2 * (C) Copyright 2015 Linaro
4 * Peter Griffin <peter.griffin@linaro.org>
6 * Configuration for HiKey 96boards CE. Parts were derived from other ARM
9 * SPDX-License-Identifier: GPL-2.0+
15 #include <linux/sizes.h>
18 #define CONFIG_POWER_HI6553
20 #define CONFIG_REMAKE_ELF
22 #define CONFIG_SUPPORT_RAW_INITRD
24 /* Physical Memory Map */
26 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
27 #define CONFIG_SYS_TEXT_BASE 0x35000000
29 #define CONFIG_NR_DRAM_BANKS 6
30 #define PHYS_SDRAM_1 0x00000000
32 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
33 #define PHYS_SDRAM_1_SIZE 0x3EFFFFFF
35 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
37 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000
39 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
41 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
43 /* Generic Timer Definitions */
44 #define COUNTER_FREQUENCY 19000000
46 /* Generic Interrupt Controller Definitions */
47 #define GICD_BASE 0xf6801000
48 #define GICC_BASE 0xf6802000
50 /* Size of malloc() pool */
51 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
54 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
55 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
56 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
58 #define CONFIG_MISC_INIT_R
61 #define CONFIG_HIKEY_GPIO
63 /* SD/MMC configuration */
64 #define CONFIG_BOUNCE_BUFFER
66 /* Command line configuration */
68 #define CONFIG_MTD_PARTITIONS
71 #define CONFIG_BOOTP_BOOTFILESIZE
73 #include <config_distro_defaults.h>
75 /* Initial environment variables */
78 * Defines where the kernel and FDT will be put in RAM
81 #define BOOT_TARGET_DEVICES(func) \
85 #include <config_distro_bootcmd.h>
87 #define CONFIG_EXTRA_ENV_SETTINGS \
88 "kernel_name=Image\0" \
89 "kernel_addr_r=0x00080000\0" \
90 "fdtfile=hi6220-hikey.dtb\0" \
91 "fdt_addr_r=0x02000000\0" \
92 "fdt_high=0xffffffffffffffff\0" \
93 "initrd_high=0xffffffffffffffff\0" \
96 /* Preserve environment on sd card */
97 #define CONFIG_ENV_SIZE 0x1000
98 #define CONFIG_ENV_VARS_UBOOT_CONFIG
100 /* Monitor Command Prompt */
101 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
102 #define CONFIG_SYS_LONGHELP
103 #define CONFIG_CMDLINE_EDITING
104 #define CONFIG_SYS_MAXARGS 64 /* max command args */
106 #endif /* __HIKEY_H */