include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 /* Location in NAND to read U-Boot from */
  12 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
  13
  14 /* Falcon Mode */
  15 #define CONFIG_CMD_SPL
  16 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  17 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
  18
  19 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
  20 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
  21 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
  22
  23 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  24 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
  25 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  26 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
  27
  28 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  29 #include "mx6_common.h"
  30 #define CONFIG_DISPLAY_BOARDINFO_LATE
  31
  32 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  33
  34 /* Serial ATAG */
  35 #define CONFIG_SERIAL_TAG
  36
  37 /* Size of malloc() pool */
  38 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  39
  40 /* Init Functions */
  41 #define CONFIG_MISC_INIT_R
  42
  43 /* Driver Model */
  44 #ifndef CONFIG_SPL_BUILD
  45 #define CONFIG_DM_GPIO
  46 #define CONFIG_DM_THERMAL
  47 #endif
  48
  49 /* Thermal */
  50 #define CONFIG_IMX_THERMAL
  51
  52 /* Serial */
  53 #define CONFIG_MXC_UART
  54 #define CONFIG_MXC_UART_BASE           UART2_BASE
  55
  56 #ifdef CONFIG_SPI_FLASH
  57
  58 /* SPI */
  59 #ifdef CONFIG_CMD_SF
  60   #define CONFIG_MXC_SPI
  61   #define CONFIG_SPI_FLASH_MTD
  62   #define CONFIG_SPI_FLASH_BAR
  63   #define CONFIG_SF_DEFAULT_BUS              0
  64   #define CONFIG_SF_DEFAULT_CS               0
  65                                              /* GPIO 3-19 (21248) */
  66   #define CONFIG_SF_DEFAULT_SPEED            30000000
  67   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  68 #endif
  69
  70 #elif defined(CONFIG_SPL_NAND_SUPPORT)
  71 /* Enable NAND support */
  72 #define CONFIG_CMD_NAND
  73 #define CONFIG_CMD_NAND_TRIMFFS
  74 #ifdef CONFIG_CMD_NAND
  75   #define CONFIG_NAND_MXS
  76   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  77   #define CONFIG_SYS_NAND_BASE          0x40000000
  78   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  79   #define CONFIG_SYS_NAND_ONFI_DETECTION
  80
  81   /* DMA stuff, needed for GPMI/MXS NAND support */
  82   #define CONFIG_APBH_DMA
  83   #define CONFIG_APBH_DMA_BURST
  84   #define CONFIG_APBH_DMA_BURST8
  85 #endif
  86
  87 #endif /* CONFIG_SPI_FLASH */
  88
  89 /* I2C Configs */
  90 #define CONFIG_SYS_I2C
  91 #define CONFIG_SYS_I2C_MXC
  92 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  93 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  94 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  95 #define CONFIG_SYS_I2C_SPEED            100000
  96 #define CONFIG_I2C_GSC                  0
  97 #define CONFIG_I2C_EDID
  98
  99 /* MMC Configs */
 100 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 101
 102 /* eMMC Configs */
 103 #define CONFIG_SUPPORT_EMMC_BOOT
 104 #define CONFIG_SUPPORT_EMMC_RPMB
 105
 106 /* Filesystem support */
 107 #define CONFIG_CMD_UBIFS
 108
 109 /*
 110  * SATA Configs
 111  */
 112 #define CONFIG_CMD_SATA
 113 #ifdef CONFIG_CMD_SATA
 114   #define CONFIG_DWC_AHSATA
 115   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 116   #define CONFIG_DWC_AHSATA_PORT_ID     0
 117   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 118   #define CONFIG_LBA48
 119   #define CONFIG_LIBATA
 120 #endif
 121
 122 /*
 123  * PCI express
 124  */
 125 #define CONFIG_CMD_PCI
 126 #ifdef CONFIG_CMD_PCI
 127 #define CONFIG_PCI_SCAN_SHOW
 128 #define CONFIG_PCI_FIXUP_DEV
 129 #define CONFIG_PCIE_IMX
 130 #endif
 131
 132 /*
 133  * PMIC
 134  */
 135 #define CONFIG_POWER
 136 #define CONFIG_POWER_I2C
 137 #define CONFIG_POWER_PFUZE100
 138 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 139 #define CONFIG_POWER_LTC3676
 140 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 141
 142 /* Various command support */
 143 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 144 #define CONFIG_CMD_UNZIP         /* gzwrite */
 145 #define CONFIG_RBTREE
 146
 147 /* Ethernet support */
 148 #define CONFIG_FEC_MXC
 149 #define CONFIG_MII
 150 #define IMX_FEC_BASE             ENET_BASE_ADDR
 151 #define CONFIG_FEC_XCV_TYPE      RGMII
 152 #define CONFIG_FEC_MXC_PHYADDR   0
 153 #define CONFIG_ARP_TIMEOUT       200UL
 154
 155 /* USB Configs */
 156 #define CONFIG_USB_HOST_ETHER
 157 #define CONFIG_USB_ETHER_ASIX
 158 #define CONFIG_USB_ETHER_SMSC95XX
 159 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 160 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 161 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 162 #define CONFIG_MXC_USB_FLAGS      0
 163 #define CONFIG_USBD_HS
 164 #define CONFIG_USB_ETHER
 165 #define CONFIG_USB_ETH_CDC
 166 #define CONFIG_NETCONSOLE
 167 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 168
 169 /* USB Mass Storage Gadget */
 170 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 171
 172 /* Framebuffer and LCD */
 173 #define CONFIG_VIDEO_IPUV3
 174 #define CONFIG_VIDEO_LOGO
 175 #define CONFIG_IPUV3_CLK          260000000
 176 #define CONFIG_CMD_HDMIDETECT
 177 #define CONFIG_IMX_HDMI
 178 #define CONFIG_IMX_VIDEO_SKIP
 179 #define CONFIG_VIDEO_BMP_LOGO
 180 #define CONFIG_SPLASH_SCREEN_ALIGN
 181 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
 182
 183 /* Miscellaneous configurable options */
 184 #define CONFIG_HWCONFIG
 185 #define CONFIG_PREBOOT
 186
 187 /* Print Buffer Size */
 188 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 189
 190 /* Memory configuration */
 191 #define CONFIG_SYS_MEMTEST_START       0x10000000
 192 #define CONFIG_SYS_MEMTEST_END         0x10010000
 193 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 194
 195 /* Physical Memory Map */
 196 #define CONFIG_NR_DRAM_BANKS           1
 197 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 198 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 199 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 200 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 201
 202 #define CONFIG_SYS_INIT_SP_OFFSET \
 203         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 204 #define CONFIG_SYS_INIT_SP_ADDR \
 205         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 206
 207 /*
 208  * MTD Command for mtdparts
 209  */
 210 #define CONFIG_LZO
 211 #define CONFIG_CMD_MTDPARTS
 212 #define CONFIG_MTD_DEVICE
 213 #define CONFIG_MTD_PARTITIONS
 214 #ifdef CONFIG_SPI_FLASH
 215 #define MTDIDS_DEFAULT    "nor0=nor"
 216 #define MTDPARTS_DEFAULT  \
 217         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 218 #else
 219 #define MTDIDS_DEFAULT    "nand0=nand"
 220 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 221 #endif
 222
 223 /* Persistent Environment Config */
 224 #ifdef CONFIG_SPI_FLASH
 225   #define CONFIG_ENV_IS_IN_SPI_FLASH
 226 #elif defined(CONFIG_SPL_NAND_SUPPORT)
 227   #define CONFIG_ENV_IS_IN_NAND
 228 #else
 229   #define CONFIG_ENV_IS_IN_MMC
 230 #endif
 231 #if defined(CONFIG_ENV_IS_IN_MMC)
 232   #define CONFIG_SYS_MMC_ENV_DEV         0
 233   #define CONFIG_SYS_MMC_ENV_PART        1
 234   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
 235   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
 236   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
 237 #elif defined(CONFIG_ENV_IS_IN_NAND)
 238   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
 239   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 240   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 241   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
 242   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 243 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 244   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
 245   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
 246   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
 247   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 248   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 249   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 250   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 251 #endif
 252
 253 /* Environment */
 254 #define CONFIG_IPADDR             192.168.1.1
 255 #define CONFIG_SERVERIP           192.168.1.146
 256
 257 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 258         "pcidisable=1\0" \
 259         "splashpos=m,m\0" \
 260         "usb_pgood_delay=2000\0" \
 261         "console=ttymxc1\0" \
 262         "bootdevs=usb mmc sata flash\0" \
 263         "hwconfig=_UNKNOWN_\0" \
 264         "video=\0" \
 265         \
 266         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 267         "mtdids=" MTDIDS_DEFAULT "\0" \
 268         "disk=0\0" \
 269         "part=1\0" \
 270         \
 271         "fdt_high=0xffffffff\0" \
 272         "fdt_addr=0x18000000\0" \
 273         "initrd_high=0xffffffff\0" \
 274         "fixfdt=" \
 275                 "fdt addr ${fdt_addr}\0" \
 276         "bootdir=boot\0" \
 277         "loadfdt=" \
 278                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
 279                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
 280                         "run fixfdt; " \
 281                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
 282                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
 283                         "run fixfdt; " \
 284                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
 285                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
 286                         "run fixfdt; " \
 287                 "fi\0" \
 288         \
 289         "fs=ext4\0" \
 290         "script=6x_bootscript-ventana\0" \
 291         "loadscript=" \
 292                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
 293                         "source ${loadaddr}; " \
 294                 "fi\0" \
 295         \
 296         "uimage=uImage\0" \
 297         "mmc_root=mmcblk0p1\0" \
 298         "mmc_boot=" \
 299                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
 300                 "mmc dev ${disk} && mmc rescan && " \
 301                 "setenv dtype mmc; run loadscript; " \
 302                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 303                         "setenv bootargs console=${console},${baudrate} " \
 304                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
 305                                 "rootwait rw ${video} ${extra}; " \
 306                         "if run loadfdt; then " \
 307                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 308                         "else " \
 309                                 "bootm; " \
 310                         "fi; " \
 311                 "fi\0" \
 312         \
 313         "sata_boot=" \
 314                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
 315                 "sata init && " \
 316                 "setenv dtype sata; run loadscript; " \
 317                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 318                         "setenv bootargs console=${console},${baudrate} " \
 319                                 "root=/dev/sda1 rootfstype=${fs} " \
 320                                 "rootwait rw ${video} ${extra}; " \
 321                         "if run loadfdt; then " \
 322                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 323                         "else " \
 324                                 "bootm; " \
 325                         "fi; " \
 326                 "fi\0" \
 327         "usb_boot=" \
 328                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
 329                 "usb start && usb dev ${disk} && " \
 330                 "setenv dtype usb; run loadscript; " \
 331                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 332                         "setenv bootargs console=${console},${baudrate} " \
 333                                 "root=/dev/sda1 rootfstype=${fs} " \
 334                                 "rootwait rw ${video} ${extra}; " \
 335                         "if run loadfdt; then " \
 336                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 337                         "else " \
 338                                 "bootm; " \
 339                         "fi; " \
 340                 "fi\0"
 341
 342 #ifdef CONFIG_SPI_FLASH
 343         #define CONFIG_EXTRA_ENV_SETTINGS \
 344         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 345         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 346         "image_uboot=ventana/u-boot_spi.imx\0" \
 347         \
 348         "spi_koffset=0x90000\0" \
 349         "spi_klen=0x200000\0" \
 350         \
 351         "spi_updateuboot=echo Updating uboot from " \
 352                 "${serverip}:${image_uboot}...; " \
 353                 "tftpboot ${loadaddr} ${image_uboot} && " \
 354                 "sf probe && sf erase 0 80000 && " \
 355                         "sf write ${loadaddr} 400 ${filesize}\0" \
 356         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 357                 "to ${spi_koffset} ...; " \
 358                 "tftp ${loadaddr} ${image_os} && " \
 359                 "sf probe && " \
 360                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 361         \
 362         "flash_boot=" \
 363                 "if sf probe && " \
 364                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 365                         "setenv bootargs console=${console},${baudrate} " \
 366                                 "root=/dev/mtdblock3 " \
 367                                 "rootfstype=squashfs,jffs2 " \
 368                                 "${video} ${extra}; " \
 369                         "bootm; " \
 370                 "fi\0"
 371 #else
 372         #define CONFIG_EXTRA_ENV_SETTINGS \
 373         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 374         \
 375         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 376         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 377                 "tftp ${loadaddr} ${image_rootfs} && " \
 378                 "nand erase.part rootfs && " \
 379                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 380         \
 381         "flash_boot=" \
 382                 "setenv fsload 'ubifsload'; " \
 383                 "ubi part rootfs; " \
 384                 "if ubi check boot; then " \
 385                         "ubifsmount ubi0:boot; " \
 386                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 387                                 "rootfstype=squashfs,ubifs; " \
 388                         "setenv bootdir; " \
 389                 "elif ubi check rootfs; then " \
 390                         "ubifsmount ubi0:rootfs; " \
 391                         "setenv root ubi0:rootfs ubi.mtd=2 " \
 392                                 "rootfstype=ubifs; " \
 393                 "fi; " \
 394                 "setenv dtype nand; run loadscript; " \
 395                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
 396                         "setenv bootargs console=${console},${baudrate} " \
 397                                 "root=${root} ${video} ${extra}; " \
 398                         "if run loadfdt; then " \
 399                                 "ubifsumount; " \
 400                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 401                         "else " \
 402                                 "ubifsumount; bootm; " \
 403                         "fi; " \
 404                 "fi\0"
 405 #endif
 406
 407 #define CONFIG_BOOTCOMMAND \
 408         "for btype in ${bootdevs}; do " \
 409                 "echo; echo Attempting ${btype} boot...; " \
 410                 "if run ${btype}_boot; then; fi; " \
 411         "done"
 412
 413 #endif                         /* __CONFIG_H */