2 * Copyright (C) 2013 Gateworks Corporation
4 * SPDX-License-Identifier: GPL-2.0+
11 /* Location in NAND to read U-Boot from */
12 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
15 #define CONFIG_CMD_SPL
16 #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
17 #define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K)
19 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
20 #define CONFIG_CMD_SPL_NAND_OFS (17 * SZ_1M)
21 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
23 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
24 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
25 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
26 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
28 #include "imx6_spl.h" /* common IMX6 SPL configuration */
29 #include "mx6_common.h"
30 #define CONFIG_DISPLAY_BOARDINFO_LATE
32 #define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
35 #define CONFIG_SERIAL_TAG
37 /* Size of malloc() pool */
38 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
41 #define CONFIG_MISC_INIT_R
44 #ifndef CONFIG_SPL_BUILD
45 #define CONFIG_DM_GPIO
46 #define CONFIG_DM_THERMAL
50 #define CONFIG_IMX_THERMAL
53 #define CONFIG_MXC_UART
54 #define CONFIG_MXC_UART_BASE UART2_BASE
56 #ifdef CONFIG_SPI_FLASH
60 #define CONFIG_MXC_SPI
61 #define CONFIG_SPI_FLASH_MTD
62 #define CONFIG_SPI_FLASH_BAR
63 #define CONFIG_SF_DEFAULT_BUS 0
64 #define CONFIG_SF_DEFAULT_CS 0
65 /* GPIO 3-19 (21248) */
66 #define CONFIG_SF_DEFAULT_SPEED 30000000
67 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
70 #elif defined(CONFIG_SPL_NAND_SUPPORT)
71 /* Enable NAND support */
72 #ifdef CONFIG_CMD_NAND
73 #define CONFIG_NAND_MXS
74 #define CONFIG_SYS_MAX_NAND_DEVICE 1
75 #define CONFIG_SYS_NAND_BASE 0x40000000
76 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
77 #define CONFIG_SYS_NAND_ONFI_DETECTION
79 /* DMA stuff, needed for GPMI/MXS NAND support */
80 #define CONFIG_APBH_DMA
81 #define CONFIG_APBH_DMA_BURST
82 #define CONFIG_APBH_DMA_BURST8
85 #endif /* CONFIG_SPI_FLASH */
88 #define CONFIG_SYS_I2C
89 #define CONFIG_SYS_I2C_MXC
90 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
91 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
92 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
93 #define CONFIG_SYS_I2C_SPEED 100000
94 #define CONFIG_I2C_GSC 0
95 #define CONFIG_I2C_EDID
98 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
101 #define CONFIG_SUPPORT_EMMC_BOOT
102 #define CONFIG_SUPPORT_EMMC_RPMB
107 #ifdef CONFIG_CMD_SATA
108 #define CONFIG_DWC_AHSATA
109 #define CONFIG_SYS_SATA_MAX_DEVICE 1
110 #define CONFIG_DWC_AHSATA_PORT_ID 0
111 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
113 #define CONFIG_LIBATA
119 #define CONFIG_CMD_PCI
120 #ifdef CONFIG_CMD_PCI
121 #define CONFIG_PCI_SCAN_SHOW
122 #define CONFIG_PCI_FIXUP_DEV
123 #define CONFIG_PCIE_IMX
130 #define CONFIG_POWER_I2C
131 #define CONFIG_POWER_PFUZE100
132 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
133 #define CONFIG_POWER_LTC3676
134 #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
136 /* Various command support */
137 #define CONFIG_CMD_UNZIP /* gzwrite */
139 /* Ethernet support */
140 #define CONFIG_FEC_MXC
142 #define IMX_FEC_BASE ENET_BASE_ADDR
143 #define CONFIG_FEC_XCV_TYPE RGMII
144 #define CONFIG_FEC_MXC_PHYADDR 0
145 #define CONFIG_ARP_TIMEOUT 200UL
148 #define CONFIG_USB_HOST_ETHER
149 #define CONFIG_USB_ETHER_ASIX
150 #define CONFIG_USB_ETHER_SMSC95XX
151 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
152 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
153 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
154 #define CONFIG_MXC_USB_FLAGS 0
155 #define CONFIG_USBD_HS
156 #define CONFIG_USB_ETHER
157 #define CONFIG_USB_ETH_CDC
158 #define CONFIG_NETCONSOLE
159 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
161 /* USB Mass Storage Gadget */
162 #define CONFIG_USB_FUNCTION_MASS_STORAGE
164 /* Framebuffer and LCD */
165 #define CONFIG_VIDEO_IPUV3
166 #define CONFIG_VIDEO_LOGO
167 #define CONFIG_IPUV3_CLK 260000000
168 #define CONFIG_IMX_HDMI
169 #define CONFIG_IMX_VIDEO_SKIP
170 #define CONFIG_VIDEO_BMP_LOGO
171 #define CONFIG_SPLASH_SCREEN_ALIGN
172 #define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
174 /* Miscellaneous configurable options */
175 #define CONFIG_HWCONFIG
176 #define CONFIG_PREBOOT
178 /* Print Buffer Size */
179 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
181 /* Memory configuration */
182 #define CONFIG_SYS_MEMTEST_START 0x10000000
183 #define CONFIG_SYS_MEMTEST_END 0x10010000
184 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
186 /* Physical Memory Map */
187 #define CONFIG_NR_DRAM_BANKS 1
188 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
189 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
190 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
191 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
193 #define CONFIG_SYS_INIT_SP_OFFSET \
194 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
195 #define CONFIG_SYS_INIT_SP_ADDR \
196 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
199 * MTD Command for mtdparts
201 #define CONFIG_MTD_DEVICE
202 #define CONFIG_MTD_PARTITIONS
203 #ifdef CONFIG_SPI_FLASH
204 #define MTDIDS_DEFAULT "nor0=nor"
205 #define MTDPARTS_DEFAULT \
206 "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
208 #define MTDIDS_DEFAULT "nand0=nand"
209 #define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
212 /* Persistent Environment Config */
213 #if defined(CONFIG_ENV_IS_IN_MMC)
214 #define CONFIG_SYS_MMC_ENV_DEV 0
215 #define CONFIG_SYS_MMC_ENV_PART 1
216 #define CONFIG_ENV_OFFSET (709 * SZ_1K)
217 #define CONFIG_ENV_SIZE (128 * SZ_1K)
218 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
219 #elif defined(CONFIG_ENV_IS_IN_NAND)
220 #define CONFIG_ENV_OFFSET (16 * SZ_1M)
221 #define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
222 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
223 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K))
224 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
225 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
226 #define CONFIG_ENV_OFFSET (512 * SZ_1K)
227 #define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
228 #define CONFIG_ENV_SIZE (8 * SZ_1K)
229 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
230 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
231 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
232 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
236 #define CONFIG_IPADDR 192.168.1.1
237 #define CONFIG_SERVERIP 192.168.1.146
239 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
242 "usb_pgood_delay=2000\0" \
243 "console=ttymxc1\0" \
244 "bootdevs=usb mmc sata flash\0" \
245 "hwconfig=_UNKNOWN_\0" \
248 "mtdparts=" MTDPARTS_DEFAULT "\0" \
249 "mtdids=" MTDIDS_DEFAULT "\0" \
253 "fdt_high=0xffffffff\0" \
254 "fdt_addr=0x18000000\0" \
255 "initrd_high=0xffffffff\0" \
257 "fdt addr ${fdt_addr}\0" \
260 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
261 "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
263 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
264 "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
266 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
267 "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
272 "script=6x_bootscript-ventana\0" \
274 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
275 "source ${loadaddr}; " \
279 "mmc_root=mmcblk0p1\0" \
281 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
282 "mmc dev ${disk} && mmc rescan && " \
283 "setenv dtype mmc; run loadscript; " \
284 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
285 "setenv bootargs console=${console},${baudrate} " \
286 "root=/dev/${mmc_root} rootfstype=${fs} " \
287 "rootwait rw ${video} ${extra}; " \
288 "if run loadfdt; then " \
289 "bootm ${loadaddr} - ${fdt_addr}; " \
296 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
298 "setenv dtype sata; run loadscript; " \
299 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
300 "setenv bootargs console=${console},${baudrate} " \
301 "root=/dev/sda1 rootfstype=${fs} " \
302 "rootwait rw ${video} ${extra}; " \
303 "if run loadfdt; then " \
304 "bootm ${loadaddr} - ${fdt_addr}; " \
310 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
311 "usb start && usb dev ${disk} && " \
312 "setenv dtype usb; run loadscript; " \
313 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
314 "setenv bootargs console=${console},${baudrate} " \
315 "root=/dev/sda1 rootfstype=${fs} " \
316 "rootwait rw ${video} ${extra}; " \
317 "if run loadfdt; then " \
318 "bootm ${loadaddr} - ${fdt_addr}; " \
324 #ifdef CONFIG_SPI_FLASH
325 #define CONFIG_EXTRA_ENV_SETTINGS \
326 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
327 "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
328 "image_uboot=ventana/u-boot_spi.imx\0" \
330 "spi_koffset=0x90000\0" \
331 "spi_klen=0x200000\0" \
333 "spi_updateuboot=echo Updating uboot from " \
334 "${serverip}:${image_uboot}...; " \
335 "tftpboot ${loadaddr} ${image_uboot} && " \
336 "sf probe && sf erase 0 80000 && " \
337 "sf write ${loadaddr} 400 ${filesize}\0" \
338 "spi_update=echo Updating OS from ${serverip}:${image_os} " \
339 "to ${spi_koffset} ...; " \
340 "tftp ${loadaddr} ${image_os} && " \
342 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
346 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
347 "setenv bootargs console=${console},${baudrate} " \
348 "root=/dev/mtdblock3 " \
349 "rootfstype=squashfs,jffs2 " \
350 "${video} ${extra}; " \
354 #define CONFIG_EXTRA_ENV_SETTINGS \
355 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
357 "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
358 "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
359 "tftp ${loadaddr} ${image_rootfs} && " \
360 "nand erase.part rootfs && " \
361 "nand write ${loadaddr} rootfs ${filesize}\0" \
364 "setenv fsload 'ubifsload'; " \
365 "ubi part rootfs; " \
366 "if ubi check boot; then " \
367 "ubifsmount ubi0:boot; " \
368 "setenv root ubi0:rootfs ubi.mtd=2 " \
369 "rootfstype=squashfs,ubifs; " \
371 "elif ubi check rootfs; then " \
372 "ubifsmount ubi0:rootfs; " \
373 "setenv root ubi0:rootfs ubi.mtd=2 " \
374 "rootfstype=ubifs; " \
376 "setenv dtype nand; run loadscript; " \
377 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
378 "setenv bootargs console=${console},${baudrate} " \
379 "root=${root} ${video} ${extra}; " \
380 "if run loadfdt; then " \
382 "bootm ${loadaddr} - ${fdt_addr}; " \
384 "ubifsumount; bootm; " \
389 #define CONFIG_BOOTCOMMAND \
390 "for btype in ${bootdevs}; do " \
391 "echo; echo Attempting ${btype} boot...; " \
392 "if run ${btype}_boot; then; fi; " \
395 #endif /* __CONFIG_H */