3 * Corscience GmbH & Co.KG, Andreas Bießmann <biessmann@corscience.de>
5 * Configuration settings for the grasshopper (ICnova AP7000) board
7 * SPDX-License-Identifier: GPL-2.0+
9 #ifndef __GRASSHOPPER_CONFIG_H
10 #define __GRASSHOPPER_CONFIG_H
12 #include <asm/arch/hardware.h>
15 #define CONFIG_AT32AP7000
18 * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
19 * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
21 * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
24 #define CONFIG_SYS_POWER_MANAGER
25 #define CONFIG_SYS_OSC0_HZ 20000000
26 #define CONFIG_SYS_PLL0_DIV 1
27 #define CONFIG_SYS_PLL0_MUL 7
28 #define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
30 * Set the CPU running at:
31 * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
33 #define CONFIG_SYS_CLKDIV_CPU 0
35 * Set the HSB running at:
36 * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
38 #define CONFIG_SYS_CLKDIV_HSB 1
40 * Set the PBA running at:
41 * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
43 #define CONFIG_SYS_CLKDIV_PBA 2
45 * Set the PBB running at:
46 * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
48 #define CONFIG_SYS_CLKDIV_PBB 1
50 /* Reserve VM regions for SDRAM and NOR flash */
51 #define CONFIG_SYS_NR_VM_REGIONS 2
54 * The PLLOPT register controls the PLL like this:
58 * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
60 #define CONFIG_SYS_PLL0_OPT 0x04
62 #define CONFIG_USART_BASE ATMEL_BASE_USART1
63 #define CONFIG_USART_ID 1
65 #define CONFIG_SYS_GENERIC_BOARD
66 #define CONFIG_BOARD_EARLY_INIT_F
67 #define CONFIG_BOARD_EARLY_INIT_R
69 /* User serviceable stuff */
70 #define CONFIG_CMDLINE_TAG
71 #define CONFIG_SETUP_MEMORY_TAGS
72 #define CONFIG_INITRD_TAG
74 #define CONFIG_STACKSIZE (2048)
76 #define CONFIG_BAUDRATE 115200
79 * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
80 * data on the serial line may interrupt the boot sequence.
82 #define CONFIG_BOOTDELAY 1
83 #define CONFIG_AUTOBOOT
84 #define CONFIG_AUTOBOOT_KEYED
85 #define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d" \
86 " seconds\n", bootdelay
87 #define CONFIG_AUTOBOOT_DELAY_STR "d"
88 #define CONFIG_AUTOBOOT_STOP_STR " "
91 * After booting the board for the first time, new ethernet addresses
92 * should be generated and assigned to the environment variables
93 * "ethaddr". This is normally done during production.
95 #define CONFIG_OVERWRITE_ETHADDR_ONCE
100 #define CONFIG_BOOTP_SUBNETMASK
101 #define CONFIG_BOOTP_GATEWAY
104 * Command line configuration.
106 #include <config_cmd_default.h>
108 /* remove unneeded commands */
109 #undef CONFIG_CMD_FPGA
110 #undef CONFIG_CMD_SETGETDCR
112 /* add useful commands */
113 #define CONFIG_CMD_ASKENV
114 #define CONFIG_CMD_DHCP
115 #define CONFIG_CMD_JFFS2
116 #define CONFIG_CMD_PING
117 #define CONFIG_CMD_REGINFO
119 #define CONFIG_SYS_HUSH_PARSER
120 #define CONFIG_AUTO_COMPLETE
121 #define CONFIG_CMDLINE_EDITING
123 #define CONFIG_ATMEL_USART
125 #define CONFIG_PORTMUX_PIO
126 #define CONFIG_SYS_NR_PIOS 5
127 #define CONFIG_SYS_HSDRAMC
129 #define CONFIG_SYS_DCACHE_LINESZ 32
130 #define CONFIG_SYS_ICACHE_LINESZ 32
132 #define CONFIG_NR_DRAM_BANKS 1
134 #define CONFIG_SYS_FLASH_CFI
135 #define CONFIG_FLASH_CFI_DRIVER
137 #define CONFIG_SYS_FLASH_BASE 0x00000000
138 #define CONFIG_SYS_FLASH_SIZE 0x800000
139 #define CONFIG_SYS_MAX_FLASH_BANKS 1
140 #define CONFIG_SYS_MAX_FLASH_SECT 135
142 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
143 #define CONFIG_SYS_TEXT_BASE 0x00000000
145 #define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
146 #define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
147 #define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
149 #define CONFIG_ENV_IS_IN_FLASH
150 /* place u-boot env in flash sector after u-boot */
151 #define CONFIG_ENV_SIZE 0x10000
152 #define CONFIG_ENV_ADDR 0x20000
154 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + \
155 CONFIG_SYS_INTRAM_SIZE)
157 #define CONFIG_SYS_MALLOC_LEN (256*1024)
159 /* Allow 4MB for the kernel run-time image */
160 #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
161 #define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
163 /* Other configuration settings that shouldn't have to change all that often */
164 #define CONFIG_SYS_PROMPT "U-Boot> "
165 #define CONFIG_SYS_CBSIZE 256
166 #define CONFIG_SYS_MAXARGS 16
167 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
168 sizeof(CONFIG_SYS_PROMPT) + 16)
169 #define CONFIG_SYS_LONGHELP
171 #define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
172 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x700000)
174 #endif /* __GRASSHOPPER_CONFIG_H */
175 /* vim: set ts=8 noet: */