include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_BOARD_INIT
  12 #define CONFIG_SPL_NAND_SUPPORT
  13 #define CONFIG_SPL_MMC_SUPPORT
  14 #define CONFIG_SPL_POWER_SUPPORT
  15 /* Location in NAND to read U-Boot from */
  16 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  17
  18 /* Falcon Mode */
  19 #define CONFIG_CMD_SPL
  20 #define CONFIG_SPL_OS_BOOT
  21 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  22 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  23
  24 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  25 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  26 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  27
  28 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  29 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  30 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  31 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  32
  33 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  34 #include "mx6_common.h"
  35 #undef CONFIG_SPL_EXT_SUPPORT
  36
  37 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  38
  39 /* Serial ATAG */
  40 #define CONFIG_SERIAL_TAG
  41
  42 /* Size of malloc() pool */
  43 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  44
  45 /* Init Functions */
  46 #define CONFIG_BOARD_EARLY_INIT_F
  47 #define CONFIG_MISC_INIT_R
  48
  49 /* Driver Model */
  50 #ifndef CONFIG_SPL_BUILD
  51 #define CONFIG_DM_GPIO
  52 #define CONFIG_DM_THERMAL
  53 #endif
  54
  55 /* Thermal */
  56 #define CONFIG_IMX_THERMAL
  57
  58 /* Serial */
  59 #define CONFIG_MXC_UART
  60 #define CONFIG_MXC_UART_BASE           UART2_BASE
  61
  62 #ifdef CONFIG_SPI_FLASH
  63
  64 /* SPI */
  65 #ifdef CONFIG_CMD_SF
  66   #define CONFIG_MXC_SPI
  67   #define CONFIG_SPI_FLASH_MTD
  68   #define CONFIG_SPI_FLASH_BAR
  69   #define CONFIG_SF_DEFAULT_BUS              0
  70   #define CONFIG_SF_DEFAULT_CS               0
  71                                              /* GPIO 3-19 (21248) */
  72   #define CONFIG_SF_DEFAULT_SPEED            30000000
  73   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  74 #endif
  75
  76 #else
  77 /* Enable NAND support */
  78 #define CONFIG_CMD_NAND
  79 #define CONFIG_CMD_NAND_TRIMFFS
  80 #ifdef CONFIG_CMD_NAND
  81   #define CONFIG_NAND_MXS
  82   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  83   #define CONFIG_SYS_NAND_BASE          0x40000000
  84   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  85   #define CONFIG_SYS_NAND_ONFI_DETECTION
  86
  87   /* DMA stuff, needed for GPMI/MXS NAND support */
  88   #define CONFIG_APBH_DMA
  89   #define CONFIG_APBH_DMA_BURST
  90   #define CONFIG_APBH_DMA_BURST8
  91 #endif
  92
  93 #endif /* CONFIG_SPI_FLASH */
  94
  95 /* I2C Configs */
  96 #define CONFIG_SYS_I2C
  97 #define CONFIG_SYS_I2C_MXC
  98 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  99 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 100 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 101 #define CONFIG_SYS_I2C_SPEED            100000
 102 #define CONFIG_I2C_GSC                  0
 103 #define CONFIG_I2C_PMIC                 1
 104 #define CONFIG_I2C_EDID
 105
 106 /* MMC Configs */
 107 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 108 #define CONFIG_SYS_FSL_USDHC_NUM       1
 109
 110 /* Filesystem support */
 111 #define CONFIG_CMD_UBIFS
 112
 113 /*
 114  * SATA Configs
 115  */
 116 #define CONFIG_CMD_SATA
 117 #ifdef CONFIG_CMD_SATA
 118   #define CONFIG_DWC_AHSATA
 119   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 120   #define CONFIG_DWC_AHSATA_PORT_ID     0
 121   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 122   #define CONFIG_LBA48
 123   #define CONFIG_LIBATA
 124 #endif
 125
 126 /*
 127  * PCI express
 128  */
 129 #define CONFIG_CMD_PCI
 130 #ifdef CONFIG_CMD_PCI
 131 #define CONFIG_PCI
 132 #define CONFIG_PCI_PNP
 133 #define CONFIG_PCI_SCAN_SHOW
 134 #define CONFIG_PCI_FIXUP_DEV
 135 #define CONFIG_PCIE_IMX
 136 #endif
 137
 138 /*
 139  * PMIC
 140  */
 141 #define CONFIG_POWER
 142 #define CONFIG_POWER_I2C
 143 #define CONFIG_POWER_PFUZE100
 144 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 145 #define CONFIG_POWER_LTC3676
 146 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 147
 148 /* Various command support */
 149 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 150 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 151 #define CONFIG_CMD_GSC
 152 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 153 #define CONFIG_CMD_UBI
 154 #define CONFIG_RBTREE
 155
 156 /* Ethernet support */
 157 #define CONFIG_FEC_MXC
 158 #define CONFIG_MII
 159 #define IMX_FEC_BASE             ENET_BASE_ADDR
 160 #define CONFIG_FEC_XCV_TYPE      RGMII
 161 #define CONFIG_FEC_MXC_PHYADDR   0
 162 #define CONFIG_PHYLIB
 163 #define CONFIG_ARP_TIMEOUT       200UL
 164
 165 /* USB Configs */
 166 #define CONFIG_USB_EHCI
 167 #define CONFIG_USB_EHCI_MX6
 168 #define CONFIG_USB_STORAGE
 169 #define CONFIG_USB_HOST_ETHER
 170 #define CONFIG_USB_ETHER_ASIX
 171 #define CONFIG_USB_ETHER_SMSC95XX
 172 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 173 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 174 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 175 #define CONFIG_MXC_USB_FLAGS      0
 176 #define CONFIG_USB_KEYBOARD
 177 #define CONFIG_USBD_HS
 178 #define CONFIG_USB_ETHER
 179 #define CONFIG_USB_ETH_CDC
 180 #define CONFIG_NETCONSOLE
 181 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 182
 183 /* USB Mass Storage Gadget */
 184 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 185
 186 /* Framebuffer and LCD */
 187 #define CONFIG_VIDEO
 188 #define CONFIG_VIDEO_IPUV3
 189 #define CONFIG_CFB_CONSOLE
 190 #define CONFIG_VGA_AS_SINGLE_DEVICE
 191 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 192 #define CONFIG_VIDEO_BMP_RLE8
 193 #define CONFIG_SPLASH_SCREEN
 194 #define CONFIG_BMP_16BPP
 195 #define CONFIG_VIDEO_LOGO
 196 #define CONFIG_IPUV3_CLK          260000000
 197 #define CONFIG_CMD_HDMIDETECT
 198 #define CONFIG_CONSOLE_MUX
 199 #define CONFIG_IMX_HDMI
 200 #define CONFIG_IMX_VIDEO_SKIP
 201
 202 /* Miscellaneous configurable options */
 203 #define CONFIG_HWCONFIG
 204
 205 /* Print Buffer Size */
 206 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 207
 208 /* Memory configuration */
 209 #define CONFIG_SYS_MEMTEST_START       0x10000000
 210 #define CONFIG_SYS_MEMTEST_END         0x10010000
 211 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 212
 213 /* Physical Memory Map */
 214 #define CONFIG_NR_DRAM_BANKS           1
 215 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 216 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 217 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 218 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 219
 220 #define CONFIG_SYS_INIT_SP_OFFSET \
 221         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 222 #define CONFIG_SYS_INIT_SP_ADDR \
 223         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 224
 225 /*
 226  * MTD Command for mtdparts
 227  */
 228 #define CONFIG_LZO
 229 #define CONFIG_CMD_MTDPARTS
 230 #define CONFIG_MTD_DEVICE
 231 #define CONFIG_MTD_PARTITIONS
 232 #ifdef CONFIG_SPI_FLASH
 233 #define MTDIDS_DEFAULT    "nor0=nor"
 234 #define MTDPARTS_DEFAULT  \
 235         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 236 #else
 237 #define MTDIDS_DEFAULT    "nand0=nand"
 238 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 239 #endif
 240
 241 /* Persistent Environment Config */
 242 #ifdef CONFIG_SPI_FLASH
 243 #define CONFIG_ENV_IS_IN_SPI_FLASH
 244 #else
 245 #define CONFIG_ENV_IS_IN_NAND
 246 #endif
 247 #if defined(CONFIG_ENV_IS_IN_MMC)
 248   #define CONFIG_SYS_MMC_ENV_DEV         0
 249   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 250   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 251   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 252 #elif defined(CONFIG_ENV_IS_IN_NAND)
 253   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 254   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 255   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 256   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 257   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 258 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 259   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 260   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 261   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 262   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 263   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 264   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 265   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 266 #endif
 267
 268 /* Environment */
 269 #define CONFIG_IPADDR             192.168.1.1
 270 #define CONFIG_SERVERIP           192.168.1.146
 271 #define HWCONFIG_DEFAULT \
 272         "hwconfig=rs232;" \
 273         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 274
 275 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 276         "usb_pgood_delay=2000\0" \
 277         "console=ttymxc1\0" \
 278         "bootdevs=usb mmc sata flash\0" \
 279         HWCONFIG_DEFAULT \
 280         "video=\0" \
 281         \
 282         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 283         "mtdids=" MTDIDS_DEFAULT "\0" \
 284         \
 285         "fdt_high=0xffffffff\0" \
 286         "fdt_addr=0x18000000\0" \
 287         "initrd_high=0xffffffff\0" \
 288         "bootdir=boot\0" \
 289         "loadfdt=" \
 290                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 291                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 292                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 293                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 294                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 295                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 296                 "fi\0" \
 297         \
 298         "script=6x_bootscript-ventana\0" \
 299         "loadscript=" \
 300                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 301                         "source; " \
 302                 "fi\0" \
 303         \
 304         "uimage=uImage\0" \
 305         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 306         "mmc_boot=" \
 307                 "setenv fsload 'ext2load mmc 0:1'; " \
 308                 "mmc dev 0 && mmc rescan && " \
 309                 "setenv dtype mmc; run loadscript; " \
 310                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 311                         "setenv bootargs console=${console},${baudrate} " \
 312                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 313                                 "rootwait rw ${video} ${extra}; " \
 314                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 315                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 316                         "else " \
 317                                 "bootm; " \
 318                         "fi; " \
 319                 "fi\0" \
 320         \
 321         "sata_boot=" \
 322                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 323                 "setenv dtype sata; run loadscript; " \
 324                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 325                         "setenv bootargs console=${console},${baudrate} " \
 326                                 "root=/dev/sda1 rootfstype=ext4 " \
 327                                 "rootwait rw ${video} ${extra}; " \
 328                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 329                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 330                         "else " \
 331                                 "bootm; " \
 332                         "fi; " \
 333                 "fi\0" \
 334         "usb_boot=" \
 335                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 336                 "setenv dtype usb; run loadscript; " \
 337                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 338                         "setenv bootargs console=${console},${baudrate} " \
 339                                 "root=/dev/sda1 rootfstype=ext4 " \
 340                                 "rootwait rw ${video} ${extra}; " \
 341                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 342                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 343                         "else " \
 344                                 "bootm; " \
 345                         "fi; " \
 346                 "fi\0"
 347
 348 #ifdef CONFIG_SPI_FLASH
 349         #define CONFIG_EXTRA_ENV_SETTINGS \
 350         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 351         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 352         "image_uboot=ventana/u-boot_spi.imx\0" \
 353         \
 354         "spi_koffset=0x90000\0" \
 355         "spi_klen=0x200000\0" \
 356         \
 357         "spi_updateuboot=echo Updating uboot from " \
 358                 "${serverip}:${image_uboot}...; " \
 359                 "tftpboot ${loadaddr} ${image_uboot} && " \
 360                 "sf probe && sf erase 0 80000 && " \
 361                         "sf write ${loadaddr} 400 ${filesize}\0" \
 362         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 363                 "to ${spi_koffset} ...; " \
 364                 "tftp ${loadaddr} ${image_os} && " \
 365                 "sf probe && " \
 366                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 367         \
 368         "flash_boot=" \
 369                 "if sf probe && " \
 370                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 371                         "setenv bootargs console=${console},${baudrate} " \
 372                                 "root=/dev/mtdblock3 " \
 373                                 "rootfstype=squashfs,jffs2 " \
 374                                 "${video} ${extra}; " \
 375                         "bootm; " \
 376                 "fi\0"
 377 #else
 378         #define CONFIG_EXTRA_ENV_SETTINGS \
 379         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 380         \
 381         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 382         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 383                 "tftp ${loadaddr} ${image_rootfs} && " \
 384                 "nand erase.part rootfs && " \
 385                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 386         \
 387         "flash_boot=" \
 388                 "setenv fsload 'ubifsload'; " \
 389                 "ubi part rootfs; " \
 390                 "if ubi check boot; then " \
 391                         "ubifsmount ubi0:boot; " \
 392                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 393                                 "rootfstype=squashfs,ubifs; " \
 394                         "setenv bootdir; " \
 395                 "elif ubi check rootfs; then " \
 396                         "ubifsmount ubi0:rootfs; " \
 397                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 398                                 "rootfstype=ubifs; " \
 399                 "fi; " \
 400                 "setenv dtype nand; run loadscript; " \
 401                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 402                         "setenv bootargs console=${console},${baudrate} " \
 403                                 "root=${root} ${video} ${extra}; " \
 404                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 405                                 "ubifsumount; " \
 406                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 407                         "else " \
 408                                 "ubifsumount; bootm; " \
 409                         "fi; " \
 410                 "fi\0"
 411 #endif
 412
 413 #define CONFIG_BOOTCOMMAND \
 414         "for btype in ${bootdevs}; do " \
 415                 "echo; echo Attempting ${btype} boot...; " \
 416                 "if run ${btype}_boot; then; fi; " \
 417         "done"
 418
 419 /* Device Tree Support */
 420 #define CONFIG_FDT_FIXUP_PARTITIONS
 421
 422 #endif                         /* __CONFIG_H */