFG_LE_UNLOCK    | \
288                                  EBC_CFG_PTD_ENABLE   | \
289                                  EBC_CFG_RTC_16PERCLK | \
290                                  EBC_CFG_ATC_PREVIOUS | \
291                                  EBC_CFG_DTC_PREVIOUS | \
292                                  EBC_CFG_CTC_PREVIOUS | \
293                                  EBC_CFG_OEO_PREVIOUS | \
294                                  EBC_CFG_EMC_DEFAULT  | \
295                                  EBC_CFG_PME_DISABLE  | \
296                                  EBC_CFG_PR_16)
297
298 /*
299  * GPIO Setup
300  */
301 #define CONFIG_SYS_GPIO_PCIE_PRESENT0   17
302 #define CONFIG_SYS_GPIO_PCIE_PRESENT1   21
303 #define CONFIG_SYS_GPIO_PCIE_PRESENT2   23
304 #define CONFIG_SYS_GPIO_RS232_FORCEOFF  30
305
306 #define CONFIG_SYS_PFC0         (GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0) | \
307                                  GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1) | \
308                                  GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2) | \
309                                  GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF))
310 #define CONFIG_SYS_GPIO_OR      GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)
311 #define CONFIG_SYS_GPIO_TCR     GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)
312 #define CONFIG_SYS_GPIO_ODR     0
313
314 #endif  /* __CONFIG_H */