include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 /* Location in NAND to read U-Boot from */
  12 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  13
  14 /* Falcon Mode */
  15 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  16
  17 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  18 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  19
  20 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  23 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  24
  25 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  26 #include "mx6_common.h"
  27 #define CONFIG_DISPLAY_BOARDINFO_LATE
  28
  29 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  30
  31 /* Serial ATAG */
  32 #define CONFIG_SERIAL_TAG
  33
  34 /* Size of malloc() pool */
  35 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  36
  37 /* Init Functions */
  38 #define CONFIG_MISC_INIT_R
  39
  40 /* Driver Model */
  41 #ifndef CONFIG_SPL_BUILD
  42 #define CONFIG_DM_GPIO
  43 #define CONFIG_DM_THERMAL
  44 #endif
  45
  46 /* Thermal */
  47 #define CONFIG_IMX_THERMAL
  48
  49 /* Serial */
  50 #define CONFIG_MXC_UART
  51 #define CONFIG_MXC_UART_BASE           UART2_BASE
  52
  53 #ifdef CONFIG_SPI_FLASH
  54
  55 /* SPI */
  56 #ifdef CONFIG_CMD_SF
  57   #define CONFIG_SPI_FLASH_MTD
  58   #define CONFIG_SPI_FLASH_BAR
  59   #define CONFIG_SF_DEFAULT_BUS              0
  60   #define CONFIG_SF_DEFAULT_CS               0
  61                                              /* GPIO 3-19 (21248) */
  62   #define CONFIG_SF_DEFAULT_SPEED            30000000
  63   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  64 #endif
  65
  66 #elif defined(CONFIG_SPL_NAND_SUPPORT)
  67 /* Enable NAND support */
  68 #ifdef CONFIG_CMD_NAND
  69   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  70   #define CONFIG_SYS_NAND_BASE          0x40000000
  71   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  72   #define CONFIG_SYS_NAND_ONFI_DETECTION
  73
  74   /* DMA stuff, needed for GPMI/MXS NAND support */
  75 #endif
  76
  77 #endif /* CONFIG_SPI_FLASH */
  78
  79 /* I2C Configs */
  80 #define CONFIG_SYS_I2C
  81 #define CONFIG_SYS_I2C_MXC
  82 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  83 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  84 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  85 #define CONFIG_SYS_I2C_SPEED            100000
  86 #define CONFIG_I2C_GSC                  0
  87 #define CONFIG_I2C_EDID
  88
  89 /* MMC Configs */
  90 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  91
  92 /* eMMC Configs */
  93 #define CONFIG_SUPPORT_EMMC_BOOT
  94 #define CONFIG_SUPPORT_EMMC_RPMB
  95
  96 /*
  97  * SATA Configs
  98  */
  99 #ifdef CONFIG_CMD_SATA
 100   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 101   #define CONFIG_DWC_AHSATA_PORT_ID     0
 102   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 103   #define CONFIG_LBA48
 104 #endif
 105
 106 /*
 107  * PCI express
 108  */
 109 #ifdef CONFIG_CMD_PCI
 110 #define CONFIG_PCI_SCAN_SHOW
 111 #define CONFIG_PCI_FIXUP_DEV
 112 #define CONFIG_PCIE_IMX
 113 #endif
 114
 115 /*
 116  * PMIC
 117  */
 118 #define CONFIG_POWER
 119 #define CONFIG_POWER_I2C
 120 #define CONFIG_POWER_PFUZE100
 121 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 122 #define CONFIG_POWER_LTC3676
 123 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 124
 125 /* Various command support */
 126 #define CONFIG_CMD_UNZIP         /* gzwrite */
 127
 128 /* Ethernet support */
 129 #define CONFIG_FEC_MXC
 130 #define CONFIG_MII
 131 #define IMX_FEC_BASE             ENET_BASE_ADDR
 132 #define CONFIG_FEC_XCV_TYPE      RGMII
 133 #define CONFIG_FEC_MXC_PHYADDR   0
 134 #define CONFIG_ARP_TIMEOUT       200UL
 135
 136 /* USB Configs */
 137 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 138 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 139 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 140 #define CONFIG_MXC_USB_FLAGS      0
 141 #define CONFIG_USBD_HS
 142 #define CONFIG_NETCONSOLE
 143
 144 /* Framebuffer and LCD */
 145 #define CONFIG_VIDEO_IPUV3
 146 #define CONFIG_VIDEO_LOGO
 147 #define CONFIG_IMX_HDMI
 148 #define CONFIG_IMX_VIDEO_SKIP
 149 #define CONFIG_VIDEO_BMP_LOGO
 150 #define CONFIG_SPLASH_SCREEN_ALIGN
 151 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 152
 153 /* Miscellaneous configurable options */
 154 #define CONFIG_HWCONFIG
 155 #define CONFIG_PREBOOT
 156
 157 /* Memory configuration */
 158 #define CONFIG_SYS_MEMTEST_START       0x10000000
 159 #define CONFIG_SYS_MEMTEST_END         0x10010000
 160 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 161
 162 /* Physical Memory Map */
 163 #define CONFIG_NR_DRAM_BANKS           1
 164 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 165 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 166 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 167 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 168
 169 #define CONFIG_SYS_INIT_SP_OFFSET \
 170         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 171 #define CONFIG_SYS_INIT_SP_ADDR \
 172         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 173
 174 /*
 175  * MTD Command for mtdparts
 176  */
 177 #define CONFIG_MTD_DEVICE
 178 #define CONFIG_MTD_PARTITIONS
 179
 180 /* Persistent Environment Config */
 181 #if defined(CONFIG_ENV_IS_IN_MMC)
 182   #define CONFIG_SYS_MMC_ENV_DEV         0
 183   #define CONFIG_SYS_MMC_ENV_PART        1
 184   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 185   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 186   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 187 #elif defined(CONFIG_ENV_IS_IN_NAND)
 188   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 189   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 190   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 191   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 192   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 193 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 194   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 195   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 196   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 197   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 198   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 199   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 200   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 201 #endif
 202
 203 /* Environment */
 204 #define CONFIG_IPADDR             192.168.1.1
 205 #define CONFIG_SERVERIP           192.168.1.146
 206
 207 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 208         "pcidisable=1\0" \
 209         "splashpos=m,m\0" \
 210         "usb_pgood_delay=2000\0" \
 211         "console=ttymxc1\0" \
 212         "bootdevs=usb mmc sata flash\0" \
 213         "hwconfig=_UNKNOWN_\0" \
 214         "video=\0" \
 215         \
 216         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 217         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 218         "disk=0\0" \
 219         "part=1\0" \
 220         \
 221         "fdt_high=0xffffffff\0" \
 222         "fdt_addr=0x18000000\0" \
 223         "initrd_high=0xffffffff\0" \
 224         "fixfdt=" \
 225                 "fdt addr ${fdt_addr}\0" \
 226         "bootdir=boot\0" \
 227         "loadfdt=" \
 228                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 229                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 230                         "run fixfdt; " \
 231                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 232                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 233                         "run fixfdt; " \
 234                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 235                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 236                         "run fixfdt; " \
 237                 "fi\0" \
 238         \
 239         "fs=ext4\0" \
 240         "script=6x_bootscript-ventana\0" \
 241         "loadscript=" \
 242                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 243                         "source ${loadaddr}; " \
 244                 "fi\0" \
 245         \
 246         "uimage=uImage\0" \
 247         "mmc_root=mmcblk0p1\0" \
 248         "mmc_boot=" \
 249                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 250                 "mmc dev ${disk} && mmc rescan && " \
 251                 "setenv dtype mmc; run loadscript; " \
 252                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 253                         "setenv bootargs console=${console},${baudrate} " \
 254                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 255                                 "rootwait rw ${video} ${extra}; " \
 256                         "if run loadfdt; then " \
 257                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 258                         "else " \
 259                                 "bootm; " \
 260                         "fi; " \
 261                 "fi\0" \
 262         \
 263         "sata_boot=" \
 264                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 265                 "sata init && " \
 266                 "setenv dtype sata; run loadscript; " \
 267                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 268                         "setenv bootargs console=${console},${baudrate} " \
 269                                 "root=/dev/sda1 rootfstype=${fs} " \
 270                                 "rootwait rw ${video} ${extra}; " \
 271                         "if run loadfdt; then " \
 272                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 273                         "else " \
 274                                 "bootm; " \
 275                         "fi; " \
 276                 "fi\0" \
 277         "usb_boot=" \
 278                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 279                 "usb start && usb dev ${disk} && " \
 280                 "setenv dtype usb; run loadscript; " \
 281                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 282                         "setenv bootargs console=${console},${baudrate} " \
 283                                 "root=/dev/sda1 rootfstype=${fs} " \
 284                                 "rootwait rw ${video} ${extra}; " \
 285                         "if run loadfdt; then " \
 286                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 287                         "else " \
 288                                 "bootm; " \
 289                         "fi; " \
 290                 "fi\0"
 291
 292 #ifdef CONFIG_SPI_FLASH
 293         #define CONFIG_EXTRA_ENV_SETTINGS \
 294         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 295         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 296         "image_uboot=ventana/u-boot_spi.imx\0" \
 297         \
 298         "spi_koffset=0x90000\0" \
 299         "spi_klen=0x200000\0" \
 300         \
 301         "spi_updateuboot=echo Updating uboot from " \
 302                 "${serverip}:${image_uboot}...; " \
 303                 "tftpboot ${loadaddr} ${image_uboot} && " \
 304                 "sf probe && sf erase 0 80000 && " \
 305                         "sf write ${loadaddr} 400 ${filesize}\0" \
 306         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 307                 "to ${spi_koffset} ...; " \
 308                 "tftp ${loadaddr} ${image_os} && " \
 309                 "sf probe && " \
 310                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 311         \
 312         "flash_boot=" \
 313                 "if sf probe && " \
 314                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 315                         "setenv bootargs console=${console},${baudrate} " \
 316                                 "root=/dev/mtdblock3 " \
 317                                 "rootfstype=squashfs,jffs2 " \
 318                                 "${video} ${extra}; " \
 319                         "bootm; " \
 320                 "fi\0"
 321 #else
 322         #define CONFIG_EXTRA_ENV_SETTINGS \
 323         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 324         \
 325         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 326         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 327                 "tftp ${loadaddr} ${image_rootfs} && " \
 328                 "nand erase.part rootfs && " \
 329                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 330         \
 331         "flash_boot=" \
 332                 "setenv fsload 'ubifsload'; " \
 333                 "ubi part rootfs; " \
 334                 "if ubi check boot; then " \
 335                         "ubifsmount ubi0:boot; " \
 336                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 337                                 "rootfstype=squashfs,ubifs; " \
 338                         "setenv bootdir; " \
 339                 "elif ubi check rootfs; then " \
 340                         "ubifsmount ubi0:rootfs; " \
 341                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 342                                 "rootfstype=ubifs; " \
 343                 "fi; " \
 344                 "setenv dtype nand; run loadscript; " \
 345                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 346                         "setenv bootargs console=${console},${baudrate} " \
 347                                 "root=${root} ${video} ${extra}; " \
 348                         "if run loadfdt; then " \
 349                                 "ubifsumount; " \
 350                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 351                         "else " \
 352                                 "ubifsumount; bootm; " \
 353                         "fi; " \
 354                 "fi\0"
 355 #endif
 356
 357 #define CONFIG_BOOTCOMMAND \
 358         "for btype in ${bootdevs}; do " \
 359                 "echo; echo Attempting ${btype} boot...; " \
 360                 "if run ${btype}_boot; then; fi; " \
 361         "done"
 362
 363 #endif                         /* __CONFIG_H */