2 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_SYNOLOGY_DS414_H
8 #define _CONFIG_SYNOLOGY_DS414_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_DISPLAY_BOARDINFO_LATE
16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
17 * for DDR ECC byte filling in the SPL before loading the main
20 #define CONFIG_SYS_TEXT_BASE 0x00800000
21 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
24 * Commands configuration
26 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
27 #define CONFIG_CMD_DHCP
28 #define CONFIG_CMD_ENV
29 #define CONFIG_CMD_I2C
30 #define CONFIG_CMD_PING
32 #define CONFIG_CMD_SPI
33 #define CONFIG_CMD_TFTPPUT
34 #define CONFIG_CMD_TIME
35 #define CONFIG_CMD_USB
38 #define CONFIG_SYS_I2C
39 #define CONFIG_SYS_I2C_MVTWSI
40 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
41 #define CONFIG_SYS_I2C_SLAVE 0x0
42 #define CONFIG_SYS_I2C_SPEED 100000
44 /* SPI NOR flash default params, used by sf commands */
45 #define CONFIG_SF_DEFAULT_SPEED 1000000
46 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
48 /* Environment in SPI NOR flash */
49 #define CONFIG_ENV_IS_IN_SPI_FLASH
50 #define CONFIG_ENV_OFFSET 0x7E0000 /* RedBoot config partition in DTS */
51 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
52 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
54 #define CONFIG_PHY_MARVELL /* there is a marvell phy */
55 #define CONFIG_PHY_ADDR { 0x1, 0x0 }
56 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
58 #define CONFIG_SYS_ALT_MEMTEST
61 #ifndef CONFIG_SPL_BUILD
63 #define CONFIG_CMD_PCI
64 #define CONFIG_CMD_PCI_ENUM
65 #define CONFIG_PCI_MVEBU
66 #define CONFIG_PCI_SCAN_SHOW
69 /* USB/EHCI/XHCI configuration */
72 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
74 /* FIXME: broken XHCI support
75 * Below defines should enable support for the two rear USB3 ports. Sadly, this
76 * does not work because:
77 * - xhci-pci seems to not support DM_USB, so with that enabled it is not
79 * - USB init fails, controller does not respond in time */
82 #define CONFIG_USB_XHCI
83 #define CONFIG_USB_XHCI_PCI
84 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
87 #if !defined(CONFIG_USB_XHCI)
88 #define CONFIG_USB_EHCI
89 #define CONFIG_USB_EHCI_MARVELL
90 #define CONFIG_EHCI_IS_TDI
93 /* why is this only defined in mv-common.h if CONFIG_DM is undefined? */
94 #define CONFIG_USB_STORAGE
95 #define CONFIG_DOS_PARTITION
96 #define CONFIG_ISO_PARTITION
97 #define CONFIG_SUPPORT_VFAT
98 #define CONFIG_SYS_MVFS
101 * mv-common.h should be defined after CMD configs since it used them
102 * to enable certain macros
104 #include "mv-common.h"
107 * Memory layout while starting into the bin_hdr via the
110 * 0x4000.4000 - 0x4003.4000 headers space (192KiB)
111 * 0x4000.4030 bin_hdr start address
112 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
113 * 0x4007.fffc BootROM stack top
115 * The address space between 0x4007.fffc and 0x400f.fff is not locked in
116 * L2 cache thus cannot be used.
120 /* Defines for SPL */
121 #define CONFIG_SPL_FRAMEWORK
122 #define CONFIG_SPL_TEXT_BASE 0x40004030
123 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
125 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
126 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
128 #ifdef CONFIG_SPL_BUILD
129 #define CONFIG_SYS_MALLOC_SIMPLE
132 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
133 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
135 #define CONFIG_SPL_LIBCOMMON_SUPPORT
136 #define CONFIG_SPL_LIBGENERIC_SUPPORT
137 #define CONFIG_SPL_SERIAL_SUPPORT
138 #define CONFIG_SPL_I2C_SUPPORT
140 /* SPL related SPI defines */
141 #define CONFIG_SPL_SPI_SUPPORT
142 #define CONFIG_SPL_SPI_FLASH_SUPPORT
143 #define CONFIG_SPL_SPI_LOAD
144 #define CONFIG_SPL_SPI_BUS 0
145 #define CONFIG_SPL_SPI_CS 0
146 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
148 /* DS414 bus width is 32bits */
149 #define CONFIG_DDR_32BIT
151 /* Use random ethernet address if not configured */
152 #define CONFIG_LIB_RAND
153 #define CONFIG_NET_RANDOM_ETHADDR
155 /* Default Environment */
156 #define CONFIG_BOOTCOMMAND "sf read ${loadaddr} 0xd0000 0x700000; bootm"
157 #define CONFIG_BOOTARGS "console=ttyS0,115200"
158 #define CONFIG_LOADADDR 0x80000
159 #undef CONFIG_PREBOOT /* override preboot for USB and SPI flash init */
160 #define CONFIG_PREBOOT "usb start; sf probe"
162 #endif /* _CONFIG_SYNOLOGY_DS414_H */