2 * Copyright (C) 2013 Gateworks Corporation
4 * SPDX-License-Identifier: GPL-2.0+
11 #define CONFIG_SPL_BOARD_INIT
12 /* Location in NAND to read U-Boot from */
13 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
16 #define CONFIG_CMD_SPL
17 #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
18 #define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K)
20 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
21 #define CONFIG_CMD_SPL_NAND_OFS (17 * SZ_1M)
22 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
24 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
25 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
26 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
27 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
29 #include "imx6_spl.h" /* common IMX6 SPL configuration */
30 #include "mx6_common.h"
31 #define CONFIG_DISPLAY_BOARDINFO_LATE
33 #define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
36 #define CONFIG_SERIAL_TAG
38 /* Size of malloc() pool */
39 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
42 #define CONFIG_BOARD_EARLY_INIT_F
43 #define CONFIG_MISC_INIT_R
46 #ifndef CONFIG_SPL_BUILD
47 #define CONFIG_DM_GPIO
48 #define CONFIG_DM_THERMAL
52 #define CONFIG_IMX_THERMAL
55 #define CONFIG_MXC_UART
56 #define CONFIG_MXC_UART_BASE UART2_BASE
58 #ifdef CONFIG_SPI_FLASH
62 #define CONFIG_MXC_SPI
63 #define CONFIG_SPI_FLASH_MTD
64 #define CONFIG_SPI_FLASH_BAR
65 #define CONFIG_SF_DEFAULT_BUS 0
66 #define CONFIG_SF_DEFAULT_CS 0
67 /* GPIO 3-19 (21248) */
68 #define CONFIG_SF_DEFAULT_SPEED 30000000
69 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
73 /* Enable NAND support */
74 #define CONFIG_CMD_NAND
75 #define CONFIG_CMD_NAND_TRIMFFS
76 #ifdef CONFIG_CMD_NAND
77 #define CONFIG_NAND_MXS
78 #define CONFIG_SYS_MAX_NAND_DEVICE 1
79 #define CONFIG_SYS_NAND_BASE 0x40000000
80 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
81 #define CONFIG_SYS_NAND_ONFI_DETECTION
83 /* DMA stuff, needed for GPMI/MXS NAND support */
84 #define CONFIG_APBH_DMA
85 #define CONFIG_APBH_DMA_BURST
86 #define CONFIG_APBH_DMA_BURST8
89 #endif /* CONFIG_SPI_FLASH */
92 #define CONFIG_SYS_I2C
93 #define CONFIG_SYS_I2C_MXC
94 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
95 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
96 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
97 #define CONFIG_SYS_I2C_SPEED 100000
98 #define CONFIG_I2C_GSC 0
99 #define CONFIG_I2C_PMIC 1
100 #define CONFIG_I2C_EDID
103 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
104 #define CONFIG_SYS_FSL_USDHC_NUM 1
106 /* Filesystem support */
107 #define CONFIG_CMD_UBIFS
112 #define CONFIG_CMD_SATA
113 #ifdef CONFIG_CMD_SATA
114 #define CONFIG_DWC_AHSATA
115 #define CONFIG_SYS_SATA_MAX_DEVICE 1
116 #define CONFIG_DWC_AHSATA_PORT_ID 0
117 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
119 #define CONFIG_LIBATA
125 #define CONFIG_CMD_PCI
126 #ifdef CONFIG_CMD_PCI
128 #define CONFIG_PCI_PNP
129 #define CONFIG_PCI_SCAN_SHOW
130 #define CONFIG_PCI_FIXUP_DEV
131 #define CONFIG_PCIE_IMX
138 #define CONFIG_POWER_I2C
139 #define CONFIG_POWER_PFUZE100
140 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
141 #define CONFIG_POWER_LTC3676
142 #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
144 /* Various command support */
145 #define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */
146 #define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */
147 #define CONFIG_CMD_GSC
148 #define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
149 #define CONFIG_RBTREE
151 /* Ethernet support */
152 #define CONFIG_FEC_MXC
154 #define IMX_FEC_BASE ENET_BASE_ADDR
155 #define CONFIG_FEC_XCV_TYPE RGMII
156 #define CONFIG_FEC_MXC_PHYADDR 0
157 #define CONFIG_PHYLIB
158 #define CONFIG_ARP_TIMEOUT 200UL
161 #define CONFIG_USB_EHCI
162 #define CONFIG_USB_EHCI_MX6
163 #define CONFIG_USB_HOST_ETHER
164 #define CONFIG_USB_ETHER_ASIX
165 #define CONFIG_USB_ETHER_SMSC95XX
166 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
167 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
168 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
169 #define CONFIG_MXC_USB_FLAGS 0
170 #define CONFIG_USBD_HS
171 #define CONFIG_USB_ETHER
172 #define CONFIG_USB_ETH_CDC
173 #define CONFIG_NETCONSOLE
174 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
176 /* USB Mass Storage Gadget */
177 #define CONFIG_USB_FUNCTION_MASS_STORAGE
179 /* Framebuffer and LCD */
180 #define CONFIG_VIDEO_IPUV3
181 #define CONFIG_VIDEO_LOGO
182 #define CONFIG_IPUV3_CLK 260000000
183 #define CONFIG_CMD_HDMIDETECT
184 #define CONFIG_IMX_HDMI
185 #define CONFIG_IMX_VIDEO_SKIP
186 #define CONFIG_VIDEO_BMP_LOGO
187 #define CONFIG_SPLASH_SCREEN_ALIGN
188 #define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
190 /* Miscellaneous configurable options */
191 #define CONFIG_HWCONFIG
192 #define CONFIG_PREBOOT
194 /* Print Buffer Size */
195 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
197 /* Memory configuration */
198 #define CONFIG_SYS_MEMTEST_START 0x10000000
199 #define CONFIG_SYS_MEMTEST_END 0x10010000
200 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
202 /* Physical Memory Map */
203 #define CONFIG_NR_DRAM_BANKS 1
204 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
205 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
206 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
207 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
209 #define CONFIG_SYS_INIT_SP_OFFSET \
210 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
211 #define CONFIG_SYS_INIT_SP_ADDR \
212 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
215 * MTD Command for mtdparts
218 #define CONFIG_CMD_MTDPARTS
219 #define CONFIG_MTD_DEVICE
220 #define CONFIG_MTD_PARTITIONS
221 #ifdef CONFIG_SPI_FLASH
222 #define MTDIDS_DEFAULT "nor0=nor"
223 #define MTDPARTS_DEFAULT \
224 "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
226 #define MTDIDS_DEFAULT "nand0=nand"
227 #define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
230 /* Persistent Environment Config */
231 #ifdef CONFIG_SPI_FLASH
232 #define CONFIG_ENV_IS_IN_SPI_FLASH
234 #define CONFIG_ENV_IS_IN_NAND
236 #if defined(CONFIG_ENV_IS_IN_MMC)
237 #define CONFIG_SYS_MMC_ENV_DEV 0
238 #define CONFIG_ENV_OFFSET (709 * SZ_1K)
239 #define CONFIG_ENV_SIZE (128 * SZ_1K)
240 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
241 #elif defined(CONFIG_ENV_IS_IN_NAND)
242 #define CONFIG_ENV_OFFSET (16 * SZ_1M)
243 #define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
244 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
245 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K))
246 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
247 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
248 #define CONFIG_ENV_OFFSET (512 * SZ_1K)
249 #define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
250 #define CONFIG_ENV_SIZE (8 * SZ_1K)
251 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
252 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
253 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
254 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
258 #define CONFIG_IPADDR 192.168.1.1
259 #define CONFIG_SERVERIP 192.168.1.146
261 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
264 "usb_pgood_delay=2000\0" \
265 "console=ttymxc1\0" \
266 "bootdevs=usb mmc sata flash\0" \
267 "hwconfig=_UNKNOWN_\0" \
270 "mtdparts=" MTDPARTS_DEFAULT "\0" \
271 "mtdids=" MTDIDS_DEFAULT "\0" \
275 "fdt_high=0xffffffff\0" \
276 "fdt_addr=0x18000000\0" \
277 "initrd_high=0xffffffff\0" \
279 "fdt addr ${fdt_addr}\0" \
282 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
283 "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
285 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
286 "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
288 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
289 "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
294 "script=6x_bootscript-ventana\0" \
296 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
297 "source ${loadaddr}; " \
301 "mmc_root=/dev/mmcblk0p1 rootfstype=${fs} rootwait rw\0" \
303 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
304 "mmc dev ${disk} && mmc rescan && " \
305 "setenv dtype mmc; run loadscript; " \
306 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
307 "setenv bootargs console=${console},${baudrate} " \
308 "root=/dev/mmcblk0p1 rootfstype=${fs} " \
309 "rootwait rw ${video} ${extra}; " \
310 "if run loadfdt; then " \
311 "bootm ${loadaddr} - ${fdt_addr}; " \
318 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
320 "setenv dtype sata; run loadscript; " \
321 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
322 "setenv bootargs console=${console},${baudrate} " \
323 "root=/dev/sda1 rootfstype=${fs} " \
324 "rootwait rw ${video} ${extra}; " \
325 "if run loadfdt; then " \
326 "bootm ${loadaddr} - ${fdt_addr}; " \
332 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
333 "usb start && usb dev ${disk} && " \
334 "setenv dtype usb; run loadscript; " \
335 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
336 "setenv bootargs console=${console},${baudrate} " \
337 "root=/dev/sda1 rootfstype=${fs} " \
338 "rootwait rw ${video} ${extra}; " \
339 "if run loadfdt; then " \
340 "bootm ${loadaddr} - ${fdt_addr}; " \
346 #ifdef CONFIG_SPI_FLASH
347 #define CONFIG_EXTRA_ENV_SETTINGS \
348 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
349 "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
350 "image_uboot=ventana/u-boot_spi.imx\0" \
352 "spi_koffset=0x90000\0" \
353 "spi_klen=0x200000\0" \
355 "spi_updateuboot=echo Updating uboot from " \
356 "${serverip}:${image_uboot}...; " \
357 "tftpboot ${loadaddr} ${image_uboot} && " \
358 "sf probe && sf erase 0 80000 && " \
359 "sf write ${loadaddr} 400 ${filesize}\0" \
360 "spi_update=echo Updating OS from ${serverip}:${image_os} " \
361 "to ${spi_koffset} ...; " \
362 "tftp ${loadaddr} ${image_os} && " \
364 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
368 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
369 "setenv bootargs console=${console},${baudrate} " \
370 "root=/dev/mtdblock3 " \
371 "rootfstype=squashfs,jffs2 " \
372 "${video} ${extra}; " \
376 #define CONFIG_EXTRA_ENV_SETTINGS \
377 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
379 "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
380 "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
381 "tftp ${loadaddr} ${image_rootfs} && " \
382 "nand erase.part rootfs && " \
383 "nand write ${loadaddr} rootfs ${filesize}\0" \
386 "setenv fsload 'ubifsload'; " \
387 "ubi part rootfs; " \
388 "if ubi check boot; then " \
389 "ubifsmount ubi0:boot; " \
390 "setenv root ubi0:rootfs ubi.mtd=2 " \
391 "rootfstype=squashfs,ubifs; " \
393 "elif ubi check rootfs; then " \
394 "ubifsmount ubi0:rootfs; " \
395 "setenv root ubi0:rootfs ubi.mtd=2 " \
396 "rootfstype=ubifs; " \
398 "setenv dtype nand; run loadscript; " \
399 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
400 "setenv bootargs console=${console},${baudrate} " \
401 "root=${root} ${video} ${extra}; " \
402 "if run loadfdt; then " \
404 "bootm ${loadaddr} - ${fdt_addr}; " \
406 "ubifsumount; bootm; " \
411 #define CONFIG_BOOTCOMMAND \
412 "for btype in ${bootdevs}; do " \
413 "echo; echo Attempting ${btype} boot...; " \
414 "if run ${btype}_boot; then; fi; " \
417 #endif /* __CONFIG_H */