2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
4 * Based on dockstar.h originally written by
5 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
7 * Based on sheevaplug.h originally written by
8 * Prafulla Wadaskar <prafulla@marvell.com>
10 * Marvell Semiconductor <www.marvell.com>
12 * SPDX-License-Identifier: GPL-2.0+
15 #ifndef _CONFIG_GOFLEXHOME_H
16 #define _CONFIG_GOFLEXHOME_H
18 #define CONFIG_SYS_GENERIC_BOARD
21 * Version number information
23 #define CONFIG_IDENT_STRING "\nSeagate GoFlex Home"
26 * High Level Configuration Options (easy to change)
28 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
29 #define CONFIG_KW88F6281 1 /* SOC Name */
30 #define CONFIG_MACH_GOFLEXHOME /* Machine type */
31 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
34 * Default GPIO configuration and LED status
36 #define GOFLEXHOME_OE_LOW (~(0))
37 #define GOFLEXHOME_OE_HIGH (~(0))
38 #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
39 #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
42 #define MV88E1116_LED_FCTRL_REG 10
43 #define MV88E1116_CPRSP_CR3_REG 21
44 #define MV88E1116_MAC_CTRL_REG 21
45 #define MV88E1116_PGADR_REG 22
46 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
47 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
50 * Commands configuration
52 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
53 #define CONFIG_CONSOLE_MUX
54 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
56 #include <config_cmd_default.h>
57 #define CONFIG_CMD_DHCP
58 #define CONFIG_CMD_ENV
59 #define CONFIG_CMD_MII
60 #define CONFIG_CMD_NAND
61 #define CONFIG_CMD_PING
62 #define CONFIG_CMD_USB
63 #define CONFIG_CMD_IDE
64 #define CONFIG_CMD_DATE
65 #define CONFIG_CMD_EXT4
66 #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
69 * mv-common.h should be defined after CMD configs since it used them
70 * to enable certain macros
72 #include "mv-common.h"
74 #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
75 #define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */
78 * Environment variables configurations
80 #ifdef CONFIG_CMD_NAND
81 #define CONFIG_ENV_IS_IN_NAND 1
82 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
84 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
87 * max 4k env size is enough, but in case of nand
88 * it has to be rounded to sector size
90 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
91 #define CONFIG_ENV_ADDR 0xC0000
92 #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
95 * Default environment variables
97 #define CONFIG_BOOTCOMMAND \
98 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
100 "ubifsmount ubi:root; " \
101 "ubifsload 0x800000 ${kernel}; " \
104 #define CONFIG_MTDPARTS \
105 "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
107 #define CONFIG_EXTRA_ENV_SETTINGS \
108 "console=console=ttyS0,115200\0" \
109 "mtdids=nand0=orion_nand\0" \
110 "mtdparts="CONFIG_MTDPARTS \
111 "kernel=/boot/uImage\0" \
112 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
115 * Ethernet Driver configuration
117 #ifdef CONFIG_CMD_NET
118 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
119 #define CONFIG_PHY_BASE_ADR 0
120 #endif /* CONFIG_CMD_NET */
123 * * SATA Driver configuration
125 #ifdef CONFIG_MVSATA_IDE
126 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
127 #endif /*CONFIG_MVSATA_IDE*/
130 * * RTC driver configuration
132 #ifdef CONFIG_CMD_DATE
133 #define CONFIG_RTC_MV
134 #endif /* CONFIG_CMD_DATE */
136 #endif /* _CONFIG_GOFLEXHOME_H */