include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 /* Location in NAND to read U-Boot from */
  12 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  13
  14 /* Falcon Mode */
  15 #define CONFIG_CMD_SPL
  16 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  17 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  18
  19 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  20 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  21 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  22
  23 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  24 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  25 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  26 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  27
  28 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  29 #include "mx6_common.h"
  30 #define CONFIG_DISPLAY_BOARDINFO_LATE
  31
  32 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  33
  34 /* Serial ATAG */
  35 #define CONFIG_SERIAL_TAG
  36
  37 /* Size of malloc() pool */
  38 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  39
  40 /* Init Functions */
  41 #define CONFIG_MISC_INIT_R
  42
  43 /* Driver Model */
  44 #ifndef CONFIG_SPL_BUILD
  45 #define CONFIG_DM_GPIO
  46 #define CONFIG_DM_THERMAL
  47 #endif
  48
  49 /* Thermal */
  50 #define CONFIG_IMX_THERMAL
  51
  52 /* Serial */
  53 #define CONFIG_MXC_UART
  54 #define CONFIG_MXC_UART_BASE           UART2_BASE
  55
  56 #ifdef CONFIG_SPI_FLASH
  57
  58 /* SPI */
  59 #ifdef CONFIG_CMD_SF
  60   #define CONFIG_MXC_SPI
  61   #define CONFIG_SPI_FLASH_MTD
  62   #define CONFIG_SPI_FLASH_BAR
  63   #define CONFIG_SF_DEFAULT_BUS              0
  64   #define CONFIG_SF_DEFAULT_CS               0
  65                                              /* GPIO 3-19 (21248) */
  66   #define CONFIG_SF_DEFAULT_SPEED            30000000
  67   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  68 #endif
  69
  70 #elif defined(CONFIG_SPL_NAND_SUPPORT)
  71 /* Enable NAND support */
  72 #ifdef CONFIG_CMD_NAND
  73   #define CONFIG_NAND_MXS
  74   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  75   #define CONFIG_SYS_NAND_BASE          0x40000000
  76   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  77   #define CONFIG_SYS_NAND_ONFI_DETECTION
  78
  79   /* DMA stuff, needed for GPMI/MXS NAND support */
  80   #define CONFIG_APBH_DMA
  81   #define CONFIG_APBH_DMA_BURST
  82   #define CONFIG_APBH_DMA_BURST8
  83 #endif
  84
  85 #endif /* CONFIG_SPI_FLASH */
  86
  87 /* I2C Configs */
  88 #define CONFIG_SYS_I2C
  89 #define CONFIG_SYS_I2C_MXC
  90 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  91 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  92 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  93 #define CONFIG_SYS_I2C_SPEED            100000
  94 #define CONFIG_I2C_GSC                  0
  95 #define CONFIG_I2C_EDID
  96
  97 /* MMC Configs */
  98 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  99
 100 /* eMMC Configs */
 101 #define CONFIG_SUPPORT_EMMC_BOOT
 102 #define CONFIG_SUPPORT_EMMC_RPMB
 103
 104 /*
 105  * SATA Configs
 106  */
 107 #ifdef CONFIG_CMD_SATA
 108   #define CONFIG_DWC_AHSATA
 109   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 110   #define CONFIG_DWC_AHSATA_PORT_ID     0
 111   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 112   #define CONFIG_LBA48
 113   #define CONFIG_LIBATA
 114 #endif
 115
 116 /*
 117  * PCI express
 118  */
 119 #ifdef CONFIG_CMD_PCI
 120 #define CONFIG_PCI_SCAN_SHOW
 121 #define CONFIG_PCI_FIXUP_DEV
 122 #define CONFIG_PCIE_IMX
 123 #endif
 124
 125 /*
 126  * PMIC
 127  */
 128 #define CONFIG_POWER
 129 #define CONFIG_POWER_I2C
 130 #define CONFIG_POWER_PFUZE100
 131 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 132 #define CONFIG_POWER_LTC3676
 133 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 134
 135 /* Various command support */
 136 #define CONFIG_CMD_UNZIP         /* gzwrite */
 137
 138 /* Ethernet support */
 139 #define CONFIG_FEC_MXC
 140 #define CONFIG_MII
 141 #define IMX_FEC_BASE             ENET_BASE_ADDR
 142 #define CONFIG_FEC_XCV_TYPE      RGMII
 143 #define CONFIG_FEC_MXC_PHYADDR   0
 144 #define CONFIG_ARP_TIMEOUT       200UL
 145
 146 /* USB Configs */
 147 #define CONFIG_USB_HOST_ETHER
 148 #define CONFIG_USB_ETHER_ASIX
 149 #define CONFIG_USB_ETHER_SMSC95XX
 150 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 151 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 152 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 153 #define CONFIG_MXC_USB_FLAGS      0
 154 #define CONFIG_USBD_HS
 155 #define CONFIG_USB_ETHER
 156 #define CONFIG_USB_ETH_CDC
 157 #define CONFIG_NETCONSOLE
 158 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 159
 160 /* USB Mass Storage Gadget */
 161 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 162
 163 /* Framebuffer and LCD */
 164 #define CONFIG_VIDEO_IPUV3
 165 #define CONFIG_VIDEO_LOGO
 166 #define CONFIG_IPUV3_CLK          260000000
 167 #define CONFIG_IMX_HDMI
 168 #define CONFIG_IMX_VIDEO_SKIP
 169 #define CONFIG_VIDEO_BMP_LOGO
 170 #define CONFIG_SPLASH_SCREEN_ALIGN
 171 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 172
 173 /* Miscellaneous configurable options */
 174 #define CONFIG_HWCONFIG
 175 #define CONFIG_PREBOOT
 176
 177 /* Print Buffer Size */
 178 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 179
 180 /* Memory configuration */
 181 #define CONFIG_SYS_MEMTEST_START       0x10000000
 182 #define CONFIG_SYS_MEMTEST_END         0x10010000
 183 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 184
 185 /* Physical Memory Map */
 186 #define CONFIG_NR_DRAM_BANKS           1
 187 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 188 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 189 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 190 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 191
 192 #define CONFIG_SYS_INIT_SP_OFFSET \
 193         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 194 #define CONFIG_SYS_INIT_SP_ADDR \
 195         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 196
 197 /*
 198  * MTD Command for mtdparts
 199  */
 200 #define CONFIG_MTD_DEVICE
 201 #define CONFIG_MTD_PARTITIONS
 202 #ifdef CONFIG_SPI_FLASH
 203 #define MTDIDS_DEFAULT    "nor0=nor"
 204 #define MTDPARTS_DEFAULT  \
 205         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 206 #else
 207 #define MTDIDS_DEFAULT    "nand0=nand"
 208 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 209 #endif
 210
 211 /* Persistent Environment Config */
 212 #if defined(CONFIG_ENV_IS_IN_MMC)
 213   #define CONFIG_SYS_MMC_ENV_DEV         0
 214   #define CONFIG_SYS_MMC_ENV_PART        1
 215   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 216   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 217   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 218 #elif defined(CONFIG_ENV_IS_IN_NAND)
 219   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 220   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 221   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 222   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 223   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 224 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 225   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 226   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 227   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 228   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 229   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 230   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 231   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 232 #endif
 233
 234 /* Environment */
 235 #define CONFIG_IPADDR             192.168.1.1
 236 #define CONFIG_SERVERIP           192.168.1.146
 237
 238 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 239         "pcidisable=1\0" \
 240         "splashpos=m,m\0" \
 241         "usb_pgood_delay=2000\0" \
 242         "console=ttymxc1\0" \
 243         "bootdevs=usb mmc sata flash\0" \
 244         "hwconfig=_UNKNOWN_\0" \
 245         "video=\0" \
 246         \
 247         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 248         "mtdids=" MTDIDS_DEFAULT "\0" \
 249         "disk=0\0" \
 250         "part=1\0" \
 251         \
 252         "fdt_high=0xffffffff\0" \
 253         "fdt_addr=0x18000000\0" \
 254         "initrd_high=0xffffffff\0" \
 255         "fixfdt=" \
 256                 "fdt addr ${fdt_addr}\0" \
 257         "bootdir=boot\0" \
 258         "loadfdt=" \
 259                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 260                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 261                         "run fixfdt; " \
 262                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 263                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 264                         "run fixfdt; " \
 265                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 266                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 267                         "run fixfdt; " \
 268                 "fi\0" \
 269         \
 270         "fs=ext4\0" \
 271         "script=6x_bootscript-ventana\0" \
 272         "loadscript=" \
 273                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 274                         "source ${loadaddr}; " \
 275                 "fi\0" \
 276         \
 277         "uimage=uImage\0" \
 278         "mmc_root=mmcblk0p1\0" \
 279         "mmc_boot=" \
 280                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 281                 "mmc dev ${disk} && mmc rescan && " \
 282                 "setenv dtype mmc; run loadscript; " \
 283                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 284                         "setenv bootargs console=${console},${baudrate} " \
 285                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 286                                 "rootwait rw ${video} ${extra}; " \
 287                         "if run loadfdt; then " \
 288                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 289                         "else " \
 290                                 "bootm; " \
 291                         "fi; " \
 292                 "fi\0" \
 293         \
 294         "sata_boot=" \
 295                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 296                 "sata init && " \
 297                 "setenv dtype sata; run loadscript; " \
 298                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 299                         "setenv bootargs console=${console},${baudrate} " \
 300                                 "root=/dev/sda1 rootfstype=${fs} " \
 301                                 "rootwait rw ${video} ${extra}; " \
 302                         "if run loadfdt; then " \
 303                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 304                         "else " \
 305                                 "bootm; " \
 306                         "fi; " \
 307                 "fi\0" \
 308         "usb_boot=" \
 309                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 310                 "usb start && usb dev ${disk} && " \
 311                 "setenv dtype usb; run loadscript; " \
 312                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 313                         "setenv bootargs console=${console},${baudrate} " \
 314                                 "root=/dev/sda1 rootfstype=${fs} " \
 315                                 "rootwait rw ${video} ${extra}; " \
 316                         "if run loadfdt; then " \
 317                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 318                         "else " \
 319                                 "bootm; " \
 320                         "fi; " \
 321                 "fi\0"
 322
 323 #ifdef CONFIG_SPI_FLASH
 324         #define CONFIG_EXTRA_ENV_SETTINGS \
 325         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 326         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 327         "image_uboot=ventana/u-boot_spi.imx\0" \
 328         \
 329         "spi_koffset=0x90000\0" \
 330         "spi_klen=0x200000\0" \
 331         \
 332         "spi_updateuboot=echo Updating uboot from " \
 333                 "${serverip}:${image_uboot}...; " \
 334                 "tftpboot ${loadaddr} ${image_uboot} && " \
 335                 "sf probe && sf erase 0 80000 && " \
 336                         "sf write ${loadaddr} 400 ${filesize}\0" \
 337         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 338                 "to ${spi_koffset} ...; " \
 339                 "tftp ${loadaddr} ${image_os} && " \
 340                 "sf probe && " \
 341                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 342         \
 343         "flash_boot=" \
 344                 "if sf probe && " \
 345                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 346                         "setenv bootargs console=${console},${baudrate} " \
 347                                 "root=/dev/mtdblock3 " \
 348                                 "rootfstype=squashfs,jffs2 " \
 349                                 "${video} ${extra}; " \
 350                         "bootm; " \
 351                 "fi\0"
 352 #else
 353         #define CONFIG_EXTRA_ENV_SETTINGS \
 354         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 355         \
 356         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 357         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 358                 "tftp ${loadaddr} ${image_rootfs} && " \
 359                 "nand erase.part rootfs && " \
 360                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 361         \
 362         "flash_boot=" \
 363                 "setenv fsload 'ubifsload'; " \
 364                 "ubi part rootfs; " \
 365                 "if ubi check boot; then " \
 366                         "ubifsmount ubi0:boot; " \
 367                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 368                                 "rootfstype=squashfs,ubifs; " \
 369                         "setenv bootdir; " \
 370                 "elif ubi check rootfs; then " \
 371                         "ubifsmount ubi0:rootfs; " \
 372                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 373                                 "rootfstype=ubifs; " \
 374                 "fi; " \
 375                 "setenv dtype nand; run loadscript; " \
 376                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 377                         "setenv bootargs console=${console},${baudrate} " \
 378                                 "root=${root} ${video} ${extra}; " \
 379                         "if run loadfdt; then " \
 380                                 "ubifsumount; " \
 381                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 382                         "else " \
 383                                 "ubifsumount; bootm; " \
 384                         "fi; " \
 385                 "fi\0"
 386 #endif
 387
 388 #define CONFIG_BOOTCOMMAND \
 389         "for btype in ${bootdevs}; do " \
 390                 "echo; echo Attempting ${btype} boot...; " \
 391                 "if run ${btype}_boot; then; fi; " \
 392         "done"
 393
 394 #endif                         /* __CONFIG_H */