include/configs/ge_bx50v3.h

   1 /*
   2  * Copyright (C) 2015 Timesys Corporation
   3  * Copyright (C) 2015 General Electric Company
   4  * Copyright (C) 2014 Advantech
   5  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   6  *
   7  * Configuration settings for the GE MX6Q Bx50v3 boards.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __GE_BX50V3_CONFIG_H
  13 #define __GE_BX50V3_CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16 #include <asm/imx-common/gpio.h>
  17
  18 #if defined(CONFIG_TARGET_GE_B450V3)
  19 #define CONFIG_BOARD_NAME       "General Electric B450v3"
  20 #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b450v3.dtb"
  21 #elif defined(CONFIG_TARGET_GE_B650V3)
  22 #define CONFIG_BOARD_NAME       "General Electric B650v3"
  23 #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b650v3.dtb"
  24 #elif defined(CONFIG_TARGET_GE_B850V3)
  25 #define CONFIG_BOARD_NAME       "General Electric B850v3"
  26 #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b850v3.dtb"
  27 #else
  28 #define CONFIG_BOARD_NAME       "General Electric BA16 Generic"
  29 #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-ba16.dtb"
  30 #endif
  31
  32 #define CONFIG_MXC_UART_BASE    UART3_BASE
  33 #define CONFIG_CONSOLE_DEV      "ttymxc2"
  34
  35 #define PHYS_SDRAM_SIZE         (2u * 1024 * 1024 * 1024)
  36
  37 #define CONFIG_SUPPORT_EMMC_BOOT
  38
  39 #define CONFIG_BOOTDELAY               1
  40
  41 #include "mx6_common.h"
  42 #include <linux/sizes.h>
  43
  44 #define CONFIG_DISPLAY_CPUINFO
  45 #define CONFIG_DISPLAY_BOARDINFO
  46
  47 #define CONFIG_CMDLINE_TAG
  48 #define CONFIG_SETUP_MEMORY_TAGS
  49 #define CONFIG_INITRD_TAG
  50 #define CONFIG_REVISION_TAG
  51 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  52
  53 #define CONFIG_BOARD_EARLY_INIT_F
  54 #define CONFIG_BOARD_LATE_INIT
  55
  56 #define CONFIG_MXC_GPIO
  57 #define CONFIG_MXC_UART
  58
  59 #define CONFIG_CMD_FUSE
  60 #define CONFIG_MXC_OCOTP
  61
  62 /* SATA Configs */
  63 #define CONFIG_CMD_SATA
  64 #define CONFIG_DWC_AHSATA
  65 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  66 #define CONFIG_DWC_AHSATA_PORT_ID       0
  67 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  68 #define CONFIG_LBA48
  69 #define CONFIG_LIBATA
  70
  71 /* MMC Configs */
  72 #define CONFIG_FSL_ESDHC
  73 #define CONFIG_FSL_USDHC
  74 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  75 #define CONFIG_MMC
  76 #define CONFIG_CMD_MMC
  77 #define CONFIG_GENERIC_MMC
  78 #define CONFIG_BOUNCE_BUFFER
  79 #define CONFIG_CMD_EXT2
  80 #define CONFIG_CMD_FAT
  81 #define CONFIG_DOS_PARTITION
  82
  83 /* USB Configs */
  84 #define CONFIG_CMD_USB
  85 #define CONFIG_CMD_FAT
  86 #define CONFIG_USB_EHCI
  87 #define CONFIG_USB_EHCI_MX6
  88 #define CONFIG_USB_STORAGE
  89 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  90 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  91 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  92 #define CONFIG_MXC_USB_FLAGS    0
  93 #define CONFIG_USB_KEYBOARD
  94 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  95
  96 #define CONFIG_CI_UDC
  97 #define CONFIG_USBD_HS
  98 #define CONFIG_USB_GADGET_DUALSPEED
  99 #define CONFIG_USB_GADGET
 100 #define CONFIG_USB_GADGET_DOWNLOAD
 101 #define CONFIG_CMD_USB_MASS_STORAGE
 102 #define CONFIG_USB_GADGET_MASS_STORAGE
 103 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 104 #define CONFIG_USB_GADGET_VBUS_DRAW 2
 105 #define CONFIG_G_DNL_VENDOR_NUM   0x0525
 106 #define CONFIG_G_DNL_PRODUCT_NUM  0xa4a5
 107 #define CONFIG_G_DNL_MANUFACTURER "Advantech"
 108
 109 /* Networking Configs */
 110 #define CONFIG_CMD_PING
 111 #define CONFIG_CMD_DHCP
 112 #define CONFIG_CMD_MII
 113 #define CONFIG_FEC_MXC
 114 #define CONFIG_MII
 115 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 116 #define CONFIG_FEC_XCV_TYPE             RGMII
 117 #define CONFIG_ETHPRIME         "FEC"
 118 #define CONFIG_FEC_MXC_PHYADDR          4
 119 #define CONFIG_PHYLIB
 120 #define CONFIG_PHY_ATHEROS
 121
 122 /* Serial Flash */
 123 #define CONFIG_CMD_SF
 124 #ifdef CONFIG_CMD_SF
 125 #define CONFIG_MXC_SPI
 126 #define CONFIG_SF_DEFAULT_BUS           0
 127 #define CONFIG_SF_DEFAULT_CS            0
 128 #define CONFIG_SF_DEFAULT_SPEED 20000000
 129 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 130 #endif
 131
 132 /* allow to overwrite serial and ethaddr */
 133 #define CONFIG_ENV_OVERWRITE
 134 #define CONFIG_CONS_INDEX       1
 135 #define CONFIG_BAUDRATE 115200
 136
 137 /* Command definition */
 138 #define CONFIG_CMD_BMODE
 139 #define CONFIG_CMD_BOOTZ
 140 #undef CONFIG_CMD_IMLS
 141
 142 #define CONFIG_LOADADDR 0x12000000
 143 #define CONFIG_SYS_TEXT_BASE    0x17800000
 144
 145 #define CONFIG_EXTRA_ENV_SETTINGS \
 146         "script=boot.scr\0" \
 147         "image=/boot/uImage\0" \
 148         "uboot=u-boot.imx\0" \
 149         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 150         "fdt_addr=0x18000000\0" \
 151         "boot_fdt=yes\0" \
 152         "ip_dyn=yes\0" \
 153         "console=" CONFIG_CONSOLE_DEV "\0" \
 154         "fdt_high=0xffffffff\0"   \
 155         "initrd_high=0xffffffff\0" \
 156         "sddev=0\0" \
 157         "emmcdev=1\0" \
 158         "partnum=1\0" \
 159         "update_sd_firmware=" \
 160                 "if test ${ip_dyn} = yes; then " \
 161                         "setenv get_cmd dhcp; " \
 162                 "else " \
 163                         "setenv get_cmd tftp; " \
 164                 "fi; " \
 165                 "if mmc dev ${mmcdev}; then "   \
 166                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 167                                 "setexpr fw_sz ${filesize} / 0x200; " \
 168                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 169                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 170                         "fi; "  \
 171                 "fi\0" \
 172         "update_sf_uboot=" \
 173                 "if tftp $loadaddr $uboot; then " \
 174                         "sf probe; " \
 175                         "sf erase 0 0xC0000; " \
 176                         "sf write $loadaddr 0x400 $filesize; " \
 177                         "echo 'U-Boot upgraded. Please reset'; " \
 178                 "fi\0" \
 179         "setargs=setenv bootargs console=${console},${baudrate} " \
 180                 "root=/dev/${rootdev} rw rootwait cma=128M\0" \
 181         "loadbootscript=" \
 182                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 183         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
 184                 " source\0" \
 185         "loadimage=" \
 186                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 187         "loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
 188         "tryboot=" \
 189                 "if run loadbootscript; then " \
 190                         "run bootscript; " \
 191                 "else " \
 192                         "if run loadimage; then " \
 193                                 "run doboot; " \
 194                         "fi; " \
 195                 "fi;\0" \
 196         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 197                 "run setargs; " \
 198                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 199                         "if run loadfdt; then " \
 200                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 201                         "else " \
 202                                 "if test ${boot_fdt} = try; then " \
 203                                         "bootm; " \
 204                                 "else " \
 205                                         "echo WARN: Cannot load the DT; " \
 206                                 "fi; " \
 207                         "fi; " \
 208                 "else " \
 209                         "bootm; " \
 210                 "fi;\0" \
 211         "netargs=setenv bootargs console=${console},${baudrate} " \
 212                 "root=/dev/nfs " \
 213                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 214         "netboot=echo Booting from net ...; " \
 215                 "run netargs; " \
 216                 "if test ${ip_dyn} = yes; then " \
 217                         "setenv get_cmd dhcp; " \
 218                 "else " \
 219                         "setenv get_cmd tftp; " \
 220                 "fi; " \
 221                 "${get_cmd} ${image}; " \
 222                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 223                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 224                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 225                         "else " \
 226                                 "if test ${boot_fdt} = try; then " \
 227                                         "bootm; " \
 228                                 "else " \
 229                                         "echo WARN: Cannot load the DT; " \
 230                                 "fi; " \
 231                         "fi; " \
 232                 "else " \
 233                         "bootm; " \
 234                 "fi;\0" \
 235
 236 #define CONFIG_BOOTCOMMAND \
 237         "usb start; " \
 238         "setenv dev usb; " \
 239         "setenv devnum 0; " \
 240         "setenv rootdev sda1; " \
 241         "run tryboot; " \
 242         \
 243         "setenv dev mmc; " \
 244         "setenv rootdev mmcblk0p1; " \
 245         \
 246         "setenv devnum ${sddev}; " \
 247         "if mmc dev ${devnum}; then " \
 248                 "run tryboot; " \
 249                 "setenv rootdev mmcblk1p1; " \
 250         "fi; " \
 251         \
 252         "setenv devnum ${emmcdev}; " \
 253         "if mmc dev ${devnum}; then " \
 254                 "run tryboot; " \
 255         "fi; " \
 256         \
 257         "bmode usb; " \
 258
 259 #define CONFIG_ARP_TIMEOUT     200UL
 260
 261 /* Miscellaneous configurable options */
 262 #define CONFIG_SYS_LONGHELP
 263 #define CONFIG_SYS_HUSH_PARSER
 264 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 265 #define CONFIG_AUTO_COMPLETE
 266
 267 /* Print Buffer Size */
 268 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 269 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 270
 271 #define CONFIG_SYS_MEMTEST_START       0x10000000
 272 #define CONFIG_SYS_MEMTEST_END         0x10010000
 273 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 274
 275 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 276
 277 #define CONFIG_CMDLINE_EDITING
 278 #define CONFIG_STACKSIZE               (128 * 1024)
 279
 280 /* Physical Memory Map */
 281 #define CONFIG_NR_DRAM_BANKS           1
 282 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 283
 284 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 285 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 286 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 287
 288 #define CONFIG_SYS_INIT_SP_OFFSET \
 289         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 290 #define CONFIG_SYS_INIT_SP_ADDR \
 291         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 292
 293 /* FLASH and environment organization */
 294 #define CONFIG_SYS_NO_FLASH
 295
 296 #define CONFIG_ENV_IS_IN_SPI_FLASH
 297 #define CONFIG_ENV_SIZE         (8 * 1024)
 298 #define CONFIG_ENV_OFFSET               (768 * 1024)
 299 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 300 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 301 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 302 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 303 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 304
 305 #ifndef CONFIG_SYS_DCACHE_OFF
 306 #define CONFIG_CMD_CACHE
 307 #endif
 308
 309 #define CONFIG_SYS_FSL_USDHC_NUM        3
 310
 311 /* Framebuffer */
 312 #define CONFIG_VIDEO
 313 #define CONFIG_VIDEO_IPUV3
 314 #define CONFIG_CFB_CONSOLE
 315 #define CONFIG_VGA_AS_SINGLE_DEVICE
 316 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 317 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 318 #define CONFIG_VIDEO_BMP_RLE8
 319 #define CONFIG_SPLASH_SCREEN
 320 #define CONFIG_SPLASH_SCREEN_ALIGN
 321 #define CONFIG_BMP_16BPP
 322 #define CONFIG_VIDEO_LOGO
 323 #define CONFIG_VIDEO_BMP_LOGO
 324 #define CONFIG_IPUV3_CLK 260000000
 325 #define CONFIG_IMX_HDMI
 326 #define CONFIG_IMX_VIDEO_SKIP
 327
 328 #undef CONFIG_CMD_PCI
 329 #ifdef CONFIG_CMD_PCI
 330 #define CONFIG_PCI
 331 #define CONFIG_PCI_PNP
 332 #define CONFIG_PCI_SCAN_SHOW
 333 #define CONFIG_PCIE_IMX
 334 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 335 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 336 #endif
 337
 338 /* I2C Configs */
 339 #define CONFIG_CMD_I2C
 340 #define CONFIG_SYS_I2C
 341 #define CONFIG_SYS_I2C_MXC
 342 #define CONFIG_SYS_I2C_SPEED              100000
 343 #define CONFIG_SYS_I2C_MXC_I2C1
 344 #define CONFIG_SYS_I2C_MXC_I2C2
 345 #define CONFIG_SYS_I2C_MXC_I2C3
 346
 347 #endif  /* __GE_BX50V3_CONFIG_H */