3 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
5 * Based on Kirkwood support:
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * SPDX-License-Identifier: GPL-2.0+
13 #ifndef _CONFIG_DNS325_H
14 #define _CONFIG_DNS325_H
17 * Machine number definition
19 #define CONFIG_MACH_TYPE MACH_TYPE_DNS325
22 * High Level Configuration Options (easy to change)
24 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
25 #define CONFIG_KW88F6281 /* SOC Name */
26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
29 * Commands configuration
31 #define CONFIG_CMD_NAND
32 #define CONFIG_SYS_MVFS
34 #define CONFIG_NR_DRAM_BANKS 1
37 * mv-common.h should be defined after CMD configs since it used them
38 * to enable certain macros
40 #include "mv-common.h"
42 /* Remove or override few declarations from mv-common.h */
45 * Ethernet Driver configuration
48 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
49 #define CONFIG_NETCONSOLE
53 * SATA Driver configuration
55 #ifdef CONFIG_MVSATA_IDE
56 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
57 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
61 * RTC driver configuration
63 #ifdef CONFIG_CMD_DATE
70 #define CONFIG_KIRKWOOD_GPIO
73 * Environment variables configurations
75 #ifdef CONFIG_CMD_NAND
76 #define CONFIG_ENV_IS_IN_NAND
77 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
79 #define CONFIG_ENV_IS_NOWHERE
82 #define CONFIG_ENV_SIZE 0x20000 /* 128KB */
83 #define CONFIG_ENV_ADDR 0xe0000
84 #define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
87 * Default environment variables
89 #define MTDIDS_DEFAULT "nand0=orion_nand"
91 #define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
92 "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
94 #define CONFIG_EXTRA_ENV_SETTINGS \
98 "loadaddr=0x800000\0" \
100 "console=ttyS0,115200\0" \
101 "mtdparts="MTDPARTS_DEFAULT \
103 "bootenv=uEnv.txt\0" \
104 "importbootenv=echo Importing environment ...; " \
105 "env import -t ${loadaddr} ${filesize}\0" \
106 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
107 "setbootargs=setenv bootargs console=${console} " \
110 "root=${bootenvroot} " \
111 "rootfstype=${bootenvrootfstype}\0" \
112 "subbootcmd=run setbootargs; " \
113 "if run bootenvloadimage; then " \
114 "bootm ${loadaddr};" \
116 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
117 "nandrootfstype=ubifs\0" \
118 "nandloadimage=nand read ${loadaddr} kernel\0" \
119 "setnandbootenv=echo Booting from nand ...; " \
120 "setenv bootenvroot ${nandroot}; " \
121 "setenv bootenvrootfstype ${nandrootfstype}; " \
122 "setenv bootenvloadimage ${nandloadimage}\0"
124 #define CONFIG_BOOTCOMMAND \
125 "if test -n ${bootenv} && usb start; then " \
126 "if run loadbootenv; then " \
127 "echo Loaded environment ${bootenv} from usb;" \
128 "run importbootenv;" \
130 "if test -n ${bootenvcmd}; then " \
131 "echo Running bootenvcmd ...;" \
135 "run setnandbootenv subbootcmd;"
137 #endif /* _CONFIG_DNS325_H */