include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 /* Location in NAND to read U-Boot from */
  12 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  13
  14 /* Falcon Mode */
  15 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  16
  17 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  18 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  19
  20 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  23 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  24
  25 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  26 #include "mx6_common.h"
  27 #define CONFIG_DISPLAY_BOARDINFO_LATE
  28
  29 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  30
  31 /* Serial ATAG */
  32 #define CONFIG_SERIAL_TAG
  33
  34 /* Size of malloc() pool */
  35 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  36
  37 /* Init Functions */
  38 #define CONFIG_MISC_INIT_R
  39
  40 /* Driver Model */
  41 #ifndef CONFIG_SPL_BUILD
  42 #define CONFIG_DM_GPIO
  43 #define CONFIG_DM_THERMAL
  44 #endif
  45
  46 /* Thermal */
  47 #define CONFIG_IMX_THERMAL
  48
  49 /* Serial */
  50 #define CONFIG_MXC_UART
  51 #define CONFIG_MXC_UART_BASE           UART2_BASE
  52
  53 #ifdef CONFIG_SPI_FLASH
  54
  55 /* SPI */
  56 #ifdef CONFIG_CMD_SF
  57   #define CONFIG_MXC_SPI
  58   #define CONFIG_SPI_FLASH_MTD
  59   #define CONFIG_SPI_FLASH_BAR
  60   #define CONFIG_SF_DEFAULT_BUS              0
  61   #define CONFIG_SF_DEFAULT_CS               0
  62                                              /* GPIO 3-19 (21248) */
  63   #define CONFIG_SF_DEFAULT_SPEED            30000000
  64   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  65 #endif
  66
  67 #elif defined(CONFIG_SPL_NAND_SUPPORT)
  68 /* Enable NAND support */
  69 #ifdef CONFIG_CMD_NAND
  70   #define CONFIG_NAND_MXS
  71   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  72   #define CONFIG_SYS_NAND_BASE          0x40000000
  73   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  74   #define CONFIG_SYS_NAND_ONFI_DETECTION
  75
  76   /* DMA stuff, needed for GPMI/MXS NAND support */
  77   #define CONFIG_APBH_DMA
  78   #define CONFIG_APBH_DMA_BURST
  79   #define CONFIG_APBH_DMA_BURST8
  80 #endif
  81
  82 #endif /* CONFIG_SPI_FLASH */
  83
  84 /* I2C Configs */
  85 #define CONFIG_SYS_I2C
  86 #define CONFIG_SYS_I2C_MXC
  87 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  88 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  89 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  90 #define CONFIG_SYS_I2C_SPEED            100000
  91 #define CONFIG_I2C_GSC                  0
  92 #define CONFIG_I2C_EDID
  93
  94 /* MMC Configs */
  95 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  96
  97 /* eMMC Configs */
  98 #define CONFIG_SUPPORT_EMMC_BOOT
  99 #define CONFIG_SUPPORT_EMMC_RPMB
 100
 101 /*
 102  * SATA Configs
 103  */
 104 #ifdef CONFIG_CMD_SATA
 105   #define CONFIG_DWC_AHSATA
 106   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 107   #define CONFIG_DWC_AHSATA_PORT_ID     0
 108   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 109   #define CONFIG_LBA48
 110   #define CONFIG_LIBATA
 111 #endif
 112
 113 /*
 114  * PCI express
 115  */
 116 #ifdef CONFIG_CMD_PCI
 117 #define CONFIG_PCI_SCAN_SHOW
 118 #define CONFIG_PCI_FIXUP_DEV
 119 #define CONFIG_PCIE_IMX
 120 #endif
 121
 122 /*
 123  * PMIC
 124  */
 125 #define CONFIG_POWER
 126 #define CONFIG_POWER_I2C
 127 #define CONFIG_POWER_PFUZE100
 128 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 129 #define CONFIG_POWER_LTC3676
 130 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 131
 132 /* Various command support */
 133 #define CONFIG_CMD_UNZIP         /* gzwrite */
 134
 135 /* Ethernet support */
 136 #define CONFIG_FEC_MXC
 137 #define CONFIG_MII
 138 #define IMX_FEC_BASE             ENET_BASE_ADDR
 139 #define CONFIG_FEC_XCV_TYPE      RGMII
 140 #define CONFIG_FEC_MXC_PHYADDR   0
 141 #define CONFIG_ARP_TIMEOUT       200UL
 142
 143 /* USB Configs */
 144 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 145 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 146 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 147 #define CONFIG_MXC_USB_FLAGS      0
 148 #define CONFIG_USBD_HS
 149 #define CONFIG_NETCONSOLE
 150
 151 /* USB Mass Storage Gadget */
 152 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 153
 154 /* Framebuffer and LCD */
 155 #define CONFIG_VIDEO_IPUV3
 156 #define CONFIG_VIDEO_LOGO
 157 #define CONFIG_IMX_HDMI
 158 #define CONFIG_IMX_VIDEO_SKIP
 159 #define CONFIG_VIDEO_BMP_LOGO
 160 #define CONFIG_SPLASH_SCREEN_ALIGN
 161 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 162
 163 /* Miscellaneous configurable options */
 164 #define CONFIG_HWCONFIG
 165 #define CONFIG_PREBOOT
 166
 167 /* Memory configuration */
 168 #define CONFIG_SYS_MEMTEST_START       0x10000000
 169 #define CONFIG_SYS_MEMTEST_END         0x10010000
 170 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 171
 172 /* Physical Memory Map */
 173 #define CONFIG_NR_DRAM_BANKS           1
 174 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 175 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 176 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 177 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 178
 179 #define CONFIG_SYS_INIT_SP_OFFSET \
 180         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 181 #define CONFIG_SYS_INIT_SP_ADDR \
 182         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 183
 184 /*
 185  * MTD Command for mtdparts
 186  */
 187 #define CONFIG_MTD_DEVICE
 188 #define CONFIG_MTD_PARTITIONS
 189
 190 /* Persistent Environment Config */
 191 #if defined(CONFIG_ENV_IS_IN_MMC)
 192   #define CONFIG_SYS_MMC_ENV_DEV         0
 193   #define CONFIG_SYS_MMC_ENV_PART        1
 194   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 195   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 196   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 197 #elif defined(CONFIG_ENV_IS_IN_NAND)
 198   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 199   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 200   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 201   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 202   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 203 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 204   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 205   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 206   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 207   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 208   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 209   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 210   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 211 #endif
 212
 213 /* Environment */
 214 #define CONFIG_IPADDR             192.168.1.1
 215 #define CONFIG_SERVERIP           192.168.1.146
 216
 217 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 218         "pcidisable=1\0" \
 219         "splashpos=m,m\0" \
 220         "usb_pgood_delay=2000\0" \
 221         "console=ttymxc1\0" \
 222         "bootdevs=usb mmc sata flash\0" \
 223         "hwconfig=_UNKNOWN_\0" \
 224         "video=\0" \
 225         \
 226         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 227         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 228         "disk=0\0" \
 229         "part=1\0" \
 230         \
 231         "fdt_high=0xffffffff\0" \
 232         "fdt_addr=0x18000000\0" \
 233         "initrd_high=0xffffffff\0" \
 234         "fixfdt=" \
 235                 "fdt addr ${fdt_addr}\0" \
 236         "bootdir=boot\0" \
 237         "loadfdt=" \
 238                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 239                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 240                         "run fixfdt; " \
 241                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 242                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 243                         "run fixfdt; " \
 244                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 245                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 246                         "run fixfdt; " \
 247                 "fi\0" \
 248         \
 249         "fs=ext4\0" \
 250         "script=6x_bootscript-ventana\0" \
 251         "loadscript=" \
 252                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 253                         "source ${loadaddr}; " \
 254                 "fi\0" \
 255         \
 256         "uimage=uImage\0" \
 257         "mmc_root=mmcblk0p1\0" \
 258         "mmc_boot=" \
 259                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 260                 "mmc dev ${disk} && mmc rescan && " \
 261                 "setenv dtype mmc; run loadscript; " \
 262                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 263                         "setenv bootargs console=${console},${baudrate} " \
 264                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 265                                 "rootwait rw ${video} ${extra}; " \
 266                         "if run loadfdt; then " \
 267                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 268                         "else " \
 269                                 "bootm; " \
 270                         "fi; " \
 271                 "fi\0" \
 272         \
 273         "sata_boot=" \
 274                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 275                 "sata init && " \
 276                 "setenv dtype sata; run loadscript; " \
 277                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 278                         "setenv bootargs console=${console},${baudrate} " \
 279                                 "root=/dev/sda1 rootfstype=${fs} " \
 280                                 "rootwait rw ${video} ${extra}; " \
 281                         "if run loadfdt; then " \
 282                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 283                         "else " \
 284                                 "bootm; " \
 285                         "fi; " \
 286                 "fi\0" \
 287         "usb_boot=" \
 288                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 289                 "usb start && usb dev ${disk} && " \
 290                 "setenv dtype usb; run loadscript; " \
 291                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 292                         "setenv bootargs console=${console},${baudrate} " \
 293                                 "root=/dev/sda1 rootfstype=${fs} " \
 294                                 "rootwait rw ${video} ${extra}; " \
 295                         "if run loadfdt; then " \
 296                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 297                         "else " \
 298                                 "bootm; " \
 299                         "fi; " \
 300                 "fi\0"
 301
 302 #ifdef CONFIG_SPI_FLASH
 303         #define CONFIG_EXTRA_ENV_SETTINGS \
 304         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 305         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 306         "image_uboot=ventana/u-boot_spi.imx\0" \
 307         \
 308         "spi_koffset=0x90000\0" \
 309         "spi_klen=0x200000\0" \
 310         \
 311         "spi_updateuboot=echo Updating uboot from " \
 312                 "${serverip}:${image_uboot}...; " \
 313                 "tftpboot ${loadaddr} ${image_uboot} && " \
 314                 "sf probe && sf erase 0 80000 && " \
 315                         "sf write ${loadaddr} 400 ${filesize}\0" \
 316         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 317                 "to ${spi_koffset} ...; " \
 318                 "tftp ${loadaddr} ${image_os} && " \
 319                 "sf probe && " \
 320                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 321         \
 322         "flash_boot=" \
 323                 "if sf probe && " \
 324                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 325                         "setenv bootargs console=${console},${baudrate} " \
 326                                 "root=/dev/mtdblock3 " \
 327                                 "rootfstype=squashfs,jffs2 " \
 328                                 "${video} ${extra}; " \
 329                         "bootm; " \
 330                 "fi\0"
 331 #else
 332         #define CONFIG_EXTRA_ENV_SETTINGS \
 333         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 334         \
 335         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 336         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 337                 "tftp ${loadaddr} ${image_rootfs} && " \
 338                 "nand erase.part rootfs && " \
 339                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 340         \
 341         "flash_boot=" \
 342                 "setenv fsload 'ubifsload'; " \
 343                 "ubi part rootfs; " \
 344                 "if ubi check boot; then " \
 345                         "ubifsmount ubi0:boot; " \
 346                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 347                                 "rootfstype=squashfs,ubifs; " \
 348                         "setenv bootdir; " \
 349                 "elif ubi check rootfs; then " \
 350                         "ubifsmount ubi0:rootfs; " \
 351                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 352                                 "rootfstype=ubifs; " \
 353                 "fi; " \
 354                 "setenv dtype nand; run loadscript; " \
 355                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 356                         "setenv bootargs console=${console},${baudrate} " \
 357                                 "root=${root} ${video} ${extra}; " \
 358                         "if run loadfdt; then " \
 359                                 "ubifsumount; " \
 360                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 361                         "else " \
 362                                 "ubifsumount; bootm; " \
 363                         "fi; " \
 364                 "fi\0"
 365 #endif
 366
 367 #define CONFIG_BOOTCOMMAND \
 368         "for btype in ${bootdevs}; do " \
 369                 "echo; echo Attempting ${btype} boot...; " \
 370                 "if run ${btype}_boot; then; fi; " \
 371         "done"
 372
 373 #endif                         /* __CONFIG_H */